Issue 21, 2019

Superconducting boron doped nanocrystalline diamond on boron nitride ceramics

Abstract

In this work we have demonstrated the growth of nanocrystalline diamond on boron nitride ceramic. We measured the zeta potential of the ceramics to select the diamond seeds. Diamond was then grown on the seeded ceramics using a microwave chemical vapour deposition system. A clear difference was found between the samples which were seeded with nanodiamond and the ones not seeded before growth. Raman spectroscopy confirmed the excellent quality of the diamond film. Dielectric measurements showed an increase in the dielectric constant of the material after diamond growth. The diamond was also doped with boron to make it superconducting. The film had a transition temperature close to 3.4 K. Similar strategies can be applied for the growth of diamond on other types of ceramics.

Graphical abstract: Superconducting boron doped nanocrystalline diamond on boron nitride ceramics

  • This article is part of the themed collection: Nanocarbons

Article information

Article type
Paper
Submitted
29 ማርች 2019
Accepted
28 ኤፕሪ 2019
First published
08 ሜይ 2019
This article is Open Access
Creative Commons BY license

Nanoscale, 2019,11, 10266-10272

Superconducting boron doped nanocrystalline diamond on boron nitride ceramics

S. Mandal, H. A. Bland, J. A. Cuenca, M. Snowball and O. A. Williams, Nanoscale, 2019, 11, 10266 DOI: 10.1039/C9NR02729G

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements