Issue 46, 2022

In situ interfacial passivation with an arylphosphine oxide and phosphonate electron transporting layer for efficient all-solution-processed PeQLEDs

Abstract

Perovskite quantum dot light-emitting diodes (PeQLEDs) have emerged as a promising candidate for high-quality lightings and displays, where an electron transporting layer (ETL) is required to achieve balanced charge transport and thus high performance. However, the ETL is often thermally-deposited under vacuum, since the low-cost solution process would damage the underlying perovskite quantum dots (PeQDs). Here, we demonstrate efficient all-solution-processed PeQLEDs based on arylphosphine oxide (SPPO13) and phosphonate (TPPO) as the ETL. Benefitting from the coordination between P[double bond, length as m-dash]O and exposed Pb atoms, in situ interfacial passivation occurs during the solution deposition of SPPO13 or TPPO on PeQDs. As a result, bilayer films (PeQDs/ETL) exhibit improved photoluminescence quantum yields and prolonged lifetimes compared with single layer PeQDs. Correspondingly, all-solution-processed PeQLEDs are fabricated successfully via an orthogonal solvent strategy, revealing bright green emission with a promising current efficiency of 24.1 cd A−1 (12.1 lm W−1, 6.47%) and CIE coordinates of (0.12, 0.79).

Graphical abstract: In situ interfacial passivation with an arylphosphine oxide and phosphonate electron transporting layer for efficient all-solution-processed PeQLEDs

Supplementary files

Article information

Article type
Paper
Submitted
11 ጁላይ 2022
Accepted
23 ኦክቶ 2022
First published
24 ኦክቶ 2022

Nanoscale, 2022,14, 17230-17236

In situ interfacial passivation with an arylphosphine oxide and phosphonate electron transporting layer for efficient all-solution-processed PeQLEDs

X. Li, Y. Tian, L. Yang, S. Wang, L. Zhao and J. Ding, Nanoscale, 2022, 14, 17230 DOI: 10.1039/D2NR03793A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements