Issue 12, 2021

Research on metallic chalcogen-functionalized monolayer-puckered V2CX2 (X = S, Se, and Te) as promising Li-ion battery anode materials

Abstract

Two-dimensional MXene nanomaterials are promising anode materials for Li-ion batteries (LIBs) due to their excellent conductivity, large surface area, and high Li capability. The chalcogen-terminated monolayer-puckered V2CX2 (X = S, Se, and Te) structures are expected to embody remarkable properties for Li storage and diffusion in this paper. The metallic property enables the V2CX2 anodes to have a fast electron transport rate in the charge/discharge process. The phonon spectra prove their dynamical stabilities. The adsorption energy and energy diffusion barrier of the Li atom on the V2CX2 (X = S, Se, and Te) surface both decrease with increasing atomic number of the terminated element. The monolayer V2CSe2 shows higher Li capacity (394.41 mA h g−1), relatively low Ebarrier (0.21 eV) and a small volume expansion ratio (6.1%) when compared with those of V2CX2 (X = O, S, and Te) monolayers, indicating that they should be the most promising LIB anodes. These excellent properties indicate that monolayer chalcogen-terminated V2CX2 (X = S, Se, and Te) structures have promising applications as LIB anodes.

Graphical abstract: Research on metallic chalcogen-functionalized monolayer-puckered V2CX2 (X = S, Se, and Te) as promising Li-ion battery anode materials

Article information

Article type
Research Article
Submitted
17 ማርች 2021
Accepted
16 ኤፕሪ 2021
First published
30 ኤፕሪ 2021

Mater. Chem. Front., 2021,5, 4672-4681

Research on metallic chalcogen-functionalized monolayer-puckered V2CX2 (X = S, Se, and Te) as promising Li-ion battery anode materials

C. Tang, X. Wang and S. Zhang, Mater. Chem. Front., 2021, 5, 4672 DOI: 10.1039/D1QM00422K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements