Issue 3, 2015

Highly efficient and bending durable perovskite solar cells: toward a wearable power source

Abstract

Perovskite solar cells are promising candidates for realizing an efficient, flexible, and lightweight energy supply system for wearable electronic devices. For flexible perovskite solar cells, achieving high power conversion efficiency (PCE) while using a low-temperature technology for the fabrication of a compact charge collection layer is a critical issue. Herein, we report on a flexible perovskite solar cell exhibiting 12.2% PCE as a result of the employment of an annealing-free, 20 nm thick, amorphous, compact TiOx layer deposited by atomic layer deposition. The excellent performance of the cell was attributed to fast electron transport, verified by time-resolved photoluminescence and impedance studies. The PCE remained the same down to 0.4 sun illumination, as well as to a 45° tilt to incident light. Mechanical bending of the devices worsened device performance by only 7% when a bending radius of 1 mm was used. The devices maintained 95% of the initial PCE after 1000 bending cycles for a bending radius of 10 mm. Degradation of the device performance by the bending was the result of crack formation from the transparent conducting oxide layer, demonstrating the potential of the low-temperature-processed TiOx layer to achieve more efficient and bendable perovskite solar cells, which becomes closer to a practical wearable power source.

Graphical abstract: Highly efficient and bending durable perovskite solar cells: toward a wearable power source

Supplementary files

Article information

Article type
Paper
Submitted
01 ኦገስ 2014
Accepted
03 ኦክቶ 2014
First published
03 ኦክቶ 2014

Energy Environ. Sci., 2015,8, 916-921

Highly efficient and bending durable perovskite solar cells: toward a wearable power source

B. J. Kim, D. H. Kim, Y. Lee, H. Shin, G. S. Han, J. S. Hong, K. Mahmood, T. K. Ahn, Y. Joo, K. S. Hong, N. Park, S. Lee and H. S. Jung, Energy Environ. Sci., 2015, 8, 916 DOI: 10.1039/C4EE02441A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements