Issue 24, 2015

High performance composite polymer electrolytes for lithium-ion polymer cells composed of a graphite negative electrode and LiFePO4 positive electrode

Abstract

Core–shell structured SiO2 particles with different core diameters were synthesized by radical polymerization of 4-styrenesulfonic acid sodium salt with vinyl-functionalized SiO2 core particles and were used as Li+ ion-conducting fillers in composite polymer electrolytes. Composite polymer electrolytes prepared with core–shell SiO2 particles exhibited high ionic conductivity exceeding 10−3 S cm−1 at room temperature and good mechanical properties, allowing the preparation of a free-standing film with a thickness of 30 μm. Lithium-ion polymer cells composed of graphite negative electrode, composite polymer electrolyte and LiFePO4 positive electrode were assembled, and their cycling performance was evaluated. Cells assembled with a composite polymer electrolyte containing core–shell SiO2 particles with a core diameter of 250 nm exhibited good cycling performance in terms of discharge capacity, capacity retention and rate capability.

Graphical abstract: High performance composite polymer electrolytes for lithium-ion polymer cells composed of a graphite negative electrode and LiFePO4 positive electrode

Article information

Article type
Paper
Submitted
04 ዲሴም 2014
Accepted
05 ፌብሩ 2015
First published
11 ፌብሩ 2015

RSC Adv., 2015,5, 18359-18366

Author version available

High performance composite polymer electrolytes for lithium-ion polymer cells composed of a graphite negative electrode and LiFePO4 positive electrode

Y. Lee, W. Shin, J. S. Kim and D. Kim, RSC Adv., 2015, 5, 18359 DOI: 10.1039/C4RA15767B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements