Issue 20, 2015

Sprayable, paintable layer-by-layer polyaniline nanofiber/graphene electrodes

Abstract

Using polyaniline nanofibers and graphene oxide sheets, we demonstrate here the successful layer-by-layer (LbL) assembly of the two anisotropic nanomaterials using a water-based spray-on approach. The processing parameters most critical to the production of uniform electrodes are blow-drying time and removal of the rinsing step. The resulting polyaniline nanofiber/graphene oxide films are electrochemically reduced to convert graphene oxide to reduced graphene oxide, as evidenced by a distinctive change in colour and Raman spectra. The architecture of the electrode is highly porous (74% void), which facilitates ion transport. The electrodes' ability to store charge is evaluated as a function of thickness in non-aqueous conditions (LiClO4 in propylene carbonate, lithium metal anode). The capacity reaches values as high as 114 mA h g−1 (45 mA h cm−3) at 0.03 A g−1. Besides capacity, other performance metrics (energy and power) are compared against control electrodes made by a different processing approach, dip-assisted LbL assembly. It is found that spray-assisted LbL assembly is over 70 times faster and yields electrodes with better rate capability relative to dip-assisted LbL assembly.

Graphical abstract: Sprayable, paintable layer-by-layer polyaniline nanofiber/graphene electrodes

Supplementary files

Article information

Article type
Paper
Submitted
22 ዲሴም 2014
Accepted
22 ጃንዩ 2015
First published
22 ጃንዩ 2015

RSC Adv., 2015,5, 14994-15001

Author version available

Sprayable, paintable layer-by-layer polyaniline nanofiber/graphene electrodes

S. R. Kwon, J. Jeon and J. L. Lutkenhaus, RSC Adv., 2015, 5, 14994 DOI: 10.1039/C4RA16822D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements