Issue 4, 2016

Evaluation of existing control measures in reducing health and safety risks of engineered nanomaterials

Abstract

While the risk management of engineered nanomaterials (ENMs) receives significant attention, there is still a limited understanding of how to select optimal risk management measures (RMMs) for controlling and mitigating the risks associated with exposure to ENMs. Clearly, there exists a need to expand current risk management practices to ensure safe production, handling and use of ENMs. Moreover, the performance of the existing RMMs should be re-evaluated for ENMs since control options that are proven to be effective for preventing or limiting risks associated with traditional particles might give unsatisfactory results in the case of nano-scale particles. This paper has brought together the evidence on the adequacy of traditional controls to minimize potential health and environmental risks resulting from exposure to ENMs. The aim here is to advance our understanding of the risk management approaches relevant for ENMs, and ultimately to support the selection of the most suitable RMMs when handling ENMs. To that end, evaluative evidence collected from the review of relevant literature and survey of nanotechnology institutions are combined and summarised to understand the level of protection offered by each control measure, as well as the relative costs of their implementation. The findings suggest that most relevant risk control options are based on isolating people from hazard through engineering measures (e.g. ventilation and chemical fume hoods) or personal protective equipment (PPE), rather than eliminating hazard at source (e.g. substitution). Although control measures related to the modification of ENMs have high efficiency in the occupational risk control hierarchy, they are not widely employed since there is currently a high degree of uncertainty regarding the impact of manipulating nano-characteristics on the performance of final product. Lastly, despite its low cost, PPE is the least effective category in the occupational risk control hierarchy and should not be used on its own when significant risk reduction is required. Clearly, further quantitative data is needed to fully assess the feasibility and cost-effectiveness of risk control options to prevent risks from exposure to ENMs. When there is little information on the efficiency of control measures specific to ENMs, the default efficiencies can be used for initial assessment purposes although it should not be considered exhaustive.

Graphical abstract: Evaluation of existing control measures in reducing health and safety risks of engineered nanomaterials

Article information

Article type
Paper
Submitted
27 ኤፕሪ 2016
Accepted
20 ጁን 2016
First published
21 ጁን 2016

Environ. Sci.: Nano, 2016,3, 869-882

Evaluation of existing control measures in reducing health and safety risks of engineered nanomaterials

C. Oksel, V. Subramanian, E. Semenzin, C. Y. Ma, D. Hristozov, X. Z. Wang, N. Hunt, A. Costa, W. Fransman, A. Marcomini and T. Wilkins, Environ. Sci.: Nano, 2016, 3, 869 DOI: 10.1039/C6EN00122J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements