Issue 12, 2005

From well defined star-microgels to highly ordered honeycomb films

Abstract

Star-microgels were prepared in a two-step process known as the arm first approach by Atom Transfer Radical Polymerization (ATRP). Living linear poly(methyl methacrylate) (PMMA), with molecular weight (Mn) of 10 000 and 20 000, was reacted with ethylene glycol dimethacrylate (EGDMA) as crosslinker and varying amounts of methyl methacrylate (MMA) as spacer, under ATRP conditions, to produce star-microgels with Mn ranging from 0.3 × 106 to 1.0 × 106 and number of arms, n(arms) from 11 to 74. As Mn of the arm was increased, a decrease in molecular weight and in the number of arms in the microgel was observed. Star-microgels, with MMA spacer incorporated in the core, were found to have lower molecular weight and lower arm number. The microgels were used as precursors to form honeycomb films. The films were cast under conditions of high humidity which produces condensed water droplets which act as the template for a precipitating polymer. This is the first report of the use of well defined star-microgels to cast highly ordered porous films. It is shown that the pore diameters decrease with increasing number of PMMA arms and with increasing molecular weight of the star-microgel.

Graphical abstract: From well defined star-microgels to highly ordered honeycomb films

Article information

Article type
Paper
Submitted
03 شعبان 1425
Accepted
27 شوال 1425
First published
15 ذو الحجة 1425

J. Mater. Chem., 2005,15, 1286-1292

From well defined star-microgels to highly ordered honeycomb films

L. A. Connal, P. A. Gurr, G. G. Qiao and D. H. Solomon, J. Mater. Chem., 2005, 15, 1286 DOI: 10.1039/B414421J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements