Issue 27, 2016

Enhanced photovoltaic performance and stability of carbon counter electrode based perovskite solar cells encapsulated by PDMS

Abstract

We report the encapsulation of low temperature carbon counter electrode based hole-conductor-free mesoscopic methylammonium lead iodide perovskite/TiO2 heterojunction solar cells with polydimethylsiloxane. The solar cells demonstrate improved photovoltaic performance, where we obtain an optimal short-circuit photocurrent JSC = 23.5 mA cm−2, open-circuit photovoltage VOC = 0.97 V, and fill factor FF = 0.474, corresponding to a light to electric power conversion efficiency of 10.8% under a standard AM 1.5 solar light of 100 mW cm−2 intensity. The results exhibit a remarkable 54% enhancement over those without encapsulation. The cross-sectional SEM images indicate that the PDMS layer can condense the carbon electrode by filling the gaps in the mesoscopic carbon film during the solidification of PDMS, resulting in an improved MAPbI3/carbon interface condition. The photoluminescence and electrical impedance spectroscopy measurements prove that the improved efficiency is ascribed to a more efficient charge transfer process and slower charge recombination between interfaces. In addition, the robust polydimethylsiloxane isolates water in air, avoiding the degradation of the CH3NH3PbI3 perovskite and leading to an impressive stability during a testing period of 3000 h. Our work paves the way for realizing low cost, highly efficient and stable hybrid photovoltaic cells.

Graphical abstract: Enhanced photovoltaic performance and stability of carbon counter electrode based perovskite solar cells encapsulated by PDMS

Supplementary files

Article information

Article type
Paper
Submitted
29 جمادى الثانية 1437
Accepted
06 رمضان 1437
First published
09 رمضان 1437

J. Mater. Chem. A, 2016,4, 10700-10709

Enhanced photovoltaic performance and stability of carbon counter electrode based perovskite solar cells encapsulated by PDMS

Z. Liu, B. Sun, T. Shi, Z. Tang and G. Liao, J. Mater. Chem. A, 2016, 4, 10700 DOI: 10.1039/C6TA02851A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements