Issue 7, 2016

Development of a tip enhanced near-field laser ablation system for the sub-micrometric analysis of solid samples

Abstract

A near-field laser ablation system was developed for the analysis of inorganic solid samples in the nanometer resolution range. The instrument is based on the coupling of a nanosecond Nd:YAG laser with an atomic force microscope. The technique uses a tip enhancement effect obtained by the interaction of laser radiation with the conductive tip of the AFM maintained at a few nanometers above the sample surface. By applying this technique to conducting gold and semiconducting silicon samples, a lateral resolution of 100 nm was demonstrated. With a single laser pulse, craters of about 100 nm in diameter and a few nanometers in depth were obtained. A multi-parametric study was carried out in order to understand the effect of different experimental parameters (laser fluence, tip-to-sample distance, sample and tip nature) on the near-field laser ablation efficiency, crater dimensions and amount of ablated material. Numerical simulations of the localized heating with a home-made 3-D code presented a good explanation for the nanometer-sized crater diameters obtained in our experiments.

Graphical abstract: Development of a tip enhanced near-field laser ablation system for the sub-micrometric analysis of solid samples

Article information

Article type
Paper
Submitted
12 ፌብሩ 2016
Accepted
07 ጁን 2016
First published
07 ጁን 2016

J. Anal. At. Spectrom., 2016,31, 1534-1541

Development of a tip enhanced near-field laser ablation system for the sub-micrometric analysis of solid samples

C. Jabbour, J. Lacour, M. Tabarant, A. Semerok and F. Chartier, J. Anal. At. Spectrom., 2016, 31, 1534 DOI: 10.1039/C6JA00044D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements