3D printed hydrogel network regulation based on macroinitiator-induced rapid photoATRP

Menghan Si, Mengjie Zhou, Wenjie Zhang, Ge Shi, Yanjie He, Xiaoguang Qiao, Weihua Fan and Xinchang Pang

Polym. Chem., 2024, 15, 3121
DOI: 10.1039/D4PY00365A

Enhanced dual photo/thermal initiating systems for preparation of few layer graphene filler-based composites and 3D printing

Qiang Ma, Michael Schmitt, Yijun Zhang, Gautier Schrodj, Loïc Vidal, Elea Collanges, Dominique Begin and Jacques Lalevée

Mater. Chem. Front., 2022, 6, 3253
DOI: 10.1039/D2QM00644H

Living polymer networks prepared by controlled radical polymerization techniques

Chris William Anderson Bainbridge, Andika Wangsadijaya, Neil Broderick and Jianyong Jin

Polym. Chem., 2022, 13, 1484
DOI: 10.1039/D1PY01692J

Graphene inks for printing based on thermoresponsive ABC triblock terpolymer gels

Xu Liu, Bailin Feng, Stefano Tagliaferri, Anna P. Constantinou, Alexandra E. Porter, Cecilia Mattevi and Theoni K. Georgiou

RSC Appl. Polym., 2025, 3, 973
DOI: 10.1039/D5LP00071H

3D printing polymerizable eutectics via RAFT polymerization

Nathaniel Corrigan, Alexandra L. Mutch, Cyrille Boyer and Stuart C. Thickett

RSC Appl. Polym., 2024, 2, 914
DOI: 10.1039/D4LP00144C

Evaluating the Performance of 3D-Printed PLA Reinforced with Date Pit Particles for Its Suitability as an Acetabular Liner in Artificial Hip Joints

Ahmed Fouly, Ibrahim Alnaser, Abdulaziz Assaifan and Hany Abdo

Polymers, 2022, 14, 3321
DOI: 10.3390/polym14163321

Emerging trends in development and application of 3D printed nanocomposite polymers for sustainable environmental solutions

Shabnam Siddiqui, Srinath Surananai, Krishnamurthy Sainath, Mohammed Zubair Khan, Raghu Raja Pandiyan Kuppusamy and Yalachigere Kempaiah Suneetha

European Polymer Journal, 2023, 196, 112298
DOI: 10.1016/j.eurpolymj.2023.112298

Recent Trends in Advanced Photoinitiators for Vat Photopolymerization 3D Printing

Yinyin Bao

Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202200202

Supercritical Impregnation of Mango Leaf Extract into PLA 3D-Printed Devices and Evaluation of Their Biocompatibility with Endothelial Cell Cultures

Pilar Grosso, Cristina Cejudo, Ismael Sánchez-Gomar, Mª Carmen Durán-Ruiz, Rafael Moreno-Luna, Lourdes Casas, Clara Pereyra and Casimiro Mantell

Polymers, 2022, 14, 2706
DOI: 10.3390/polym14132706

Tuning the Mechanical Properties of 3D‐printed Objects by Mixing Chain Transfer Agents in Radical Promoted Cationic RAFT Polymerization

Guangliang Li, Bowen Zhao, Yuzhen Zhu, Shiliang He, Jiajia Li, Jian Zhu and Na Li

Macromol. Rapid Commun., 2024, 45
DOI: 10.1002/marc.202400515

Investigating Dynamic Changes in 3D‐Printed Covalent Adaptable Polymer Networks

Yixuan Jia, Christoph A. Spiegel, Juliane Diehm, Daniel Zimmermann, Birgit Huber, Hatice Mutlu, Matthias Franzreb, Manfred Wilhelm, Patrick Théato, Eva Blasco and Manuel Tsotsalas

Macro Materials & Eng, 2024, 309
DOI: 10.1002/mame.202300438

Lichtinduzierte Polymerisation katalysiert durch Kohlenstoff‐Nanomaterialien

Xiongfei Luo, Yingxiang Zhai, Ping Wang, Bing Tian, Shouxin Liu, Jian Li, Chenhui Yang, Veronika Strehmel, Shujun Li, Krzysztof Matyjaszewski, Gorkem Yilmaz, Bernd Strehmel and Zhijun Chen

Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202316431

Xolography for Rapid Volumetric Production of Objects from the Nanoscopic to Macroscopic Length Scales

Xichuan Li, Yuan Xiu, Kenny Lee, Jin Zhang, Nathaniel Corrigan and Cyrille Boyer

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202503245

3D Printing of Customized Drug Delivery Systems with Controlled Architecture via Reversible Addition‐Fragmentation Chain Transfer Polymerization

Ali Bagheri, Mitra Asadi-Eydivand, Adam A. Rosser, Christopher M. Fellows and Trevor C. Brown

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202201785

Characterization and Multiscale Modeling of the Mechanical Properties for FDM-Printed Copper-Reinforced PLA Composites

Arda Özen, Gregor Ganzosch, Christina Völlmecke and Dietmar Auhl

Polymers, 2022, 14, 3512
DOI: 10.3390/polym14173512

Direct-ink-write 3D printing of “living” polymer hydrogels via type I photoinitiated RAFT polymerization

Patrick Imrie, Olaf Diegel and Jianyong Jin

Polymer, 2023, 276, 125944
DOI: 10.1016/j.polymer.2023.125944

RAFT-Mediated 3D Printing of “Living” Materials with Tailored Hierarchical Porosity

Mitra Asadi-Eydivand, Trevor C. Brown and Ali Bagheri

ACS Appl. Polym. Mater., 2022, 4, 4940
DOI: 10.1021/acsapm.2c00500

3D Printing based on Photopolymerization and Photocatalysts: Review and Prospect

Jia Li, Cyrille Boyer and Xuewen Zhang

Macro Materials & Eng, 2022, 307
DOI: 10.1002/mame.202200010

Medical 3D Printing Using Desktop Inverted Vat Photopolymerization: Background, Clinical Applications, and Challenges

Parimal Patel, Kashish Dhal, Rajul Gupta, Karthik Tappa, Frank J. Rybicki and Prashanth Ravi

Bioengineering, 2023, 10, 782
DOI: 10.3390/bioengineering10070782

RAFT Polymerization for Advanced Morphological Control: From Individual Polymer Chains to Bulk Materials

Karen Hakobyan, Fumi Ishizuka, Nathaniel Corrigan, Jiangtao Xu, Per B. Zetterlund, Stuart W. Prescott and Cyrille Boyer

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202412407

Application of RAFT in 3D Printing: Where Are the Future Opportunities?

Ali Bagheri

Macromolecules, 2023, 56, 1778
DOI: 10.1021/acs.macromol.2c02585

Design of enhanced mechanical properties by interpenetrating network of 3D printing dual-curing resins

Haohuan Wang, Zhengyong Huang, Yingfan Zhang, Licheng Li and Jian Li

Polymer, 2023, 282, 126153
DOI: 10.1016/j.polymer.2023.126153

Photoinduced 3D Printing via Hybrid RAFT/Cationic Polymerization

Chongyang Yang, Xiaofeng Pan, Zhihan Yuan, Xiangqiang Pan, Jiajia Li and Jian Zhu

Macromolecules, 2025
DOI: 10.1021/acs.macromol.5c02907

Engineering rigid-flexible interfacial structure in carbon fiber-reinforced composites via mussel-inspired chemistry-assisted RAFT polymerization

Lin Zhou, Xiaowei Liu, Tianjiao Li and Yangcheng Lu

Composites Part B: Engineering, 2025, 304, 112644
DOI: 10.1016/j.compositesb.2025.112644

Photoinduced RAFT Step‐Growth Polymerization toward Degradable Living Polymer Networks

Zhuang Li, Jiajia Li, Bowen Zhao, Xiaofeng Pan, Xiangqiang Pan and Jian Zhu

Chin. J. Chem., 2023, 41, 503
DOI: 10.1002/cjoc.202200620

Degradable 3D Printed Objects with Tunable Mechanical Properties via Photoinduced Free Radical Promoted Cationic RAFT Polymerization

Bowen Zhao, Jiajia Li, Xinrui Yang, Shiliang He, Xiangqiang Pan and Jian Zhu

ACS Appl. Polym. Mater., 2024, 6, 1584
DOI: 10.1021/acsapm.3c03164

Tuning the Mechanical Properties of 3D‐Printed Objects by Mixing Chain Transfer Agents in Norrish Type I Photoinitiated RAFT Polymerization

Zhihan Yuan, Guangliang Li, Chongyang Yang, Wenxuan Zhu, Jiajia Li and Jian Zhu

Chemistry An Asian Journal, 2024, 19
DOI: 10.1002/asia.202400648

Controllable size of graphite nanosheets and functionalized SiO2 microspheres with excellent anti-corrosive/wear function for superhydrophobic coating

Huachao Ma, Xuyang Zhang, Xiaogen Liu, Detian Wan and Kuilin Lv

Materials Today Communications, 2024, 40, 110026
DOI: 10.1016/j.mtcomm.2024.110026

Charge Transfer Complexes (CTCs) with Pyridinium Salts: Toward Efficient Dual Photochemical/Thermal Initiators and 3D Printing Applications

Qiang Ma, Loïc Buchon, Valentin Magné, Bernadette Graff, Fabrice Morlet‐Savary, Yangyang Xu, Mahmoud Benltifa, Sami Lakhdar and Jacques Lalevée

Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202200314

Xanthate-Based Photoiniferter RAFT Polymerization toward Oxygen-Tolerant and Rapid Living 3D Printing

Bowen Zhao, Jiajia Li, Yuan Xiu, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu

Macromolecules, 2022, 55, 1620
DOI: 10.1021/acs.macromol.1c02521

Combination of NIR and UV‐LEDs enables physical and chemical drying of aqueous coating dispersions as new green technology

Lukas Appelhoff, Nicolas Hornemann, Jochen Schmidt, Anita Krautz and Bernd Strehmel

Applied Research, 2024, 3
DOI: 10.1002/appl.202400011

Influence of thiocarbonylthio- RAFT agents on the homogeneity of polymer network and mechanical properties of 3D printed polymers

Emile Goldbach, Xavier Allonas, Celine Croutxé-Barghorn, Christian Ley, Lucile Halbardier and Gildas L'Hostis

European Polymer Journal, 2023, 188, 111947
DOI: 10.1016/j.eurpolymj.2023.111947

Characterization of 3D Printed Metal-PLA Composite Scaffolds for Biomedical Applications

Irene Buj-Corral, Héctor Sanz-Fraile, Anna Ulldemolins, Aitor Tejo-Otero, Alejandro Domínguez-Fernández, Isaac Almendros and Jorge Otero

Polymers, 2022, 14, 2754
DOI: 10.3390/polym14132754

The Emergence of Reversible–Deactivation Radical Polymerization in 3D Printing

Valentin A. Bobrin, Jin Zhang, Nathaniel Corrigan and Cyrille Boyer

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202201054

Fast Living 3D Printing via Free Radical Promoted Cationic RAFT Polymerization

Bowen Zhao, Jiajia Li, Guangliang Li, Xinrui Yang, Shaopu Lu, Xiangqiang Pan and Jian Zhu

Small, 2023, 19
DOI: 10.1002/smll.202207637

Reversible bond formation via sulfur free reversible addition fragmentation in photo-3D printing

Zhongyuan Wan, Lee Wai Hin, Ataulla Shegiwal and David Haddleton

European Polymer Journal, 2023, 196, 112324
DOI: 10.1016/j.eurpolymj.2023.112324

Advances in Optimizing Mechanical Performance of 3D‐Printed Polymer Composites: A Microstructural and Processing Enhancements Review

Sivakumar Jaganathan, Raju Kandasamy, Ravikumar Venkatachalam, Muthu Gunalan, Ratchagaraja Dhairiyasamy and Hussein Sharaf

Advances in Polymer Technology, 2024, 2024
DOI: 10.1155/2024/3168252

Soda lignin as a sustainable photosensitive component for conventional and controlled radical photopolymerization

Min Wang, Xiongfei Luo, Qunying Wang, Veronika Strehmel, Zhijun Chen, Shujun Li and Bernd Strehmel

Commun Chem, 2025, 8
DOI: 10.1038/s42004-025-01593-0

Light‐Mediated Polymerization Catalyzed by Carbon Nanomaterials

Xiongfei Luo, Yingxiang Zhai, Ping Wang, Bing Tian, Shouxin Liu, Jian Li, Chenhui Yang, Veronika Strehmel, Shujun Li, Krzysztof Matyjaszewski, Gorkem Yilmaz, Bernd Strehmel and Zhijun Chen

Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202316431

Nano- to macro-scale control of 3D printed materials via polymerization induced microphase separation

Valentin A. Bobrin, Yin Yao, Xiaobing Shi, Yuan Xiu, Jin Zhang, Nathaniel Corrigan and Cyrille Boyer

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-31095-9

3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties

Florian Lackner, Ivan Knechtl, Maximilian Novak, Chandran Nagaraj, Andreja Dobaj Štiglic, Rupert Kargl, Andrea Olschewski, Karin Stana Kleinschek and Tamilselvan Mohan

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202201708

A Regression Approach to Model Refractive Index Measurements of Novel 3D Printable Photocurable Resins for Micro-Optofluidic Applications

Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Giovanna Stella, Gianluca Cicala and Maide Bucolo

Polymers, 2023, 15, 2690
DOI: 10.3390/polym15122690