Issue 26, 2015

Supercapacitor performance of carbon nanofiber electrodes derived from immiscible PAN/PMMA polymer blends

Abstract

Polymer blends yield carbon materials with superior performances for supercapacitor applications since blending can lead to controlled and fine pore architectures. In this study, a supercapacitor electrode material derived from an immiscible polymer blend comprising polyacrylonitrile (PAN) and polymethyl methacrylate (PMMA) was investigated. PAN was used as the carbonizing polymer while PMMA was used as the sacrificial polymer. The polymer blend solutions in DMF were electrospun to obtain freestanding nanofiber mats. The resulting mat was carbonized and activated by CO2 at 1000 °C to obtain porous carbon nanofibers (CNFs), as PAN converts to carbon and the sacrificial polymer decomposes creating pores. We demonstrated that the pore sizes can be tuned by varying the amount of PMMA loading in the blend compositions. PAN : PMMA (95 : 5), was found to be the optimum blend composition, affording the highest surface area of 2419 m2 g−1, higher degree of graphitization, higher carbon yield and lower charge transfer resistance among the blend compositions studied. Furthermore, the PAN : PMMA (95 : 5) CNFs showed the highest capacitance of 140 F g−1 and energy densities of 67 W h kg−1 at 3.5 V and 101 W h kg−1 at 4 V in an ionic electrolyte (EMITFSI) and also showed good cycling stability with 85% capacitance retention after 1000 cycles.

Graphical abstract: Supercapacitor performance of carbon nanofiber electrodes derived from immiscible PAN/PMMA polymer blends

Article information

Article type
Paper
Submitted
17 ዲሴም 2014
Accepted
06 ፌብሩ 2015
First published
06 ፌብሩ 2015

RSC Adv., 2015,5, 19865-19873

Supercapacitor performance of carbon nanofiber electrodes derived from immiscible PAN/PMMA polymer blends

N. C. Abeykoon, J. S. Bonso and J. P. Ferraris, RSC Adv., 2015, 5, 19865 DOI: 10.1039/C4RA16594B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements