Issue 7, 2022

Microwave-promoted continuous flow synthesis of thermoplastic polyurethane–silver nanocomposites and their antimicrobial performance

Abstract

Thermoplastic polyurethane–silver nanocomposites (PU–Ag NCs) have considerable potential in many medical applications due to their superior mechanical and antimicrobial properties. Herein, a microwave-promoted flow system is successfully employed for continuous in situ manufacturing of PU NCs having spherical silver nanoparticles (AgNPs) without any reducing agent at ∼40 °C in approximately 4 minutes. The main experimental parameters, including microwave power, metal salt concentration, polymer concentration, and flow rate, are optimised for the reproducible synthesis of AgNPs (∼5 nm) in the PU matrix, characterised by HRTEM-EDS and DLS analysis. XRD patterns indicate an increase in PU crystallinity with decreased particle size. Conventional heating flow synthesis at ∼50 °C or microwave-batch synthesis (MWB) at ∼44 and ∼50 °C is ineffective in preparing AgNPs, and only large AgNPs (>100 nm) are synthesised at 70 °C in the MWB reactor. PU–Ag NC films bearing small AgNPs (∼5 nm) exhibit superior antibacterial activity (>97%) against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus compared to large NPs (∼218 nm). The proposed method may manufacture other metal–polymer matrix composites.

Graphical abstract: Microwave-promoted continuous flow synthesis of thermoplastic polyurethane–silver nanocomposites and their antimicrobial performance

Supplementary files

Article information

Article type
Paper
Submitted
11 ፌብሩ 2022
Accepted
16 ኤፕሪ 2022
First published
19 ሜይ 2022

React. Chem. Eng., 2022,7, 1510-1524

Microwave-promoted continuous flow synthesis of thermoplastic polyurethane–silver nanocomposites and their antimicrobial performance

Q. Saleem, M. Torabfam, H. Kurt, M. Yüce and M. K. Bayazit, React. Chem. Eng., 2022, 7, 1510 DOI: 10.1039/D2RE00049K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements