Issue 17, 2015

Effect of different lead precursors on perovskite solar cell performance and stability

Abstract

We present the use of halide (PbCl2) and non-halide lead precursors (Pb(OAc)2 (OAc = CH3CH2COO), Pb(NO3)2, Pb(acac)2 (acac = (CH3COCHCOCH3)) and PbCO3) for the preparation of perovskite solar cells. We have confirmed by X-ray diffraction the growth of CH3NH3PbI3 in all the analyzed cases, except for PbCO3, independently of the lead precursor used for the synthesis of the perovskite. In addition, different cell configurations, thin films and mesoporous scaffolds, TiO2 or Al2O3, have also been prepared. We have observed that the lead precursor has a strong influence on the structural properties of perovskite (grain size), as well as on the solar cell performance. Photovoltaic conversion efficiencies comparable to those achieved when using the commonly employed PbCl2 have been obtained with Pb(OAc)2 as a lead source. Stability studies of the perovskite films and devices have also been carried out, which demonstrate that the lead precursor also plays a role. The stability is not only strongly affected by atmosphere and illumination conditions, but also by the lead precursor employed for the perovskite synthesis. These results highlight that other lead sources, different to the commonly used PbCl2 and PbI2, are also suitable for the development of PSCs, opening a new way for device performance optimization.

Graphical abstract: Effect of different lead precursors on perovskite solar cell performance and stability

Supplementary files

Article information

Article type
Paper
Submitted
22 محرم 1436
Accepted
16 صفر 1436
First published
17 صفر 1436

J. Mater. Chem. A, 2015,3, 9194-9200

Author version available

Effect of different lead precursors on perovskite solar cell performance and stability

F. K. Aldibaja, L. Badia, E. Mas-Marzá, R. S. Sánchez, E. M. Barea and I. Mora-Sero, J. Mater. Chem. A, 2015, 3, 9194 DOI: 10.1039/C4TA06198E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements