Xitong
Ren
,
Xinyuan
Wang
,
Wen
Song
,
Feng
Bai
and
Yusen
Li
*
Key Laboratory for Special Functional Materials of Ministry of Education, National and Local Joint Engineering Research Center for High-Efficiency Display and Lighting Technology, School of Materials Science and Engineering, and Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004, China. E-mail: liyusen@henu.edu.cn
First published on 1st February 2023
Isomeric covalent organic frameworks possessing the same chemical constitutions but different atomic arrangement structures and physicochemical properties are fascinating branches of covalent organic frameworks (COFs). However, the rational design and targeted synthesis of isomeric COFs remain conundrums, so the investigation of isomeric COFs is still in a fledging period. According to the diversity of frameworks, positional isomers with similar structures and framework isomers having distinct constructions are the main existing subspecies of isomeric COFs. In this review, we focus on the research progress and substantial achievements in this fascinating embranchment and systematically summarize and highlight the design principles of both positional isomeric and framework isomeric COFs, which will potentially facilitate further exploitation and investigation of novel isomeric COFs. The application and structure–property relationship of these isomeric COFs have been briefly introduced. Moreover, key constraints of current isomeric COFs and further advancement of this promising field are proposed and anticipated.
As emerging crystalline organic polymers, covalent organic frameworks (COFs) have drawn much attention and achieved rapid development since the seeding work of Yaghi in 2005.7 Similar to MOFs, COFs possess long range ordered 2D or 3D periodic structures but are linked by various kinds of reversible covalent bonds such as imine, borate, olefin, amine, hydrazone and so forth.8 Good stability and flexibility in design make COFs potential platforms for selective separation, optoelectronic devices, heterogeneous catalysis, biological therapy, chemical sensing, energy storage, etc.8,9 However, the research on isomeric COFs is much confined compared with MOFs, which probably is ascribed to the robust covalent linkage, rigorous synthetic conditions and the limitation of monomer types.10–12 It is difficult to control accurately the confined growth of covalent bonds, which is much less than the confined growth for all other linkages in polymer networks. A precursor with suitable symmetries is one of the key factors affecting the topology and isomerism of COFs. Specifically, for common two-component 2D COFs, only C2 symmetric knots and C2 symmetric linear linkers can afford a Kagome (kgm) or square (sql) topology,12 while other symmetric building units such as C3 + C2, C3 + C3, C4 + C2, C4 + C4, C6 + C2, and C3 + C6 generally result in simplex topological frameworks (Fig. 1).8,11 However, crystalline COFs are usually produced at high reaction temperature, with a long reaction time and in a specific solvent system which are helpful for reversible error correction of dynamic covalent bonds,13 and as a result, stable thermodynamic frameworks with lower energy are commonly generated as the sole products even though the symmetries of building units are satisfied to construct isomeric frameworks in geometry.14–16
In recent years, great efforts have been devoted to exploring isomeric COFs, and the existence of both 2D and 3D COF isomers has been confirmed. Meanwhile, the targeted synthesis of isomeric COFs has been achieved by tactfully modulating molecular design or synthetic conditions. It has been demonstrated that slight differences in these isomeric COFs can contribute to marked differences in their electronic properties, optoelectronic performances, adsorption behaviours, etc., making isomeric COFs fascinating materials and showing their great significance in enriching the diversity and complexity of COFs. As a consequence, a review focusing on the advancement in the description of isomeric COFs is imminently needed to facilitate further development of COFs. To the best of our knowledge, there is no review that generalizes and summarizes the design principles, characteristics, and applications of isomeric COFs to date.
Indeed, COFs with the same topologic framework but different positional linkage structures are common, but investigations of the structure–property relationship originating from positional linkages are scarce.17,18 In 2019, Seki et al. successfully constructed two positional isomeric frameworks (C-AntPy and N-AntPy) from 1,3,6,8-tetrasubstituted pyrene and 9,10-disubstituted anthracene and investigated the property difference of these isomers (Fig. 3).19 Not surprisingly, C-AntPy and N-AntPy present similar chemical constitutions as demonstrated by FT-IR and solid-state 13C NMR spectroscopy. However, the position of the –CN bond slightly affects the absorption and photoluminescence maxima of the two positional isomer films. Intriguingly, C-AntPy revealed a great extent of oxidation after I2 doping, which was confirmed by the increased absorbance, EPR signal, photoconductivity and conductivity, but N-AntPy showed no significant changes before and after doping, which proved that the linkage position does play a crucial role in the optoelectronic performance of these covalently linked materials.
Fig. 3 Synthetic routes to positional isomeric C-AntPy and N-AntPy. Reproduced with permission from ref. 19. Copyright 2019, Royal Society of Chemistry. |
The directionality of linkages also has an impact on the stacking of COFs and gives rise to isomeric structures. In 2018, Zamora et al. reported that IMDEA-COF systems were able to show two possible pore isomers due to the variable orientation of the imine bonds, that is, a big-pore isomer with flat COF layers and a small-pore structure with corrugated COF layers (Fig. 4a).20 The calculated cohesive energy values for the possible structures of these isomers indicate that the big-pore isomer is energetically favoured when electron-donating building blocks are employed. In comparison with the experimental data, IMDEA-COF-1 is concluded to be a mixture of big- and small-pore conformations in the AB stacking mode, whereas IMDEA-COF-2 is predicted to be a unitary AA stacking big-pore structure due to the existence of electron-rich hydroxyl groups. In comparison to pure phase IMDEA-COF-2, the π–π interaction between pyrene units enables minimization thanks to the particular complex structure of IMDEA-COF-1, so the nonradiative energy dissipation is inhibited and a green colour emission at 501 nm with an absolute photoluminescence (PL) quantum yield of 3.5% is exhibited.
Fig. 4 (a) Schematic representation of the syntheses of IMDEA-COF systems by condensation of a tritopical aldehyde (1,3,5 benzenetricarbaldehyde, where R = H; or 1,3,5-triformilfloroglucionol, where R = OH) and 1,6-diaminopyrene (DAP), showing two possible pore isomers. Reproduced with permission from ref. 20. Copyright 2018, American Chemical Society. (b) Molecular models of the energetically favored TAPB-DCPDA-TAPB fragments and high-resolution STM images of CW-COFTAPB-DCPDA and CCW-COFTAPB-DCPDA. Reproduced with permission from ref. 21b. Copyright 2020, American Chemical Society. (c) Schematic representation and the possible orientations of imine bonds in TAPPy-NDI COF. Reproduced with permission from ref. 22. Copyright 2021, Wiley-VCH. |
Utilizing enantiomeric monomers as building blocks or modifying COFs by chiral moieties is an effective route to chiral isomeric COFs.21 The precise control of imine band orientation was first achieved in on-surface synthesis by Wang's group via the steric hindrance of chiral monomers.21b When prochiral PDA monomers with phenyl substituents are used to couple with 1,3,5-tris(4-aminophenyl)benzene (TAPB), the precursors are randomly distributed in the obtained distorted achiral hexagonal frameworks and the orientations of CN linkages are variable. For comparison, the configuration of the imine bonds can be well controlled via prochiral DCPDA precursors with two bulky carbazole substituents, which is attributed to the large rotation angle of the substituent relative to the skeleton (Fig. 4b). Consequently, highly regular 2D homochiral CW-COFTAPB-DCPDA and CCW-COFTAPB-DCPDA were successfully prepared via an on-surface reaction on HOPG and could be distinctly observed via high-resolution scanning tunnelling microscopy (STM) images (Fig. 4b).
Since the accurate control of imine bond orientations has been achieved experimentally, Bredas and co-workers have systematically studied theoretically the effect of imine orientations in the TAPPy-NDI COF skeleton (Fig. 4c).22 Considering three possible conformations of the imine bond in imine–NDI–imine segments and four types of connections between the imine bond and TAPPy, twelve isomeric structures would be generated for the TAPPy-NDI COF. Two anti- and two syn-conformations (A1, A2 and S1, S2) were selected as representative isomers to examine the impact of imine orientations on their crystal structures, electronic band structures, electronic coupling, and effective masses. According to the calculations, the A2 isomer has the most energetically stable structure, with the largest band gap and much smaller effective mass than those of the other isomeric conformations, suggesting that the imine orientations have a remarkable effect on the stacking pattern of COF layers and thus on the charge-transport properties of COFs.
Subsequently, the photophysical properties and photocatalytic performance of some positional isomeric COFs have been investigated. Thomas et al. elucidated the effect of imine linkage on photocatalysis via comparing the H2 evolution performance of donor–acceptor DCNA COFs (D–CN–A) and DNCA (D–NC–A) COFs.23 After protonation by ascorbic acid (AC), all DCNA_AC COFs exhibit enhanced photocatalytic H2 evolution performance than the corresponding DNCA_AC COFs, which is ascribed to the broader absorption band and more efficient charge-transporting ability of DCNA_AC COFs. H2 evolution can be achieved at 27.9 mmol h−1 g−1 for the DNCA-1_AC COF with the strongest nitrogen-triazine donor–acceptor combination. A similar tendency is also observed in isomeric oligo(phenylenevinylene)-based imine COFs24 and benzothiadiazole-based imine COFs,25 which further confirms that the positional isomerism of the linkages does possess significant influence on COF properties and performances.
Recently, positional isomers have been extended to olefin-linked COFs by employing suitable isomeric linkers. Two isomeric olefin-linked COFs (v-2D-COF-NO1 and v-2D-COF-NO2) were dexterously synthesized from trans and cis configurations of benzobisoxazole via benzobisoxazole-mediated aldol polycondensation (Fig. 5).26 The two isomeric COFs possessed similar crystalline structures, morphology, stability, specific surface areas and pore sizes. Although their functional groups and elemental compositions are the same, the photophysical and electrochemical properties of these isomers are distinct. Specifically, v-2D-COF-NO1 with trans-benzobisoxazole exhibits a broader optical absorption capacity, narrower band gap, better photoelectrochemical performance and faster photocatalytic hydrogen evolution rate than v-2D-COF-NO2 with cis-benzobisoxazole, which presumably originate from the better in-plane conjugation and charge carrier migration of v-2D-COF-NO1 as revealed by DFT calculations.
Fig. 5 Synthesis of isomeric v-2D-COF-NO1 and v-2D-COF-NO2 via the aldol-type polymerization between benzene-1,3,5-tricarbaldehyde (BTCA) and 2,6-dimethylbenzo[1,2-b:4,5-b′]bisoxazole (t-MBO) or 2,6-dimethylbenzo[1,2-b:5,4-b′]bisoxazole (c-MBO). Reproduced with permission from ref. 26. Copyright 2022, American Chemical Society. |
The representative 3D COF-300 is known as a 5-fold interpenetrated diamond structure (dia-c5 topology) and is synthesized via the conventional co-condensation solvothermal method at 120 °C for 3 days.27 Interestingly, an aging process in which the precursor solution of COF-300 is stood at room temperature for 3 days and then maintained at 50 °C for 3 days before heating at 120 °C can be conducive to forming an interpenetration isomer with a 7-fold interpenetrated diamond topology (dia-c7, Fig. 7).28 Despite the essentially identical constitution and similar stability, the two COF-300 isomers are structurally different, which was unambiguously identified by PXRD and powder rotation electron diffraction (RED) analyses. More importantly, it was demonstrated that the aging process maintained below 60 °C enabled sufficient time for the controlled synthesis of the thermodynamically stable dia-c7 COF-300. However, this has been so far the only example of interpenetration isomerism, which probably arises from the fact that strongly oriented covalent linkages are unlikely to afford interpenetration diversity.
Fig. 7 Schematic presentation of two interpenetration isomers of COF-300. Reproduced with permission from ref. 28. Copyright 2018, American Chemical Society. |
For 2D COFs, the eclipsed AA stacking mode is generally an energetically stable structure; therefore, the staggered AB stacking structure is extremely scarce. The Dai group proposed a tandem conversion strategy to successfully produce highly crystalline CTF-1 with AA and AB stacking orders.29 The crystalline orange CTF-1 with the staggered AB stacking mode can be easily obtained under the catalysis of trifluoromethanesulfonic acid at 250 °C for 12 h, and the staggered structure is able to transform into greenish CTF-1 with an eclipsed AA stacking order through annealing at 350 °C under nitrogen. The acidity and loading amount of superacid exhibit tremendous influence on the quality of final AA stacked CTF-1 (Fig. 8). The driving force for transformation from the AB to AA stacking mode is that the AA stacking order is a more thermodynamically stable product and exhibits stronger interlayer interaction. The two isomeric CTF-1 frameworks exhibit the same chemical constitution but different light absorption capacities and distinct surface areas. The BET surface area of CTF-1-AA (646 m2 g−1) is much larger than that of CTF-1-AB (22 m2 g−1) which is probably caused by the staggered layer structure and the existence of CF3SO3H within the interlayers in CTF-1-AB. Moreover, the staggered CTF-1-AB has been demonstrated to show much better photochemical performance and saturated photocurrent density than isomeric CTF-1-AA in follow-up work.30
Fig. 8 Schematic diagram of the two-step synthetic pathway. Images in the blue and red dashed boxes are powders obtained in Step I and Step II, respectively. Reproduced with permission from ref. 29. Copyright 2020, American Chemical Society. |
The framework isomerism of 2D COFs was first identified in on-surface synthesis of a single-layered COF in 2017, which was constructed from representative D2h symmetric 1,3,6,8-tetrakis(p-formylphenyl)pyrene and C2 symmetric ditopic linear diamine.31 Rhombus, parallelogram, and Kagome networks were apparently observed on the graphite surface using a scanning tunneling microscope (STM, Fig. 9), while the conventional solvothermal method only afforded bulk quadrate networks.32 The presence of water, the reaction temperature and the molar ratios of monomers can impact the equilibrium control and the formation of well-ordered networks. Besides, two types of quadrate networks with high packing densities are predominant products at relatively high concentrations, while the Kagome networks with low packing densities prefer to form under dilute conditions, which is similar to the concentration effect on orienting supramolecular assemblies.33
Fig. 9 Overview of the three morphological single-layered COFs formed by polymerization of 1 and 2. Reproduced with permission from ref. 31. Copyright 2017, American Chemical Society. |
Subsequently, the Zhao group achieved the controllable synthesis of 2D framework isomeric COFs via regulated reaction solvents in 2020.34 Similarly, 4′,4′′′,4′′′′′,4′′′′′′′-(ethene-1,1,2,2-tetrayl)tetrakis([1,1′-biphenyl]-4-carbaldehyde) (ETTBC) with D2h symmetry and C2 symmetric 2,5-diaminotoluene (DAT) were selected as the building units to prepare isomeric COFs. After screening the solvent systems, a single-pore framework with the AA stacking mode (SP-COF-ED) was synthesized in a mixture of mesitylene/dioxane, whereas a dual-pore isomer (DP-COF-ED) was constructed in the system of n-butyl alcohol/o-dichlorobenzene. Interestingly, the directional transformation process can only be performed from DP-COF-ED to SP-COF-ED, suggesting that the SP-COF-ED might be the more thermodynamically stable product. The significant difference in isomeric structures was definitely revealed by the distinct PXRD patterns and N2 adsorption–desorption isotherms. In addition, DP-COF-ED displays better hydrolytic stability and more sensitive stimuli-responsiveness toward n-hexane vapor than the SP isomer, providing a good example to shed light on the structure–property relationship of isomeric COFs (Fig. 10a).
Fig. 10 (a) Controllable synthesis of SP-COF-ED and DP-COF-ED isomers and the transformation from one isomer to the other. Reproduced with permission from ref. 34. Copyright 2020, Chinese Chemical Society. (b) The illustration of isomeric COFs from isomeric bifunctional monomers. Reproduced with permission from ref. 37. Copyright 2021, Wiley-VCH. (c) Tuning of topology by adjusting the ratio of bulky organoboron as a Lewis acid and aniline as a Lewis base. Reproduced with permission from ref. 40. Copyright 2022, Springer Nature. |
However, the rigorous synthetic system for conventional co-condensation COFs is one of the key issues which will hinder further investigation of the fascinating isomerism of COFs. The crystallinity of the COFs is affected when the synthetic solvent is varied.35 To solve this conundrum, a “two-in-one” synthetic strategy was proposed and utilized to synthesize COFs in various kinds of solvents by Chen et al.,36 which provides a new possibility for exploring the isomerism of COFs. Primarily, three A2B2 isomeric monomers (p-TetPB, m-TetPB, and o-TetPB) were elaborately designed and synthesized to prepare five kinds of isomeric COFs.37 Among the three monomers, p-TetPB and m-TetPB are able to assemble into hexagonal kgm nets in aprotic solvents such as THF, and into monoclinic sql frameworks in protic alcohols. However, o-TetPB can only afford the square architecture in either protic or aprotic solvents due to the own configuration mismatch. These isomeric COFs also showcase the same constitutions but different crystalline structures and N2 adsorption capacities. Furthermore, the prominent distinction in the regular structures can be confirmed by the clear hexagonal honeycomb structure and uniform rhombic pores visualized in their corresponding HRTEM images (Fig. 10b). The difference in pore characteristic enables these isomeric COFs to selectively adsorb vitamin B12 guest molecules. Also, two biphenyl-based bifunctional monomers with or without protective groups for aldehydes have been indicated to be capable of fabricating isomeric COFs with the kgm and sql topologies via readily regulating the synthetic solvents and the concentration of precursors.38 The mentioned concept of “from isomeric monomers to isomeric frameworks” has been extended to the synthesis of isomeric COFs with triangular pores.39 The above examples demonstrate that the “two-in-one” strategy might be a proven and effective method for the construction of 2D constitutional isomeric COFs.
Apart from synthetic solvents, catalysts would be another crucial element for the formation of periodically ordered structures of COFs. Very recently, tris(pentafluorophenyl)borane (TPFB) was applied as a Lewis acid catalyst to realize the topological structure tunability of 4PE-1P-COF40 which has been known as the typical kgm topology COF since 2014.14 The size of TPFB is larger than the triangular pores in the kgm topology but smaller than the quadrangular pores in the sql framework, so COF-820 with the sql topology was isolated through the steric effect of bulky organoboron. The topology can be well modulated from pure phase sql COF-820 to the mixed phase and then to pure phase kgm 4PE-1P-COF by adding an additional amount of aniline to quench the acidic sites in TPFB (Fig. 10c), offering a new option for targeted synthesis of isomeric COFs.
First of all, positional isomeric COFs, particularly the common species that exhibit different positional linkages (e.g., CN and NC) but the same topological structures, have not received enough attention, even though some results have indicated that the slight differences in structures can generate remarkable photophysical properties.23–26 Amplification of the structural and feature differences in a rational way may be one of the key factors in promoting further development of positional isomers. A possible and effective protocol could be to incorporate guest molecules to introduce discriminative interactions between guests and isomeric frameworks, so these isomers can present markedly different properties. The phenomenon of “big distinction originated from little difference” would attract more interest and encourage further exploration of positional isomeric COFs. Meanwhile, the orientation of linkages has been demonstrated to be a significant factor in layer stacking,41 but achieving accurate control of the spatial direction of linkages remains a challenging goal. Intensive studies of the growth mechanism of COFs and exploration of key factors affecting the orientations of covalent bonds will be of practical guiding importance for this target.
Second, the episodic nature of topologic isomers severely impedes the development of isomeric COFs. Although the geometry of precursors is theoretically satisfied to form isomeric frameworks, the restricted synthesis conditions of co-polymerization COFs constrain the isolation of isomers. It has been indicated that the solvent system, precursor concentration, temperature and catalyst all affect the isomerism, and therefore precise regulation of synthetic conditions is a reasonable path to accelerate the targeted preparation of isomeric COFs. However, it is difficult to realize in practice due to the complicated effects of those issues on the polymerization rate, nucleation, and crystallization. There is also an urgent need to pullulate novel synthetic strategies for selectively and readily producing the desired kinetically or thermodynamically favoured isomers. Besides, the utilization of specific structures and the investigation of structure–property relationships for framework isomeric COFs are far from being sufficient. Currently, the utilization of framework isomeric COFs mainly depends on the distinct pore sizes, such as selective adsorption34,37 and delayed drug release.38 The underlying electronic, magnetic and optoelectronic properties of framework isomers are worth in-depth investigation due to the remarkable differences in the arrangement, stacking mode and interlayer interaction.
Last but not least, the expansion of isomeric building units is one of the pivotal elements in prolonging the species and scope of isomeric COFs. It has been demonstrated to be the effective path to construct isomeric chiral COFs,21 high-valency polycubane COFs42a and unprecedented topological 3D COFs42bvia utilizing suitable isomeric monomers or steric control modified molecules as building blocks. Therefore, isomeric monomers with different characteristics and diversiform symmetries are favourable for constructing novel isomeric COFs. For instance, C2v symmetric monomers with one elongated branch can theoretically produce 2D COFs with two different kinds of hexagonal honeycomb pores when combined with C2 symmetric linear linkers,43a and COFs possessing uniform irregular hexagonal pores or a dual-pore structure composed of regular and irregular hexagonal pores are afforded when co-polymerized with D3h symmetric linkers;43b K-shaped metallosalphen-based “two-in-one” monomers are able to form three kinds of networks with triangular, quadrangular and octagonal pores, triangular and irregular hexagonal pores, triangular pores with different sizes and irregular hexagonal pores, respectively.43c Moreover, it is possible to construct topological isomeric COFs from positional isomeric monomers via rational design, such as the representative 9,9′-spirobi[fluorene]-3,3′,6,6′-tetracarbaldehyde and 9,9′-spirobi[fluorene]-2,2′,7,7′-tetracarbaldehyde.44 Exploitation of these novel building units provides a foundation for the preparation of novel isomeric COFs.
In summary, isomeric COFs have been initially studied in the last five years, and the construction of isomeric COFs has been realized from accidental to directed synthesis. The unique features and applications of isomeric COFs have also been explored. These fascinating achievements will attract more attention towards the intriguing and meaningful isomerism in COF fields and accelerate the development of isomeric COFs. We believe that with the development of novel precursors and further investigation of structure–property relationships, isomeric COFs will be more abundant and can function as possible platforms for many applications.
This journal is © The Royal Society of Chemistry 2023 |