Issue 21, 2022

Thiol–ene ionogels based on polymerizable imidazolium ionic liquids

Abstract

In this work, we report the synthesis of polymerizable ionic liquids (PILs) and the synthesis of ionogels by thiol–ene photopolymerization. A series of gemini imidazolium-based bis(trifluoromethylsulfonyl)imide polymerizable ionic liquids with ene functional groups, reactive in thiol–ene polymerization, were synthesized. The obtained polymerizable ionic liquids differ by (i) type of reactive group: vinyl, allyl, (ii) length of hydrocarbon chain spacer (from C2 to C12) between two imidazole rings in cations in the vinyl series of PILs (divinyl-PIL), and (iii) type of substituent (–H or –CH3) at C(2) position at the imidazole ring in diallyl-PILs. Then ionogel systems on the basis of the prepared PILs used as ene, 1,3,5-trimethylolpropane trimethacrylate (TMPTM), difunctional aliphatic polyester urethane acrylate (DAPU), and tris(3-mercaptobutyloxethyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TMTT) were synthesized in 70 wt% of ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMImNTf2). The mechanical properties (tensile strength), ionic conductivity (electrochemical impedance spectroscopy), and thermal properties (differential scanning calorimetry, thermogravimetric analysis) of the prepared ionogels as well as the course of photopolymerization by the photo-DSC method were studied. The resulting ionogels are fully transparent, highly flexible, with no leakage (also at an elevated temperature 80 °C and during mechanical testing), all thanks to the presence of PILs in the polymer matrix of ionogels. Interestingly, DSC studies have shown that the ionic liquid EMImNTf2 does not crystallize in the synthesized ionogels in a broad range of temperatures (−170 °C to 30 °C). The PIL structure influences the polymerization kinetics as well as properties of ionogels. All synthesized ionogels are stable in the temperature range 304 °C–325 °C, and ionogels with allyl-PILs have higher thermal stability than ionogels with vinyl-PILs. The strength (for the ionogels with PILs C2–C6) and Young's modulus of the obtained ionogels increase with the length of the hydrocarbon chain of the spacer in vinyl-PILs but elongation and ionic conductivity decrease. However, the conductivity of ionogels is greater than 1 mS cm−1, which allows the use of the obtained materials, e.g., in electrochemical capacitors.

Graphical abstract: Thiol–ene ionogels based on polymerizable imidazolium ionic liquids

Article information

Article type
Paper
Submitted
27 جمادى الأولى 1443
Accepted
28 رمضان 1443
First published
04 شوال 1443

Polym. Chem., 2022,13, 3154-3170

Thiol–ene ionogels based on polymerizable imidazolium ionic liquids

A. Lewandowska, P. Gajewski, K. Szcześniak, Z. Fojud, M. Robakowska, A. Skrzypczak, A. Voelkel and A. Marcinkowska, Polym. Chem., 2022, 13, 3154 DOI: 10.1039/D1PY01726H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements