Issue 32, 2021

Interfacial design of thick sulfur cathodes to achieve high energy density and stability

Abstract

The lithium–sulfur battery (LSB) attracts significant attention to meet the ever-growing energy demand for future technology because of the high theoretical specific capacity of sulfur. To achieve the goal of 500 W h kg−1, the fabrication of thick sulfur cathodes is critical. The ensuing interfacial issues between different components will become more severe because of the intrinsic drawbacks of LSBs, including the low conductivity of sulfur, volumetric variation during cycling, and the solubility of polysulfides. This review summarizes the recent development of thick sulfur cathodes from the perspective of interfacial design. First, the selection of conductive agents with high specific areas and incorporation of catalysts can provide enough electrical conduction for the electrochemical conversions at the interface of sulfur and conductive agents. Then it is essential to control the porosity and tortuosity of the cathode to increase its contact area with the electrolyte for sufficient Li ions transport. A protective layer can be introduced to avoid the side effects of dissolved polysulfides. To maintain the integrity of the cathode, the mechanical properties of the binders and their adhesion to the current collectors should be improved. Overall, interfacial design is important to achieve stable sulfur cathodes.

Graphical abstract: Interfacial design of thick sulfur cathodes to achieve high energy density and stability

Article information

Article type
Review Article
Submitted
01 شوال 1442
Accepted
18 ذو الحجة 1442
First published
23 ذو الحجة 1442

J. Mater. Chem. A, 2021,9, 17129-17142

Interfacial design of thick sulfur cathodes to achieve high energy density and stability

Y. Luo, Y. Gao, Q. Guo and Z. Zheng, J. Mater. Chem. A, 2021, 9, 17129 DOI: 10.1039/D1TA04059F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements