Issue 7, 2020

Number and intrinsic activity of cobalt surface sites in platinum promoted zeolite catalysts for carbon monoxide hydrogenation

Abstract

Supported cobalt catalysts are the catalysts of choice for synthesis of paraffinic hydrocarbons from carbon monoxide and hydrogen. In this paper, the number and intrinsic activity of cobalt nanoparticles promoted with Pt localized in zeolites with different structures and pore diameters (ZSM-5, MOR and BEA) have been investigated by steady state isotopic kinetic analysis (SSITKA) under conditions favouring higher methane selectivity. Promotion with Pt resulted in a higher number and higher reactivity of surface intermediates leading to methane. The cobalt catalyst supported by MOR zeolite displayed the highest SSITKA reaction rate in carbon monoxide hydrogenation, followed by Co supported on BEA and then Co supported on the zeolite ZSM-5. Good dispersion of cobalt nanoparticles inside and outside the surface of the MOR and BEA zeolites led to a higher number of active sites. On the other hand, poor dispersion of cobalt nanoparticles on the external surface of ZSM-5 resulted in the lowest intrinsic catalytic activity and lowest number of active sites. The intrinsic activity of cobalt sites was, however, almost unaffected by the inclusion of cobalt nanoparticles in the zeolite pores.

Graphical abstract: Number and intrinsic activity of cobalt surface sites in platinum promoted zeolite catalysts for carbon monoxide hydrogenation

Supplementary files

Article information

Article type
Paper
Submitted
02 ربيع الثاني 1441
Accepted
05 رجب 1441
First published
07 رجب 1441

Catal. Sci. Technol., 2020,10, 2137-2144

Number and intrinsic activity of cobalt surface sites in platinum promoted zeolite catalysts for carbon monoxide hydrogenation

A. Carvalho, V. V. Ordomsky, N. R. Marcilio and A. Y. Khodakov, Catal. Sci. Technol., 2020, 10, 2137 DOI: 10.1039/C9CY02421B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements