Issue 16, 2020

A single-liquid miniature biofuel cell with boosting power density via gas diffusion bioelectrodes

Abstract

The low solubility of gas molecules in aqueous solutions has limited the power density output of enzymatic biofuel cells. Herein, a single-liquid miniature glucose–O2 fuel cell was constructed by using gas diffusion electrodes, which were prepared by immobilizing glucose oxidase (GOx) or laccase (Lac) modified on a porous structured carbon paper (CP). Due to the fast and direct O2 diffusion from air to the active sites of the immobilized enzyme through the pores of the CP anode/cathode with controlled wettability, the maximum power output densities dramatically increased to 9.64 μW cm−2 at 0.43 V and 53.0 μW cm−2 at 0.45 V for the cell in 5 mM glucose and after exposing the cell to air or O2 atmosphere, respectively. Interestingly, the resulting single-liquid cell could harvest power from human serum operating at a maximum power density of 49.0 μW cm−2 at 0.2 V. The biofuel cell fabricated by the gas diffusion electrodes displayed advantages such as high output power density, low cost and high ‘on-chip’ integrability and miniaturization, which suggest its great potential for implantable self-powered sensors and for many future applications.

Graphical abstract: A single-liquid miniature biofuel cell with boosting power density via gas diffusion bioelectrodes

  • This article is part of the themed collection: Biosensors

Supplementary files

Article information

Article type
Paper
Submitted
27 محرم 1441
Accepted
02 ربيع الثاني 1441
First published
03 ربيع الثاني 1441

J. Mater. Chem. B, 2020,8, 3550-3556

A single-liquid miniature biofuel cell with boosting power density via gas diffusion bioelectrodes

J. Wan, L. Mi, Z. Tian, Q. Li and S. Liu, J. Mater. Chem. B, 2020, 8, 3550 DOI: 10.1039/C9TB02100K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements