Issue 35, 2021

Improved stability and efficiency of perovskite/organic tandem solar cells with an all-inorganic perovskite layer

Abstract

All-inorganic perovskite solar cells (PVSCs) have attracted intensive attention owing to their tunable bandgaps and excellent photo- and thermostability, making them promising absorbers in tandem solar cells (TSCs). Herein, we develop an all-inorganic perovskite/organic TSC with a wide bandgap all-inorganic perovskite CsPbI2.1Br0.9 and a narrow bandgap organic photoactive layer (PM6:Y6) serving as top and bottom sub cells respectively. The fabricated tandem solar cell demonstrated a remarkable PCE of 18.06%, with an open-circuit voltage (VOC) of 1.89 V, short-circuit current (JSC) of 12.77 mA cm−2, and fill factor (FF) of 74.81%, which is higher than that of both single junction PVSCs (14.43%) and organic solar cells (14.01%). Moreover, benefiting from the outstanding UV and thermal stability of inorganic perovskites, all-inorganic perovskite-based tandem devices showed superior stability under light and heat, with negligible degradation after 150 h of UV irradiation, 250 h under one sun illumination and 100 h of heating at 80 °C. This work demonstrates that all-inorganic perovskites are an appropriate candidate for the fabrication of efficient and stable TSCs.

Graphical abstract: Improved stability and efficiency of perovskite/organic tandem solar cells with an all-inorganic perovskite layer

Supplementary files

Article information

Article type
Paper
Submitted
18 ዲሴም 2020
Accepted
18 ማርች 2021
First published
18 ማርች 2021

J. Mater. Chem. A, 2021,9, 19778-19787

Author version available

Improved stability and efficiency of perovskite/organic tandem solar cells with an all-inorganic perovskite layer

X. Wu, Y. Liu, F. Qi, F. Lin, H. Fu, K. Jiang, S. Wu, L. Bi, D. Wang, F. Xu, A. K.-Y. Jen and Z. Zhu, J. Mater. Chem. A, 2021, 9, 19778 DOI: 10.1039/D0TA12286F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements