On the resistivity, temperature coefficient of resistance, and ampacity of Cu–CNT and Ni–CNT composites

Antoine Duhain, Guillaume Lamblin and Damien Lenoble

RSC Adv., 2021, 11, 40159
DOI: 10.1039/D1RA07048G

Copper–CNT interfacing with Cu-doped polydopamine in CNT carpet: copper nucleation and resistance decrease upon soft annealing

Antoine Duhain, Jérôme Guillot, Guillaume Lamblin and Damien Lenoble

RSC Adv., 2021, 11, 11900
DOI: 10.1039/D0RA09369F

Carbon nanotube functionalization as a route to enhancing the electrical and mechanical properties of Cu–CNT composites

Karolina Z. Milowska, Marek Burda, Lidia Wolanicka, Paul D. Bristowe and Krzysztof K. K. Koziol

Nanoscale, 2019, 11, 145
DOI: 10.1039/C8NR07521B

Iridium-catalyzed growth of single-walled carbon nanotubes with a bicentric diameter distribution

Han Xue, Liantao Xin, Ziwei Xu, Ruiqin Bai, Qianru Wu, Benwu Xin, Xiuyun Zhang, Hongzhi Cui, Fushan Chen and Maoshuai He

Mater. Chem. Front., 2019, 3, 1882
DOI: 10.1039/C9QM00267G

Effect of dispersion and alignment of graphite fibers on thermal expansion induced fracture of graphite fiber/copper composite

June-Young Lee, Youhan Sohn, Hye Sung Kim and Jun Hyun Han

Materials Today Communications, 2020, 25, 101450
DOI: 10.1016/j.mtcomm.2020.101450

Research progress, potentials, and challenges of copper composite for metal injection moulding feedstock

Widyastuti, Eka Nurul Falah, Vania Mitha Pratiwi, Iyando Adityawan, Ninik Safrida, Elisabeth Wikandari, Alvin Rahmad Widiyanto and Romario Abdullah

Powder Technology, 2024, 440, 119785
DOI: 10.1016/j.powtec.2024.119785

Electrophoretic deposition of graphene coating on copper for improved thermoelectric performance of wire rods

Gabriele Baiocco, Silvio Genna, Daniel Salvi and Nadia Ucciardello

Int J Adv Manuf Technol, 2024, 133, 5761
DOI: 10.1007/s00170-024-14042-4

Electronic and magneto-transport in chirality sorted carbon nanotube films

Dawid Janas, Nikodem Czechowski, Zbigniew Adamus and Tomasz Giżewski

Applied Physics Letters, 2018, 112
DOI: 10.1063/1.5011090

Graphene/CNT Nanocomposites: Processing, Properties, and Applications

Sachin Kumar Sharma, Slavica Miladinović, Lokesh Kumar Sharma, Sandra Gajević, Yogesh Sharma, Mohit Sharma, Stefan Čukić and Blaža Stojanović

Nanomaterials, 2026, 16, 100
DOI: 10.3390/nano16020100

The effect of reduced graphene oxide content on the microstructural and mechanical properties of copper metal matrix composites

Egemen Avcu, Huatang Cao, Xun Zhang, Yi Guo, Philip J. Withers, Xiuhui Li, Nan Wang, Shaojiu Yan and Ping Xiao

Materials Science and Engineering: A, 2022, 856, 143921
DOI: 10.1016/j.msea.2022.143921

Copper/carbon nanotube composites: research trends and outlook

Rajyashree M. Sundaram, Atsuko Sekiguchi, Mizuki Sekiya, Takeo Yamada and Kenji Hata

R. Soc. open sci., 2018, 5, 180814
DOI: 10.1098/rsos.180814

Interface structure and strengthening behavior of graphene/CuCr composites

Ke Chu, Fan Wang, Yu-biao Li, Xiao-hu Wang, Da-jian Huang and Hu Zhang

Carbon, 2018, 133, 127
DOI: 10.1016/j.carbon.2018.03.018

Interface-dominated strengthening, deformation and electrical transport behaviors of Cu nanocomposites rendered by nitrogen-doped carbon nanotubes

Wei Sun, Xiaofeng Chen, Jingmei Tao, Caiju Li, Liang Liu, Zunyan Xu and Jianhong Yi

Materials Science and Engineering: A, 2025, 947, 149167
DOI: 10.1016/j.msea.2025.149167

Fabrication and mechanical properties of MWCNTs and graphene synergetically reinforced Cu–graphite matrix composites

Rui Shu, Xiaosong Jiang, Zhenyi Shao, Daming Sun, Degui Zhu and Zhiping Luo

Powder Technology, 2019, 349, 59
DOI: 10.1016/j.powtec.2019.03.021

In-situ synthesis of graphene-like carbon encapsulated copper particles for reinforcing copper matrix composites

Shengcheng Shu, Qilong Yuan, Wen Dai, Mingliang Wu, Dan Dai, Ke Yang, Bo Wang, Cheng-Te Lin, Thomas Wuebben, Jost Degenhardt, Christoph Regula, Ralph Wilken, Nan Jiang and Joerg Ihde

Materials & Design, 2021, 203, 109586
DOI: 10.1016/j.matdes.2021.109586

Optimizing mechanical and electrical properties of nanotwinned copper-carbon nanotube composite foils

Ciao-Yun Luo, Kang-Ping Lee, Mai-Phuong La, Chih-Chi Tsai, Wen-Wei Wu and Chih Chen

Journal of Alloys and Compounds, 2026, 1050, 185621
DOI: 10.1016/j.jallcom.2025.185621

Copper recovery from industrial wastewater - Synergistic electrodeposition onto nanocarbon materials

Grzegorz Stando, Pyry-Mikko Hannula, Bogumiła Kumanek, Mari Lundström and Dawid Janas

Water Resources and Industry, 2021, 26, 100156
DOI: 10.1016/j.wri.2021.100156

From Waste Plastics to Carbon Nanotube Audio Cables

Varun Shenoy Gangoli, Tim Yick, Fang Bian and Alvin Orbaek White

C, 2022, 8, 9
DOI: 10.3390/c8010009

Tensile and Compressive Behavior of CHC‐Reinforced Copper using Molecular Dynamics

Bruno Faria, Nuno Silvestre and José N. Canongia Lopes

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202300147

The Computational Study of Epoxy-based Nanocomposites Electromechanical Performance under External Force: Molecular Dynamics Approach

Peyman Torkian and Hamid Baseri

JCC, 2024, 5, 153
DOI: 10.61186/jcc.5.3.1

Understanding the effect of carbon nanotube functionalization on copper electrodeposition

Ewa Kazimierska, Enrico Andreoli and Andrew R. Barron

J Appl Electrochem, 2019, 49, 731
DOI: 10.1007/s10800-019-01318-x

Carbon Nanotube Fiber Pretreatments for Electrodeposition of Copper

Pyry-Mikko Hannula, Minttu Junnila, Dawid Janas, Jari Aromaa, Olof Forsén, Mari Lundström and Fabrizio Pirri

Advances in Materials Science and Engineering, 2018, 2018
DOI: 10.1155/2018/3071913

Electrodeposition of Cu–SWCNT Composites

Pavan M. V. Raja, Gibran L. Esquenazi, Cathren E. Gowenlock, Daniel R. Jones, Jianhua Li, Bruce Brinson and Andrew R. Barron

C, 2019, 5, 38
DOI: 10.3390/c5030038

FABRICATION AND CHARACTERIZATION OF THE MECHANICAL PROPERTIES OF COPPER MATRIX COMPOSITE REINFORCED BY GRAPHENE – CARBON NANOTUBE HYBRID MATERIALS

Doan Dinh Phuong, Tran Bao Trung, Phan Ngoc Minh and Pham Van Trinh

Vietnam J. Sci. Technol., 2025
DOI: 10.15625/2525-2518/22153

Thermal properties and thermal cycling stability of graphite/copper composite fabricated by microwave sintering

Zemin Wang, Zhimeng Tang, Lei Xu, Zhaohui Han, Jianhua Liu and Libo Zhang

Journal of Materials Research and Technology, 2022, 20, 1352
DOI: 10.1016/j.jmrt.2022.07.147

Synthesis and processing techniques of copper–graphene reinforced metal matrix composites: a review

Gourab Sen and Subhas Chandra Mondal

Eng. Res. Express, 2025, 7, 032503
DOI: 10.1088/2631-8695/adfdad

Increased Electrical Conductivity of Carbon Nanotube Fibers by Thermal and Voltage Annealing

Varun Shenoy Gangoli, Chris J. Barnett, James D. McGettrick, Alvin Orbaek White and Andrew R. Barron

C, 2021, 8, 1
DOI: 10.3390/c8010001

Development and Performance Analysis of Copper–Graphene Composite Electrodes for Electrical Discharge Machining Applications

Gourab Sen, Subhas Chandra Mondal and Ranjan Kumar Ghadai

J. Inst. Eng. India Ser. C, 2026, 107, 419
DOI: 10.1007/s40032-025-01299-1

Nanocomposite materials in orthopedic applications

Mostafa R. Shirdar, Nasim Farajpour, Reza Shahbazian-Yassar and Tolou Shokuhfar

Front. Chem. Sci. Eng., 2019, 13, 1
DOI: 10.1007/s11705-018-1764-1

Facile synthesis of high-performance carbon nanosheet/Cu composites from copper formate

Zhendong Shi, Jie Sheng, Ziyue Yang, Zhaoyuan Liu, Shi Chen, Miao Wang, Lidong Wang and Weidong Fei

Carbon, 2020, 165, 349
DOI: 10.1016/j.carbon.2020.04.061

CNT-sandwiched copper composites as super thermal conductors for heat management

Pengjie Wang, Qiang Cao, Huaipeng Wang, Sheng Liu, Yuanping Chen and Qing Peng

Physica E: Low-dimensional Systems and Nanostructures, 2021, 128, 114557
DOI: 10.1016/j.physe.2020.114557

A comprehensive review on the role of some important nanocomposites for antimicrobial and wastewater applications

T. Naseem and M. Waseem

Int. J. Environ. Sci. Technol., 2022, 19, 2221
DOI: 10.1007/s13762-021-03256-8

Advances in the Science and Engineering of Metal Matrix Nanocomposites: A Review

Chezheng Cao, Alexander Killips and Xiaochun Li

Adv Eng Mater, 2024, 26
DOI: 10.1002/adem.202400217

Remarkable tribo-mechanical, anticorrosion and antibacterial properties of ZnCu/GNPs composite coatings prepared by electro-co-deposition technique

Ayush Owhal, Ajay D. Pingale, Sachin U. Belgamwar and Jitendra S. Rathore

Journal of Alloys and Metallurgical Systems, 2024, 6, 100083
DOI: 10.1016/j.jalmes.2024.100083

Friction and wear performance of a copper-based bond emery wheel for rail grinding

Lu-cheng Cai, Xiao-song Jiang, Yu-cheng Guo, Da-ming Sun, Xing-long Wang, Ji-nan Kuai and Lin-yan Pang

Materials Testing, 2020, 62, 1205
DOI: 10.3139/120.111594

Molecular study on convective heat transfer of nanofluid in nanochannel: effect of CNT particles

Zhuolin Tang, Jin Zhao and Yanbiao Wang

J Therm Anal Calorim, 2024, 149, 1419
DOI: 10.1007/s10973-023-12729-6

The Role of Graphene on Microstructural, Mechanical, and Tribological Properties of Cu–AlCrFeCuNi Metal Matrix Composites Fabricated via Spark Plasma Sintering

Harun Yanar, Müslİm Çelebİ, Dursun Murat Sekban, Serdar Özkaya, Abdullah Hasan Karabacak and Ertuğrul Çelİk

Metall Mater Trans A, 2026
DOI: 10.1007/s11661-026-08207-x

Comparative Thermal Analysis of Carbon Nanotubes and Their Metal Composites with Copper and Aluminum as Winding Material in Induction Motor

Atazaz Hassan, Chen Quanfang, Sajid Abbas, Liu Jie, Luo Youming and Fida Hussain

J. Electr. Eng. Technol., 2022, 17, 2353
DOI: 10.1007/s42835-022-01072-9

Copper carbon composite wire with a uniform carbon dispersion made by friction extrusion

Xiao Li, Chen Zhou, Nicole Overman, Xiaolong Ma, Nathan Canfield, Keerti Kappagantula, James Schroth and Glenn Grant

Journal of Manufacturing Processes, 2021, 65, 397
DOI: 10.1016/j.jmapro.2021.03.055

A Straightforward Approach to Create Ag/SWCNT Composites

Monika Rdest and Dawid Janas

Materials, 2021, 14, 1956
DOI: 10.3390/ma14081956

Synthesis of Copper–Carbon Nanocomposites and Their Application as Electrocatalysts

N. M. Ivanova, Ye. A. Soboleva and Ya. A. Vissurkhanova

Russ J Appl Chem, 2025, 98, 10
DOI: 10.1134/S1070427225010033

Preparation of carbon nanotubes with high filling rate of copper nanoparticles

Rongju Zhong, Jingmei Tao, Xu Yang, Zhihua Fu, Hongmei Yang, Zhoumeng Pu, Rui Bao, Yichun Liu and Jianhong Yi

Microporous and Mesoporous Materials, 2022, 344, 112231
DOI: 10.1016/j.micromeso.2022.112231

Microstructure and mechanical properties of Cu-ZTA cermet prepared by vacuum hot pressing sintering

Da-Ming Sun, Xiao-song Jiang, Hong-liang Sun, Ting-feng Song and Zhi-ping Luo

Mater. Res. Express, 2020, 7, 026530
DOI: 10.1088/2053-1591/ab6c19

Microstructure and mechanical properties of nano-carbon reinforced Cu-based powder metallurgy friction materials produced by hot isostatic pressing

Rui Shu, Xiaosong Jiang, Jiaxin Jiang and Degui Zhu

Materials Testing, 2018, 60, 809
DOI: 10.3139/120.111217

Performance analysis of copper-based MWCNT composite coated 316L SS tool in electro discharge machining

Prosun Mandal and Subhas Chandra Mondal

Machining Science and Technology, 2021, 25, 422
DOI: 10.1080/10910344.2020.1855652

Fabrication of Cu-graphite metal matrix composites by ball milling and spark plasma sintering

Barbara Lasio, Francesco Torre, Roberto Orrù, Giacomo Cao, Marcello Cabibbo and Francesco Delogu

Materials Letters, 2018, 230, 199
DOI: 10.1016/j.matlet.2018.07.120

Synergistic Mixing Effects on Electrical and Mechanical Properties in Homogeneous CNT/Cu Composites

Kosuke Tanaka, Takayuki Nakano, Yoshinobu Shimamura and Yoku Inoue

ACS Appl. Eng. Mater., 2023, 1, 2359
DOI: 10.1021/acsaenm.3c00269

Review of Recent Development in Copper/Carbon Composites Prepared by Infiltration Technique

Selim Burak Cantürk and Jaroslav Kováčik

Energies, 2022, 15, 5227
DOI: 10.3390/en15145227

Recent Advances in Characterization Techniques for the Interface in Carbon Nanotube-Reinforced Polymer Nanocomposites

Junjie Chen, Xuhui Gao and Deguang Xu

Advances in Materials Science and Engineering, 2019, 2019, 1
DOI: 10.1155/2019/5268267

Recent researches of the bio-inspired nano-carbon reinforced metal matrix composites

Rui Shu, Xiaosong Jiang, Hongliang Sun, Zhenyi Shao, Tingfeng Song and Zhiping Luo

Composites Part A: Applied Science and Manufacturing, 2020, 131, 105816
DOI: 10.1016/j.compositesa.2020.105816

A Comprehensive Review on Advances in Synthesis and Characterization of Nanocomposite: Current Status and Emerging Applications

P. Nivetha, R. Siranjeevi, R. Susmitha, S. Sameera Shabnum, C. Krishna Raj, K. Benazir, A. Saravanan and A. S. Vickram

Environmental Quality Mgmt, 2025, 35
DOI: 10.1002/tqem.70108

Electro-codeposition and properties of Cu–Ni-MWCNTs composite coatings

Ajay D. Pingale, Ayush Owhal, Sachin U. Belgamwar and Jitendra S. Rathore

Transactions of the IMF, 2021, 99, 126
DOI: 10.1080/00202967.2021.1861848

EXPERIMENTAL INVESTIGATION ON THE PERFORMANCE OF COPPER-BASED MWCNT COMPOSITE ELECTRODE IN EDM

PROSUN MANDAL and SUBHAS CHANDRA MONDAL

Surf. Rev. Lett., 2022, 29
DOI: 10.1142/S0218625X22501414

Self-assembling TiO2 interface-modified layer in CNTf/Ti/Cu composite towards high strength and high thermal conductivity

Longpeng Wang, Jinlei Qi, Xingjia He, Jun Hao, Ning Wang, Kan Zhang, Minjuan Wang, Hao Huang, Xueqian Lei and Mao Wen

Applied Surface Science, 2026, 722, 165531
DOI: 10.1016/j.apsusc.2025.165531

Effects of shape and alignment of reinforcing graphite phases on the thermal conductivity and the coefficient of thermal expansion of graphite/copper composites

Youhan Sohn, Taeyang Han and Jun Hyun Han

Carbon, 2019, 149, 152
DOI: 10.1016/j.carbon.2019.04.055

Effect of TiB2 addition on the microstructural, electrical, and mechanical behavior of Cu–TiB2 composites processed via spark plasma sintering

C Ayyappadas, Ravi Teja, A. Raja Annamalai, Dinesh K Agrawal, Shaik Dilkush and A. Muthuchamy

International Journal of Materials Research, 2021, 112, 118
DOI: 10.1515/ijmr-2020-7849

Chitosan based Nanocomposites: Its Synthesis, Characterization and Applications in Various Fields: A Review

Manisha D.Patil

International Journal of Innovative Science and Research Technology (IJISRT), 2024, 525
DOI: 10.38124/ijisrt/IJISRT24JUL661

Carbon nanotube and graphene reinforced magnesium matrix composites: A state-of-the-art review

Lava Kumar Pillari, Kyle Lessoway and Lukas Bichler

Journal of Magnesium and Alloys, 2023, 11, 1825
DOI: 10.1016/j.jma.2023.05.010

Effect of different processing techniques on hardness, electrical and thermal conductivity of Copper/Carbon nanotube composites for industrial applications

R. Vignesh Babu and S. Kanagaraj

Diamond and Related Materials, 2021, 120, 108634
DOI: 10.1016/j.diamond.2021.108634

Investigation of using CNT and Cu/CNT Wires for Replacing Cu for Power Electronics and Electrical Applications

Femi Robert, A. Amalin Prince and A. R. Jac Fredo

ECS J. Solid State Sci. Technol., 2022, 11, 023011
DOI: 10.1149/2162-8777/ac5471