Issue 17, 2016

Sisal-derived activated carbons for cost-effective lithium–sulfur batteries

Abstract

Elemental sulfur was successfully impregnated in an activated carbon (AC) matrix obtained from sisal fibers. The impregnation of sulfur in the activated carbon (S-AC) matrix was confirmed by XRD, SEM and Raman analyses. The sulfurized activated carbon (S-AC) composite electrode was employed as a cathode material for lithium–sulfur (Li–S) cell. The Li–S cell delivered a discharge capacity of 950 mA h g−1 at 0.1C-rate. The electrochemical impedance spectroscopy measurements were carried out for the Li–S cell before and after cycling and also at different depth of discharge and depth of charge. A stable cycling was achieved at 1C-rate.

Graphical abstract: Sisal-derived activated carbons for cost-effective lithium–sulfur batteries

Article information

Article type
Paper
Submitted
22 صفر 1437
Accepted
13 ربيع الثاني 1437
First published
16 ربيع الثاني 1437

RSC Adv., 2016,6, 13772-13779

Sisal-derived activated carbons for cost-effective lithium–sulfur batteries

M. Raja, N. Angulakshmi and A. M. Stephan, RSC Adv., 2016, 6, 13772 DOI: 10.1039/C5RA25850B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements