Issue 1, 2016

Optofluidic tunable lenses using laser-induced thermal gradient

Abstract

This paper reports a new design of optofluidic tunable lens using a laser-induced thermal gradient. It makes use of two straight chromium strips at the bottom of the microfluidic chamber to absorb the continuous pump laser to heat up the moving benzyl alcohol solution, creating a 2D refractive index gradient in the entrance part between the two hot strips. This design can be regarded as a cascade of a series of refractive lenses, and is distinctively different from the reported liquid lenses that mimic the refractive lens design and the 1D gradient index lens design. CFD simulation shows that a stable thermal lens can be built up within 200 ms. Experiments were conducted to demonstrate the continuous tuning of focal length from initially infinite to the minimum 1.3 mm, as well as the off-axis focusing by offsetting the pump laser spot. Data analyses show the empirical dependences of the focal length on the pump laser intensity and the flow velocity. Compared with previous studies, this tunable lens design enjoys many merits, such as fast tuning speed, aberration-free focusing, remote control, and enabling the use of homogeneous fluids for easy integration with other optofluidic systems.

Graphical abstract: Optofluidic tunable lenses using laser-induced thermal gradient

  • This article is part of the themed collection: Optofluidics

Supplementary files

Article information

Article type
Paper
Submitted
26 ሴፕቴ 2015
Accepted
06 ኖቬም 2015
First published
09 ኖቬም 2015

Lab Chip, 2016,16, 104-111

Optofluidic tunable lenses using laser-induced thermal gradient

Q. Chen, A. Jian, Z. Li and X. Zhang, Lab Chip, 2016, 16, 104 DOI: 10.1039/C5LC01163A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements