Issue 40, 2022

Capture and detection of Escherichia coli with graphene aerogels

Abstract

Some pathogenic bacteria may cause serious food poisoning as well as catastrophic infections. Thus, it is critical to identify bacteria using simple, quick, and sensitive methods. Herein, we fabricate a graphene aerogel-based biosensing system to capture and detect Escherichia coli (E. coli) with high specificity and sensitivity. A graphene aerogel is prepared by a one-step hydrothermal synthesis method without any reducing reagent. With the help of E. coli antibodies and the graphene foam with a porous structure, E. coli can be captured using the detection substrate with high specificity and selectivity. The electrical resistance and electrochemical impedance spectroscopy (EIS) results of the graphene aerogel foam changed with high sensitivity during E. coli adhesion. Moreover, the resistance change of the graphene device can still be observed when the E. coli concentration was as low as 10 cfu mL−1, while there is no obvious resistance change in the use of Staphylococcus aureus. The subsequent EIS test also found that the charge transfer resistance (Rct) of the detection substrate gradually increased during the E. coli capture process. This nanoelectronic biosensor is simple, quick, safe, and very sensitive, and it may be used as a high-throughput platform for pathogenic bacterial detection, bacterial research, and antimicrobial drug screening.

Graphical abstract: Capture and detection of Escherichia coli with graphene aerogels

Supplementary files

Article information

Article type
Paper
Submitted
17 ኦገስ 2022
Accepted
14 ሴፕቴ 2022
First published
15 ሴፕቴ 2022

J. Mater. Chem. B, 2022,10, 8211-8217

Capture and detection of Escherichia coli with graphene aerogels

C. Shi, Y. Tang, H. Yang, J. Yang, Y. Wu, H. Sun, S. Yin and G. Wang, J. Mater. Chem. B, 2022, 10, 8211 DOI: 10.1039/D2TB01749K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements