Issue 23, 2020

A water-based process for the surface functionalisation of ceramic fibres

Abstract

This research work applied the hydrothermal process for the surface treatment of ceramic fibres which are integrated into ceramic matrix composites (CMCs). In the conventional process, the main step consists of dissolving the oxidised phases at the fibre surface using strong acids. As a consequence, the chemical homogeneity of the surface is improved and a microporous carbon (C) film is generated at the fibre surface. The C-rich surface enhances the compatibility of the fibre with the pyrocarbon interphase that is deposited on the fibres prior to matrix deposition when processing CMCs. This paper shows the possibility of substituting this conventional process using strong acids by hydrothermal treatment. Indeed, as water displays tunable physico-chemical properties as a function of temperature and pressure, it is possible to recover fibres demonstrating similar surface characteristics to the ones obtained after the reference acid-based treatment. The efficiency of the hydrothermal treatment is assessed through optimised surface properties obtained after one single-step process operating in a semi-continuous mode. Then, a mechanism investigation reveals a selective attack of the Si atoms contained in the fibre via a hydrolysis reaction. Besides, it is denoted that the process follows zero order kinetics. This allows fine control of the fiber surface properties to obtain CMCs with high thermomechanical performance.

Graphical abstract: A water-based process for the surface functionalisation of ceramic fibres

Article information

Article type
Paper
Submitted
02 ሴፕቴ 2020
Accepted
14 ኦክቶ 2020
First published
14 ኦክቶ 2020

Green Chem., 2020,22, 8308-8315

A water-based process for the surface functionalisation of ceramic fibres

L. Henry, N. Biscay, C. Huguet, S. Loison and C. Aymonier, Green Chem., 2020, 22, 8308 DOI: 10.1039/D0GC02987D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements