Issue 5, 2015

Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency

Abstract

Hysteresis-less inverted ITO/PEDOT:PSS/CH3NH3PbI3 (MAPbI3)/PCBM/Au planar hybrid solar cells with 18.1% average power conversion efficiency irrespective of the scan rate were fabricated by depositing dense pinhole-free MAPbI3 perovskite on a PEDOT:PSS/ITO substrate via a single-step spin-coating of solubility controlled MAPbI3 solution. The conductivities of PEDOT:PSS, PCBM, poly(triaryl amine) (PTAA):tert-butylpyrridne (tBP) + Li-bis(trifluoromethanesulfonyl)imide (Li–TFSI), MAPbI3, and TiO2 were 0.014, 0.016, 0.034, 0.015, and 0.00006 mS cm−1, respectively. The average PL lifetimes (τav) of the inverted and normal cell were 1.277 and 1.94 ns, respectively. The diffusion coefficient (Dn) and charge carrier lifetime (τn) for the inverted MAPbI3 planar hybrid solar cells were increased by 1.14-fold and 1.1-fold, respectively, compared with the conventional FTO/TiO2/MAPbI3/PTAA:tBP + Li–TFSI/Au planar hybrid cells. Hence, the inverted MAPbI3 planar hybrid solar cells exhibited better power conversion efficiency and stability than the conventional MAPbI3 cells because (i) the electron extraction from MAPbI3 to the electron conductor was improved because the electron conductivity of PCBM is higher than that of TiO2; (ii) the EQE value was increased by the better charge injection/separation efficiency between MAPbI3 and PCBM, and by the higher charge collection efficiency than the conventional cell; (iii) the fill factor is improved by the increased Dn and τn; and (iv) the air and humidity stability is improved by the absence of corrosive additives in the device architecture and the hydrophobicity of the PCBM top layer. The reduced current density–voltage (JV) hysteresis with respect to the scan rate and scan direction in the inverted planar hybrid solar cells could be attributed to a more balanced electron flux (Je) and hole flux (Jh), and a reduced number of surface traps.

Graphical abstract: Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency

Supplementary files

Article information

Article type
Paper
Submitted
13 ጃንዩ 2015
Accepted
01 ኤፕሪ 2015
First published
01 ኤፕሪ 2015

Energy Environ. Sci., 2015,8, 1602-1608

Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency

J. H. Heo, H. J. Han, D. Kim, T. K. Ahn and S. H. Im, Energy Environ. Sci., 2015, 8, 1602 DOI: 10.1039/C5EE00120J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements