Issue 17, 2023

Controlling amorphous silicon in scratching for fabricating high-performance micromixers

Abstract

As core parts of microfluidic chip analysis systems, micromixers show robust applications in wide fields. However, restricted by the fabrication technology, it remains challenging to achieve high-quality micromixers with both delicately designed structure and efficient mixing. In this study, based on the theory of chaotic mixing, sinusoidal structures with variable phases were designed and then fabricated through scanning probe lithography (SPL) and post-selective etching. It was found that scratches with phase differences can lead to the periodic formation of amorphous silicon (a-Si), which can resist etching. Consequentially, misaligned sine channels with thick–thin alternating 3D shapes can be generated in situ from the scratched traces after the etching. Further analysis showed that a thicker a-Si layer can be obtained by reducing the line spacing in the scratching, confirmed by Raman detections and simulations. With the proposed method, the misaligned sine micromixer was achieved with higher mixing efficiency than ever. The duplicating process was also investigated for high-precision production of micromixers. The study provided strategies for the miniaturization of high-performance microfluidic chips.

Graphical abstract: Controlling amorphous silicon in scratching for fabricating high-performance micromixers

Supplementary files

Article information

Article type
Paper
Submitted
12 ኤፕሪ 2023
Accepted
19 ጁላይ 2023
First published
20 ጁላይ 2023

Lab Chip, 2023,23, 3794-3801

Controlling amorphous silicon in scratching for fabricating high-performance micromixers

T. Chen, L. Cui, W. He, R. Liu, C. Feng, L. Wu, Y. Wang, H. Liu, L. Qian and B. Yu, Lab Chip, 2023, 23, 3794 DOI: 10.1039/D3LC00320E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements