Issue 11, 2021

Bioinspired photocatalytic hedgehog coating for super liquid repellency

Abstract

Super liquid repellency towards highly wetting liquids is of great interest for fundamental research and practical applications. Superomniphobic coatings have been made by forming re-entrant or doubly re-entrant morphologies that result in contact angles above 150° and contact angle hysteresis below 10°. While existing superomniphobic coatings rely on stringed nanoparticles to make re-entrant geometries, we show that a new type of superomniphobic surface is made by microscale hedgehog particles that combine the features of springtail inspired re-entrant microspheres with cicada wing inspired nanoneedles. Such a bioinspired hedgehog coating shows super liquid repellency from water to low surface tension liquids like dodecane with a surface tension of 25.3 mN m−1. The hedgehog particles provide re-entrant structures and the nanoneedles minimize the local liquid–solid adhesion due to the presence of air gaps. Moreover, we use a one-step approach to make scalable titanium dioxide hedgehog coatings with photocatalytic properties. Thus, the photocatalytic hedgehog coating can be easily converted to slippery liquid-infused porous surfaces under ultraviolet illumination in one-step. Such a photocatalytically activated slippery surface shows an ultralow contact angle hysteresis (≤1°) to highly wetting fluids with surface tensions as low as 16 mN m−1.

Graphical abstract: Bioinspired photocatalytic hedgehog coating for super liquid repellency

Supplementary files

Article information

Article type
Research Article
Submitted
26 ፌብሩ 2021
Accepted
11 ኤፕሪ 2021
First published
12 ኤፕሪ 2021

Mater. Chem. Front., 2021,5, 4174-4181

Author version available

Bioinspired photocatalytic hedgehog coating for super liquid repellency

J. Sarma, Z. Guo and X. Dai, Mater. Chem. Front., 2021, 5, 4174 DOI: 10.1039/D1QM00325A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements