Issue 22, 2021

Carving the shell thickness of tungsten trioxide hollow multi-shelled structures for enhanced photocatalytic performance

Abstract

As a special hierarchical architecture, the use of the hollow multi-shelled structure (HoMS) is a new approach to greatly enhance the photocatalytic activity of materials. Precise tailoring of the shell structure in HoMSs is challenging, and its effects on the optical and electrical properties remain obscure. Herein, as a potential high-performance water oxidation photocatalyst, tungsten trioxide (WO3) HoMSs with up to three shell numbers have been successfully fabricated. Furthermore, the accurate control of the shell thickness was realized in the range from 35 to 90 nm by optimizing the amount and distribution of tungsten ions adsorbed within carbonaceous microsphere templates. All as-synthesized WO3 HoMSs showed excellent activities in photocatalytic water oxidation superior to WO3 nanoparticles. Moreover, the effects of shell thickness on photocatalytic proceedings were thoroughly investigated. Although the thick-shelled (thick-3) WO3 HoMSs have a better light-harvesting performance, thin triple-shelled (thin-3) ones expressed higher photocatalytic activity owing to the increased charge-carrier separation/transfer efficiency and larger specific areas. Consequently, the remarkable photocatalytic water oxidation activity up to 907 μmol g−1 h−1 with an apparent quantum efficiency of 6.3% was achieved by thin-3 WO3 HoMSs, showing the highest values among reported WO3 photocatalysts. Moreover, the mechanism clarification for modulating the shell thickness and the effect of the shell thickness on performance will be a valuable reference for further designing and synthesizing new nanostructures for highly efficient solar energy conversion.

Graphical abstract: Carving the shell thickness of tungsten trioxide hollow multi-shelled structures for enhanced photocatalytic performance

Supplementary files

Article information

Article type
Research Article
Submitted
08 ኦገስ 2021
Accepted
08 ሴፕቴ 2021
First published
09 ሴፕቴ 2021

Mater. Chem. Front., 2021,5, 8010-8017

Carving the shell thickness of tungsten trioxide hollow multi-shelled structures for enhanced photocatalytic performance

X. Zhang, Y. He, Y. Wei and R. Yu, Mater. Chem. Front., 2021, 5, 8010 DOI: 10.1039/D1QM01124C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements