Issue 1, 2016

Direct-growth carbon nanotubes on 3D structural microelectrodes for electrophysiological recording

Abstract

A novel 3D carbon nanotube (CNT) microelectrode was developed through direct growth of CNTs on a gold pin-shaped 3D microelectrode at a low temperature (400 °C) for applications in neural and cardiac recording. With an electroplated Ni catalyst layer covering the entire surface of the pin-shaped structure, CNTs were synthesized on a 3D microelectrode by catalytic thermal chemical vapor deposition (CVD). According to the analyses by electrochemical impedance spectroscopy, the impedance of 3D microelectrodes after CNT growth and UV/O3 treatment decreased from 9.3 Ω mm−2 to 1.2 Ω mm−2 and the capacitance increased largely from 2.2 mF cm−2 to 73.3 mF cm−2. The existence of UVO3-treated CNT led to a large improvement of interfacial capacitance, contributing to the decrease of impedance. The electrophysiological detection capability of this 3D CNT microelectrode was demonstrated by the distinguished P waves, QRS complex and T waves in the electrocardiogram of the zebrafish heart and the action potential recorded from individual rat hippocampal neurons. The compatibility of integration with ICs, high resolution in space, electrophysiological signals, and non-invasive long-term recording suggest that the 3D CNT microelectrode exhibits promising potential for applications in electrophysiological research and clinical trials.

Graphical abstract: Direct-growth carbon nanotubes on 3D structural microelectrodes for electrophysiological recording

Supplementary files

Article information

Article type
Paper
Submitted
26 ኦገስ 2015
Accepted
06 ኖቬም 2015
First published
09 ኖቬም 2015

Analyst, 2016,141, 279-284

Direct-growth carbon nanotubes on 3D structural microelectrodes for electrophysiological recording

A. I. Pan, M. Lin, H. Chung, H. Chen, S. Yeh, Y. Chuang, Y. Chang and T. Yew, Analyst, 2016, 141, 279 DOI: 10.1039/C5AN01750E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements