Issue 11, 2019

Interface structure regulation of a Ag lithiophilic layer towards uniform lithium nucleation/growth

Abstract

Undesirable lithium dendrite growth directly hinders the development of next-generation high-energy-density lithium metal batteries. Easy and effective realization of uniform lithium nucleation and deposition on copper foils to relieve this problem in a lithium metal anode is a grand challenge. In this study, we have developed a very simple and highly efficient surface engineering strategy, in which a uniform Ag lithiophilic layer directly grows on a common Cu foil based on the spontaneous replacement reaction between Cu atom and Ag+ in just 3 min. The evolution of the morphology of the Ag layer could be effectively regulated by controlling the reaction concentration and time. Moreover, the given lithium plating behaviour in the lithiophilic layer was devoted to smooth lithium deposition and stripping with no dendritic growth. As a result, a high coulombic efficiency of approximately 98% was observed over 400 cycles at a current density of 1 mA cm−2. More significantly, a simple and highly efficient modified strategy on the common Cu foil could greatly boost the stabilization of the Li metal-based anode.

Graphical abstract: Interface structure regulation of a Ag lithiophilic layer towards uniform lithium nucleation/growth

Supplementary files

Article information

Article type
Communication
Submitted
25 ጁላይ 2019
Accepted
10 ሴፕቴ 2019
First published
10 ሴፕቴ 2019

Sustainable Energy Fuels, 2019,3, 2995-2999

Interface structure regulation of a Ag lithiophilic layer towards uniform lithium nucleation/growth

Y. Liu, S. Huang‡, B. Wang, Y. Yang, G. Cao, Y. Xiong and H. Zhang, Sustainable Energy Fuels, 2019, 3, 2995 DOI: 10.1039/C9SE00561G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements