Issue 22, 2014

Controllable fabrication of nanostructured materials for photoelectrochemical water splitting via atomic layer deposition

Abstract

Photoelectrochemical (PEC) water splitting is an attractive approach to generate hydrogen as a clean chemical fuel from solar energy. But there remain many fundamental issues to be solved, including inadequate photon absorption, short carrier diffusion length, surface recombination, vulnerability to photo-corrosion, and unfavorable reaction kinetics. Owing to its self-limiting surface reaction mechanism, atomic layer deposition (ALD) is capable of depositing thin films in a highly controllable manner, which makes it an enabling technique to overcome some of the key challenges confronted by PEC water splitting. This tutorial review describes some unique and representative applications of ALD in fabricating high performance PEC electrodes with various nanostructures, including (i) coating conformal thin films on three-dimensional scaffolds to facilitate the separation and migration of photocarriers and enhance light trapping, as well as realizing controllable doping for bandgap engineering and forming homojunctions for carrier separation; (ii) achieving surface modification through deposition of anti-corrosion layers, surface state passivation layers, and surface catalytic layers; and (iii) identifying the main rate limiting steps with model electrodes with highly defined thickness, composition, and interfacial structure.

Graphical abstract: Controllable fabrication of nanostructured materials for photoelectrochemical water splitting via atomic layer deposition

Article information

Article type
Tutorial Review
Submitted
16 ኦክቶ 2013
First published
06 ፌብሩ 2014

Chem. Soc. Rev., 2014,43, 7469-7484

Controllable fabrication of nanostructured materials for photoelectrochemical water splitting via atomic layer deposition

T. Wang, Z. Luo, C. Li and J. Gong, Chem. Soc. Rev., 2014, 43, 7469 DOI: 10.1039/C3CS60370A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements