3D-Reactive printing of engineered alginate inks

Lorenzo Sardelli, Marta Tunesi, Francesco Briatico-Vangosa and Paola Petrini

Soft Matter, 2021, 17, 8105
DOI: 10.1039/D1SM00604E

Artificial testis: a testicular tissue extracellular matrix as a potential bio-ink for 3D printing

Zahra Bashiri, Iraj Amiri, Mazaher Gholipourmalekabadi, Reza Falak, Hamidreza Asgari, Chad B. Maki, Ali Moghaddaszadeh and Morteza Koruji

Biomater. Sci., 2021, 9, 3465
DOI: 10.1039/D0BM02209H

3D printing of cellular materials for advanced electrochemical energy storage and conversion

Xiaocong Tian and Kun Zhou

Nanoscale, 2020, 12, 7416
DOI: 10.1039/D0NR00291G

BMSCs-laden gelatin/sodium alginate/carboxymethyl chitosan hydrogel for 3D bioprinting

Jie Huang, Han Fu, Zhiying Wang, Qingyuan Meng, Sumei Liu, Heran Wang, Xiongfei Zheng, Jianwu Dai and Zhijun Zhang

RSC Adv., 2016, 6, 108423
DOI: 10.1039/C6RA24231F

Engineering of hemocompatible and antifouling polyethersulfone membranes by blending with heparin-mimicking microgels

Hai-feng Ji, Lian Xiong, Zhen-qiang Shi, Min He, Wei-feng Zhao and Chang-sheng Zhao

Biomater. Sci., 2017, 5, 1112
DOI: 10.1039/C7BM00196G

A novel thixotropic magnesium phosphate-based bioink with excellent printability for application in 3D printing

You Chen, Yihan Wang, Qian Yang, Yuxi Liao, Bin Zhu, Guoru Zhao, Ru Shen, Xiaobo Lu and Shuxin Qu

J. Mater. Chem. B, 2018, 6, 4502
DOI: 10.1039/C8TB01196F

Naturally sourced hydrogels: emerging fundamental materials for next-generation healthcare sensing

Zhenwu Wang, Hua Wei, Youju Huang, Yen Wei and Jing Chen

Chem. Soc. Rev., 2023, 52, 2992
DOI: 10.1039/D2CS00813K

Development of a new 3D bioprinted antibiotic delivery system based on a cross-linked gelatin–alginate hydrogel

Adam Mirek, Habib Belaid, Fanny Barranger, Marcin Grzeczkowicz, Yasmine Bouden, Vincent Cavaillès, Dorota Lewińska and Mikhael Bechelany

J. Mater. Chem. B, 2022, 10, 8862
DOI: 10.1039/D2TB01268E

3D printable conducting hydrogels containing chemically converted graphene

Sepidar Sayyar, Sanjeev Gambhir, Johnson Chung, David L. Officer and Gordon G. Wallace

Nanoscale, 2017, 9, 2038
DOI: 10.1039/C6NR07516A

Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques

Mohsen Askari, Moqaddaseh Afzali Naniz, Monireh Kouhi, Azadeh Saberi, Ali Zolfagharian and Mahdi Bodaghi

Biomater. Sci., 2021, 9, 535
DOI: 10.1039/D0BM00973C

High-strength hydrogel-based bioinks

Fei Gao, Changshun Ruan and Wenguang Liu

Mater. Chem. Front., 2019, 3, 1736
DOI: 10.1039/C9QM00373H

3D printing of cell-laden electroconductive bioinks for tissue engineering applications

Hadi Rastin, Bingyang Zhang, Jingxiu Bi, Kamrul Hassan, Tran Thanh Tung and Dusan Losic

J. Mater. Chem. B, 2020, 8, 5862
DOI: 10.1039/D0TB00627K

3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel

Sahar Sultan and Aji P. Mathew

Nanoscale, 2018, 10, 4421
DOI: 10.1039/C7NR08966J

3D Bioprinting of shear-thinning hybrid bioinks with excellent bioactivity derived from gellan/alginate and thixotropic magnesium phosphate-based gels

You Chen, Xiong Xiong, Xin Liu, Rongwei Cui, Chen Wang, Guoru Zhao, Wei Zhi, Mengjie Lu, Ke Duan, Jie Weng, Shuxin Qu and Jianhua Ge

J. Mater. Chem. B, 2020, 8, 5500
DOI: 10.1039/D0TB00060D

High-throughput and efficient fabrication of engineered skeletal muscle tissue via streamlined 3D multimaterial bioprinting

Tae-Eun Lim, Ashfaq Ahmad, Yeong-Jin Choi and Hee-Gyeong Yi

Lab Chip, 2026, 26, 2340
DOI: 10.1039/D5LC01040C

Bioprinting of Collagen: Considerations, Potentials, and Applications

Jia Min Lee, Sean Kang Qiang Suen, Wei Long Ng, Wai Cheung Ma and Wai Yee Yeong

Macromolecular Bioscience, 2021, 21
DOI: 10.1002/mabi.202000280

Advanced Bioinks for 3D Printing: A Materials Science Perspective

David Chimene, Kimberly K. Lennox, Roland R. Kaunas and Akhilesh K. Gaharwar

Ann Biomed Eng, 2016, 44, 2090
DOI: 10.1007/s10439-016-1638-y

Photo-/thermo-responsive bioink for improved printability in extrusion-based bioprinting

Seo Hyung Moon, Tae Yoon Park, Hyung Joon Cha and Yun Jung Yang

Materials Today Bio, 2024, 25, 100973
DOI: 10.1016/j.mtbio.2024.100973

Ink-structing the future of vascular tissue engineering: a review of the physiological bioink design

Judith Synofzik, Sebastian Heene, Rebecca Jonczyk and Cornelia Blume

Bio-des. Manuf., 2024, 7, 181
DOI: 10.1007/s42242-024-00270-w

Overview of plant-derived biomaterials

Ahmet Aşkın Yilmaz and İlker Büyük

Commun. Fac. Sci. Univ. Ank. Ser. C, 2025, 34, 104
DOI: 10.53447/communc.1491834

Characterization and Machine Learning-Driven Property Prediction of a Novel Hybrid Hydrogel Bioink Considering Extrusion-Based 3D Bioprinting

Rokeya Sarah, Kory Schimmelpfennig, Riley Rohauer, Christopher L. Lewis, Shah M. Limon and Ahasan Habib

Gels, 2025, 11, 45
DOI: 10.3390/gels11010045

Direct 3D printing of decellularized matrix embedded composite polycaprolactone scaffolds for cartilage regeneration

Stacey M.S. Gruber, Sumit Murab, Paulomi Ghosh, Patrick W. Whitlock and Chia-Ying J. Lin

Biomaterials Advances, 2022, 140, 213052
DOI: 10.1016/j.bioadv.2022.213052

Invitro and Invivo Study of PCL-Hydrogel Scaffold to Advance Bioprinting Translation in Microtia Reconstruction

Payal Mukherjee, Johnson Chung, Kai Cheng, Ruta Gupta, Hannah Haag, Zoe Williams and Gordon Wallace

Journal of Craniofacial Surgery, 2021, 32, 1931
DOI: 10.1097/SCS.0000000000007173

Cardiovascular tissue bioprinting: Physical and chemical processes

James B. Hu, Martin L. Tomov, Jan W. Buikema, Caressa Chen, Morteza Mahmoudi, Sean M. Wu and Vahid Serpooshan

Applied Physics Reviews, 2018, 5
DOI: 10.1063/1.5048807

Development of a Coaxial 3D Printing Platform for Biofabrication of Implantable Islet‐Containing Constructs

Xiao Liu, Sarah‐Sophia D. Carter, Max Jurie Renes, Juewan Kim, Darling Macarena Rojas‐Canales, Daniella Penko, Cameron Angus, Stephen Beirne, Christopher John Drogemuller, Zhilian Yue, Patrick T. Coates and Gordon G. Wallace

Adv Healthcare Materials, 2019, 8
DOI: 10.1002/adhm.201801181

Dual crosslinking strategy to generate mechanically viable cell-laden printable constructs using methacrylated collagen bioinks

Nilabh S. Kajave, Trevor Schmitt, Thuy-Uyen Nguyen and Vipuil Kishore

Materials Science and Engineering: C, 2020, 107, 110290
DOI: 10.1016/j.msec.2019.110290

Vertically Aligned Multiscale Heterojunction Arrays via 3D Printing for Efficient Photocatalytic Nitro-Hydrogenation

Bo Jiang, Chengyang Du, Chuchu Chen, Xinyu Guo, Wenjuan Wu, Chaofeng Zhang, Sehrish Manan, Yongcan Jin and Zhiqiang Liang

ACS Sustainable Chem. Eng., 2026, 14, 3106
DOI: 10.1021/acssuschemeng.5c12258

Advances in electrospun skin substitutes

J.R. Dias, P.L. Granja and P.J. Bártolo

Progress in Materials Science, 2016, 84, 314
DOI: 10.1016/j.pmatsci.2016.09.006

Degradation regulated bioactive hydrogel as the bioink with desirable moldability for microfluidic biofabrication

Xiaolu Liu, Yicong Zuo, Jing Sun, Zhenzhen Guo, Hongsong Fan and Xingdong Zhang

Carbohydrate Polymers, 2017, 178, 8
DOI: 10.1016/j.carbpol.2017.09.014

Factorial Design of Experiment Method to Characterize Bioprinting Process Parameters to Obtain the Targeted Scaffold Porosity

Connor Quigley, Shah M. Limon, Rokeya Sarah and Ahasan Habib

3D Printing and Additive Manufacturing, 2024, 11, 1899
DOI: 10.1089/3dp.2023.0138

Assessment of coaxial printability for extrusion-based bioprinting of alginate-based tubular constructs

Myoung Hwan Kim and Seung Yun Nam

Bioprinting, 2020, 20, e00092
DOI: 10.1016/j.bprint.2020.e00092

Bioprinting Technology: A Current State-of-the-Art Review

Amer B. Dababneh and Ibrahim T. Ozbolat

Journal of Manufacturing Science and Engineering, 2014, 136
DOI: 10.1115/1.4028512

Fabrication and Performance Evaluation of Gelatin/Sodium Alginate Hydrogel-Based Macrophage and MSC Cell-Encapsulated Paracrine System with Potential Application in Wound Healing

Hang Yao, Xiaohui Yuan, Zhonglian Wu, Sumin Park, Wang Zhang, Hui Chong, Liwei Lin and Yuanzhe Piao

IJMS, 2023, 24, 1240
DOI: 10.3390/ijms24021240

Bioink Temperature Influence on Shear Stress, Pressure and Velocity Using Computational Simulation

J. Carlos Gómez-Blanco, Enrique Mancha-Sánchez, Alfonso C. Marcos, Manuel Matamoros, Antonio Díaz-Parralejo and J. Blas Pagador

Processes, 2020, 8, 865
DOI: 10.3390/pr8070865

Printability study of metal ion crosslinked PEG-catechol based inks

Małgorzata K Włodarczyk-Biegun, Julieta I Paez, Maria Villiou, Jun Feng and Aranzazu del Campo

Biofabrication, 2020, 12, 035009
DOI: 10.1088/1758-5090/ab673a

Tissue-Specific Decellularized Extracellular Matrix Bioinks for Musculoskeletal Tissue Regeneration and Modeling Using 3D Bioprinting Technology

Wonbin Park, Ge Gao and Dong-Woo Cho

IJMS, 2021, 22, 7837
DOI: 10.3390/ijms22157837

Effect of the pore size in a 3D bioprinted gelatin scaffold on fibroblast proliferation

Dong Jin Choi, Sang Jun Park, Bon Kang Gu, Young-Jin Kim, Seok Chung and Chun-Ho Kim

Journal of Industrial and Engineering Chemistry, 2018, 67, 388
DOI: 10.1016/j.jiec.2018.07.013

In Vivo Chondrogenesis in 3D Bioprinted Human Cell-laden Hydrogel Constructs

Thomas Möller, Matteo Amoroso, Daniel Hägg, Camilla Brantsing, Nicole Rotter, Peter Apelgren, Anders Lindahl, Lars Kölby and Paul Gatenholm

Plastic and Reconstructive Surgery - Global Open, 2017, 5, e1227
DOI: 10.1097/GOX.0000000000001227

Development of a Platelet Lysate–Based Printable, Transparent Biomaterial With Regenerative Potential for Epithelial Corneal Injuries

Hannah Frazer, Jingjing You, Zhi Chen, Sepidar Sayyar, Xiao Liu, Adam Taylor, Chris Hodge, Gordon Wallace and Gerard Sutton

Trans. Vis. Sci. Tech., 2020, 9, 40
DOI: 10.1167/tvst.9.13.40

Alginate-Based Bioinks for 3D Bioprinting and Fabrication of Anatomically Accurate Bone Grafts

Tomas Gonzalez-Fernandez, Alejandro J. Tenorio, Kevin T. Campbell, Eduardo A. Silva and J. Kent Leach

Tissue Engineering Part A, 2021, 27, 1168
DOI: 10.1089/ten.tea.2020.0305

Coaxial micro-extrusion of a calcium phosphate ink with aqueous solvents improves printing stability, structure fidelity and mechanical properties

Romain Bagnol, Christoph Sprecher, Marianna Peroglio, Jerome Chevalier, Redouan Mahou, Philippe Büchler, Geoff Richards and David Eglin

Acta Biomaterialia, 2021, 125, 322
DOI: 10.1016/j.actbio.2021.02.022

Revolutionizing healthcare: Emerging frontiers in 3D bioprinting of tissues and organs

Ochieng Ben Omondi, Yasinta Nida Arroyan, Benson Onyango, Lingwen Kong, Guixue Wang and Zhiyi Ye

European Polymer Journal, 2024, 217, 113210
DOI: 10.1016/j.eurpolymj.2024.113210

3D Bioprinted Constructs Enriched with Zinc‐Doped Bioactive Glass Promote Antibacterial Activity and Osteochondral Tissue Regeneration

Konstantinos Loukelis, Georgia‐Ioanna Kontogianni, Marcela Arango‐Ospina, Nikoletta Triantopoulou, Kalliopi Alpantaki, Aristea Batsali, Charalampos Pontikoglou, Marina Vidaki, Aldo R. Boccaccini and Maria Chatzinikolaidou

Adv Healthcare Materials, 2026, 15
DOI: 10.1002/adhm.202503186

Systematic Development in Medical by Using 3D Printing Technology: A Brief Review

Lalit Kumar, Abid Haleem and Mohd. Javaid

J. Ind. Intg. Mgmt., 2025, 10, 363
DOI: 10.1142/S2424862222310017

Hydroxyethyl Cellulose As a Rheological Additive for Tuning the Extrusion Printability and Scaffold Properties

Xiaorui Li, Quanfeng Deng, Shuai Wang, Qi Li, Weijie Zhao, Bingcheng Lin, Yong Luo and Xiuli Zhang

3D Printing and Additive Manufacturing, 2021, 8, 87
DOI: 10.1089/3dp.2020.0167

Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting

Scott A. Wilson, Lauren M. Cross, Charles W. Peak and Akhilesh K. Gaharwar

ACS Appl. Mater. Interfaces, 2017, 9, 43449
DOI: 10.1021/acsami.7b13602

Influence of ionic crosslinkers (Ca2+/Ba2+/Zn2+) on the mechanical and biological properties of 3D Bioplotted Hydrogel Scaffolds

Md. Sarker, Mohammad Izadifar, David Schreyer and Xiongbiao Chen

Journal of Biomaterials Science, Polymer Edition, 2018, 29, 1126
DOI: 10.1080/09205063.2018.1433420

3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding

Huijun Li, Yu Jun Tan, Kah Fai Leong and Lin Li

ACS Appl. Mater. Interfaces, 2017, 9, 20086
DOI: 10.1021/acsami.7b04216

3D Printed Sugar‐Sensing Hydrogels

Danielle Bruen, Colm Delaney, Johnson Chung, Kalani Ruberu, Gordon G. Wallace, Dermot Diamond and Larisa Florea

Macromol. Rapid Commun., 2020, 41
DOI: 10.1002/marc.201900610

Gallol containing adhesive polymers

Sundol Kim, Biswajit Saha, Jacob Boykin and Hoyong Chung

Journal of Macromolecular Science, Part A, 2022, 59, 625
DOI: 10.1080/10601325.2022.2100790

Biofabrication for osteochondral tissue regeneration: bioink printability requirements

Saba Abdulghani and Pedro G. Morouço

J Mater Sci: Mater Med, 2019, 30
DOI: 10.1007/s10856-019-6218-x

In vitro models of muscle spindles: From traditional methods to 3D bioprinting strategies

Yuannan Kang, Deepak M. Kalaskar and Darren J. Player

J Tissue Eng, 2025, 16
DOI: 10.1177/20417314251343388

Making Polyol Gummies by 3D Printing: Effect of Polyols on 3D Printing Characteristics

Hao Le, Xiaorui Wang, Yabo Wei, Yunfeng Zhao, Jian Zhang and Lianfu Zhang

Foods, 2022, 11, 874
DOI: 10.3390/foods11060874

Materials and manufacturing perspectives in engineering heart valves: a review

F. Oveissi, S. Naficy, A. Lee, D.S. Winlaw and F. Dehghani

Materials Today Bio, 2020, 5, 100038
DOI: 10.1016/j.mtbio.2019.100038

Scaffolding Strategies for Tissue Engineering and Regenerative Medicine Applications

Sandra Pina, Viviana P. Ribeiro, Catarina F. Marques, F. Raquel Maia, Tiago H. Silva, Rui L. Reis and J. Miguel Oliveira

Materials, 2019, 12, 1824
DOI: 10.3390/ma12111824

Hydrogel-Based Bioinks for Coaxial and Triaxial Bioprinting: A Review of Material Properties, Printing Techniques, and Applications

Alma Tamunonengiofori Banigo, Laura Nauta, Bram Zoetebier and Marcel Karperien

Polymers, 2025, 17, 917
DOI: 10.3390/polym17070917

Effect of Calcium Sulphate Pre-crosslinking on Rheological Parameters of Alginate Based Bio-Inks and on Human Corneal Stromal Fibroblast Survival in 3D Bio-Printed Constructs

Anastassia Kostenko, Stephen Swioklo and Che J. Connon

Front. Mech. Eng., 2022, 8
DOI: 10.3389/fmech.2022.867685

Alginate-gelatin bioink for bioprinting of hela spheroids in alginate-gelatin hexagon shaped scaffolds

Sheril Amira Othman, Chin Fhong Soon, Nyuk Ling Ma, Kian Sek Tee, Gim Pao Lim, Marlia Morsin, Mohd Khairul Ahmad, Alyaa Idrees Abdulmaged and Sok Ching Cheong

Polym. Bull., 2021, 78, 6115
DOI: 10.1007/s00289-020-03421-y

Rheological analysis of bio-ink for 3D bio-printing processes

Md Ahasan Habib and Bashir Khoda

Journal of Manufacturing Processes, 2022, 76, 708
DOI: 10.1016/j.jmapro.2022.02.048

Biodegradable Polymers for Biomedical Additive Manufacturing

Dario Puppi and Federica Chiellini

Applied Materials Today, 2020, 20, 100700
DOI: 10.1016/j.apmt.2020.100700

Three-Dimensional Bioprinting: Toward the Era of Manufacturing Human Organs as Spare Parts for Healthcare and Medicine

Tanveer Ahmad Mir and Makoto Nakamura

Tissue Engineering Part B: Reviews, 2017, 23, 245
DOI: 10.1089/ten.teb.2016.0398

Classification of the printability of selected food for 3D printing: Development of an assessment method using hydrocolloids as reference material

Hyun Woo Kim, Hojae Bae and Hyun Jin Park

Journal of Food Engineering, 2017, 215, 23
DOI: 10.1016/j.jfoodeng.2017.07.017

Rheological properties of gelatine hydrogels affected by flow- and horizontally-induced cooling rates during 3D cryo-printing

Vanja Kokol, Yasir Beeran Pottathara, Mohor Mihelčič and Lidija Slemenik Perše

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 616, 126356
DOI: 10.1016/j.colsurfa.2021.126356

3D Coaxial Printing Tough and Elastic Hydrogels for Tissue Engineering Using a Catechol Functionalized Ink System

Ying Zhou, Zhilian Yue, Zhi Chen and Gordon Wallace

Adv Healthcare Materials, 2020, 9
DOI: 10.1002/adhm.202001342

AI-powered printability evaluation framework for 3D bioprinting using Hausdorff distance metrics

Colin Zhang, Kelum Chamara Manoj Lakmal Elvitigala and Shinji Sakai

Biofabrication, 2026, 18, 015015
DOI: 10.1088/1758-5090/ae288c

Ultrasensitive Wearable Strain Sensors of 3D Printing Tough and Conductive Hydrogels

Jilong Wang, Yan Liu, Siheng Su, Junhua Wei, Syed Rahman, Fuda Ning, Gordon Christopher, Weilong Cong and Jingjing Qiu

Polymers, 2019, 11, 1873
DOI: 10.3390/polym11111873

Silk Fibroin-Enriched Bioink Promotes Cell Proliferation in 3D-Bioprinted Constructs

Sara Lipari, Pasquale Sacco, Eleonora Marsich and Ivan Donati

Gels, 2024, 10, 469
DOI: 10.3390/gels10070469

Patient‐Specific Bone Particles Bioprinting for Bone Tissue Engineering

Greeshma Ratheesh, Cedryck Vaquette and Yin Xiao

Adv Healthcare Materials, 2020, 9
DOI: 10.1002/adhm.202001323

Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels

Raquel V. Barrulas and Marta C. Corvo

Gels, 2023, 9, 986
DOI: 10.3390/gels9120986

Promoting endogenous repair of skeletal muscle using regenerative biomaterials

Miranda M. Carleton and Michael V. Sefton

J Biomedical Materials Res, 2021, 109, 2720
DOI: 10.1002/jbm.a.37239

Error correction based on computer vision method in extrusion-based bioprinting

Changxi Liu, Chengliang Yang, Jia Liu, Yujin Tang, Zhengjie Lin, Long Li, Hai Liang, Weijie Lu and Liqiang Wang

Materials Today: Proceedings, 2022, 70, 328
DOI: 10.1016/j.matpr.2022.09.246

Bone-targeted lipoplex-loaded three-dimensional bioprinting bilayer scaffold enhanced bone regeneration

Woo-Jin Kim, Jeong-Hyun Ryu, Ji Won Kim, Ki-Tae Kim, Hye-Rim Shin, Heein Yoon, Hyun-Mo Ryoo and Young-Dan Cho

Regenerative Biomaterials, 2024, 11
DOI: 10.1093/rb/rbae055

Functional Biomolecule Delivery Systems and Bioengineering in Cartilage Regeneration

Marta A. Szychlinska, Ugo D'Amora, Silvia Ravalli, Luigi Ambrosio, Michelino Di Rosa and Giuseppe Musumeci

CPB, 2019, 20, 32
DOI: 10.2174/1389201020666190206202048

Cell-Laden Nanocellulose/Chitosan-Based Bioinks for 3D Bioprinting and Enhanced Osteogenic Cell Differentiation

Panita Maturavongsadit, Lokesh Karthik Narayanan, Parth Chansoria, Rohan Shirwaiker and S. Rahima Benhabbour

ACS Appl. Bio Mater., 2021, 4, 2342
DOI: 10.1021/acsabm.0c01108

Scaffold‐Free Extrusion‐Based 3D Bioprinting of Cornea Constructs Using a Decellularized Corneal Extracellular Matrix Based Bioink and Human Placenta‐Derived Mesenchymal Stem Cells

Hugo A. Marin‐Tapia, Lorena Romero‐Salazar, Miguel Mayorga‐Rojas and Juan Carlos Arteaga‐Arcos

Macromolecular Bioscience, 2025, 25
DOI: 10.1002/mabi.202500276

Bioprinting and biomaterials for dental alveolar tissue regeneration

Serge Ostrovidov, Murugan Ramalingam, Hojae Bae, Gorka Orive, Toshinori Fujie, Xuetao Shi and Hirokazu Kaji

Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.991821

Bioinks—materials used in printing cells in designed 3D forms

Dilara Goksu Tamay and Nesrin Hasirci

Journal of Biomaterials Science, Polymer Edition, 2021, 32, 1072
DOI: 10.1080/09205063.2021.1892470

Advances in 3D bioprinting for regenerative medicine applications

Konstantinos Loukelis, Nikos Koutsomarkos, Antonios G Mikos and Maria Chatzinikolaidou

Regenerative Biomaterials, 2024, 11
DOI: 10.1093/rb/rbae033

Innovative bioinks for 3D bioprinting: Exploring technological potential and regulatory challenges

Vidhi Mathur, Prachi Agarwal, Meghana Kasturi, Varadharajan Srinivasan, Raviraja N Seetharam and Kirthanashri S Vasanthan

J Tissue Eng, 2025, 16
DOI: 10.1177/20417314241308022

Directing the Self-assembly of Tumour Spheroids by Bioprinting Cellular Heterogeneous Models within Alginate/Gelatin Hydrogels

Tao Jiang, Jose G. Munguia-Lopez, Salvador Flores-Torres, Joel Grant, Sanahan Vijayakumar, Antonio De Leon-Rodriguez and Joseph M. Kinsella

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-04691-9

A predictive rheological framework to define printability of thermo-sensitive bioinks using non-temperature-controlled bioprinters

Inês Anjos, Tânia Vieira, Luana Ventura, Taslima Aktar, Jorge Carvalho Silva, Bárbara B. Mendes, João Conde, Luis Felipe Bolaños, Susete Fernandes, Catarina Leal, João Paulo Borges and David Limón

Polymer Testing, 2026, 157, 109138
DOI: 10.1016/j.polymertesting.2026.109138

The current state of the art in gellan-based printing inks in tissue engineering

Alexandra I. Cernencu and Mariana Ioniță

Carbohydrate Polymers, 2023, 309, 120676
DOI: 10.1016/j.carbpol.2023.120676

Advances in Gelatin Bioinks to Optimize Bioprinted Cell Functions

Saad Asim, Tanveer A. Tabish, Usman Liaqat, Ibrahim T. Ozbolat and Muhammad Rizwan

Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202203148

Triblock Copolymer Bioinks in Hydrogel Three-Dimensional Printing for Regenerative Medicine: A Focus on Pluronic F127

Rehab N. Shamma, Rabab H. Sayed, Henning Madry, Nesrine S. EL Sayed and Magali Cucchiarini

Tissue Engineering Part B: Reviews, 2022, 28, 451
DOI: 10.1089/ten.teb.2021.0026

Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells

Qi Gu, Eva Tomaskovic‐Crook, Rodrigo Lozano, Yu Chen, Robert M. Kapsa, Qi Zhou, Gordon G. Wallace and Jeremy M. Crook

Adv Healthcare Materials, 2016, 5, 1429
DOI: 10.1002/adhm.201600095

3D bioprinting: current status and trends—a guide to the literature and industrial practice

Silvia Santoni, Simone G. Gugliandolo, Mattia Sponchioni, Davide Moscatelli and Bianca M. Colosimo

Bio-des. Manuf., 2022, 5, 14
DOI: 10.1007/s42242-021-00165-0

Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review

Aurora C. Hernández-González, Lucía Téllez-Jurado and Luis M. Rodríguez-Lorenzo

Carbohydrate Polymers, 2020, 229, 115514
DOI: 10.1016/j.carbpol.2019.115514

Designed and fabrication of triple-layered vascular scaffold with microchannels

Qingxi Hu, Zhipeng Shen, Haiguang Zhang, Suihong Liu, Rui Feng, Jiaxuan Feng and Murugan Ramalingam

Journal of Biomaterials Science, Polymer Edition, 2021, 32, 714
DOI: 10.1080/09205063.2020.1864083

Bioelectrical Analysis of Various Cancer Cell Types Immobilized in 3D Matrix and Cultured in 3D-Printed Well

Georgia Paivana, Sophie Mavrikou, Grigoris Kaltsas and Spyridon Kintzios

Biosensors, 2019, 9, 136
DOI: 10.3390/bios9040136

Cell-laden 3D bioprinting hydrogel matrix depending on different compositions for soft tissue engineering: Characterization and evaluation

Jisun Park, Sang Jin Lee, Solchan Chung, Jun Hee Lee, Wan Doo Kim, Jae Young Lee and Su A Park

Materials Science and Engineering: C, 2017, 71, 678
DOI: 10.1016/j.msec.2016.10.069

Alginate-honey bioinks with improved cell responses for applications as bioprinted tissue engineered constructs

Sudipto Datta, Ripon Sarkar, Veena Vyas, Sumant Bhutoria, Ananya Barui, Amit Roy Chowdhury and Pallab Datta

J. Mater. Res., 2018, 33, 2029
DOI: 10.1557/jmr.2018.202

Development of hybrid polyvinylpyrrolidone/carboxymethyl cellulose/collagen incorporated oregano scaffolds via direct ink write printing for potential wound healing applications

Syed Muneeb Haider Gillani, Awab Mughal, Raja Aqib Akmal Khan, Muhammad Haseeb Nawaz, Zohaib Razzaq, Muhammad Sameet Ismat, Rabia Hussain, Abdul Wadood, Sheraz Ahmed, Badar Minhas, Mohamed Abbas, Thafasalijyas Vayalpurayil and Muhammad Atiq Ur Rehman

International Journal of Biological Macromolecules, 2024, 278, 134528
DOI: 10.1016/j.ijbiomac.2024.134528

Phenolated alginate-collagen hydrogel induced chondrogenic capacity of human amniotic mesenchymal stem cells

Sepideh Saghati, Reza Rahbarghazi, Ali Baradar Khoshfetrat, Keyvan Moharamzadeh, Hamid Tayefi Nasrabadi and Leila Roshangar

J Biomater Appl, 2021, 36, 789
DOI: 10.1177/08853282211021692

iPSC-neural crest derived cells embedded in 3D printable bio-ink promote cranial bone defect repair

Juliane D. Glaeser, Xianchao Bao, Giselle Kaneda, Pablo Avalos, Phillip Behrens, Khosrowdad Salehi, Xiaoyu Da, Angel Chen, Chloe Castaneda, Pawel Nakielski, Wensen Jiang, Wafa Tawackoli and Dmitriy Sheyn

Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-22502-8

Advancements in 3D skin bioprinting: processes, bioinks, applications and sensor integration

I Deniz Derman, Taino Rivera, Laura Garriga Cerda, Yogendra Pratap Singh, Shweta Saini, Hasan Erbil Abaci and Ibrahim T Ozbolat

Int. J. Extrem. Manuf., 2025, 7, 012009
DOI: 10.1088/2631-7990/ad878c

Biomimetic Approach for Enhanced Mechanical Properties and Stability of Self-Mineralized Calcium Phosphate Dibasic–Sodium Alginate–Gelatine Hydrogel as Bone Replacement and Structural Building Material

Alberto T. Estevez and Yomna K. Abdallah

Processes, 2024, 12, 944
DOI: 10.3390/pr12050944

Message in a Scaffold: Natural Biomaterials for Three-Dimensional (3D) Bioprinting of Human Brain Organoids

Pierre Layrolle, Pierre Payoux and Stéphane Chavanas

Biomolecules, 2022, 13, 25
DOI: 10.3390/biom13010025

3D bioprinting and craniofacial regeneration

Ruby Dwivedi and Divya Mehrotra

Journal of Oral Biology and Craniofacial Research, 2020, 10, 650
DOI: 10.1016/j.jobcr.2020.08.011

3D Human Skin Bioprinting: A View from the Bio Side

Diego Velasco, Cristina Quílez, Marta Garcia, Juan F del Cañizo and Jose L Jorcano

J. 3D Print. Med., 2018, 2, 141
DOI: 10.2217/3dp-2018-0008

Extrusion 3D bioprinting of functional self-supporting neural constructs using a photoclickable gelatin bioink

Yue Yao, Andrey Molotnikov, Helena C Parkington, Laurence Meagher and John S Forsythe

Biofabrication, 2022, 14, 035014
DOI: 10.1088/1758-5090/ac6e87

3D printing and chitosan complexation of ulvan/poly(vinyl alcohol) hydrogels for wound healing

Simona Braccini, Sangram Keshari Samal, Gianni Pecorini, Santosh Kumar Behera, Antonella Manariti and Dario Puppi

Applied Materials Today, 2026, 50, 103217
DOI: 10.1016/j.apmt.2026.103217

Real-time in-situ ultrasound monitoring of soft hydrogel 3D printing with subwavelength resolution

Teng Yang, Yuqi Jin, Lee Miller Smith, Narendra B. Dahotre and Arup Neogi

Commun Eng, 2024, 3
DOI: 10.1038/s44172-024-00318-w

Printability of Bioinks: A Consolidated Definition for Additive Manufacturing

Matheus A. A. Resende, Eliana C. S. Rigo and Andrés Vercik

ACS Omega, 2025
DOI: 10.1021/acsomega.5c00727

Printability in extrusion bioprinting

Zhouquan Fu, Saman Naghieh, Cancan Xu, Chengjin Wang, Wei Sun and Xiongbiao Chen

Biofabrication, 2021, 13, 033001
DOI: 10.1088/1758-5090/abe7ab

Recombinant spider silk-based bioinks

Elise DeSimone, Kristin Schacht, Alexandra Pellert and Thomas Scheibel

Biofabrication, 2017, 9, 044104
DOI: 10.1088/1758-5090/aa90db

3D graphene-containing structures for tissue engineering

J. Li, X. Liu, J.M. Crook and G.G. Wallace

Materials Today Chemistry, 2019, 14, 100199
DOI: 10.1016/j.mtchem.2019.100199

Plant-Derived Biomaterials: A Review of 3D Bioprinting and Biomedical Applications

Thomas H. Jovic, Garikai Kungwengwe, Adam C. Mills and Iain S. Whitaker

Front. Mech. Eng., 2019, 5
DOI: 10.3389/fmech.2019.00019

Recent Trends in Three-Dimensional Bioinks Based on Alginate for Biomedical Applications

Farnoosh Pahlevanzadeh, Hamidreza Mokhtari, Hamid Reza Bakhsheshi-Rad, Rahmatollah Emadi, Mahshid Kharaziha, Ali Valiani, S. Ali Poursamar, Ahmad Fauzi Ismail, Seeram RamaKrishna and Filippo Berto

Materials, 2020, 13, 3980
DOI: 10.3390/ma13183980

Optimization of 3D printing and in vitro characterization of alginate/gelatin lattice and angular scaffolds for potential cardiac tissue engineering

Farinaz Ketabat, Titouan Maris, Xiaoman Duan, Zahra Yazdanpanah, Michael E. Kelly, Ildiko Badea and Xiongbiao Chen

Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.1161804

Algal polysaccharides for 3D printing: A review

Shovon Mandal, Gurpreet Kaur Nagi, Alina A. Corcoran, Ruchi Agrawal, Mukul Dubey and Ryan W. Hunt

Carbohydrate Polymers, 2023, 300, 120267
DOI: 10.1016/j.carbpol.2022.120267

Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus

Johanna Berg, Thomas Hiller, Maya S. Kissner, Taimoor H. Qazi, Georg N. Duda, Andreas C. Hocke, Stefan Hippenstiel, Laura Elomaa, Marie Weinhart, Christoph Fahrenson and Jens Kurreck

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-31880-x

Storable Cell-Laden Alginate Based Bioinks for 3D Biofabrication

Anastassia Kostenko, Che J. Connon and Stephen Swioklo

Bioengineering, 2022, 10, 23
DOI: 10.3390/bioengineering10010023

Study of extrudability and standoff distance effect during nanoclay-enabled direct printing

Yifei Jin, Danyang Zhao and Yong Huang

Bio-des. Manuf., 2018, 1, 123
DOI: 10.1007/s42242-018-0009-y

State-of-art affordable bioprinters: A guide for the DiY community

Carlos Ezio Garciamendez-Mijares, Prajwal Agrawal, Germán García Martínez, Ernesto Cervantes Juarez and Yu Shrike Zhang

Applied Physics Reviews, 2021, 8
DOI: 10.1063/5.0047818

Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels

Amin GhavamiNejad, Nureddin Ashammakhi, Xiao Yu Wu and Ali Khademhosseini

Small, 2020, 16
DOI: 10.1002/smll.202002931

A virtual framework for simulation of complex viscoelastic flows

Simon Ingelsten, Johan Göhl, Andreas Mark and Fredrik Edelvik

Procedia CIRP, 2018, 72, 392
DOI: 10.1016/j.procir.2018.03.226

Designing of gradient scaffolds and their applications in tissue regeneration

Ananya Pattnaik, A. Swaroop Sanket, Sanghamitra Pradhan, Rajashree Sahoo, Sudiptee Das, Swarnaprbha Pany, Timothy E.L. Douglas, Rambabu Dandela, Qiang Liu, Jaykumar Rajadas, Sanghamitra Pati, Stefaan C. De Smedt, Kevin Braeckmans and Sangram Keshari Samal

Biomaterials, 2023, 296, 122078
DOI: 10.1016/j.biomaterials.2023.122078

Pre-crosslinked ozonized alginate-agar hydrogel with anthocyanin for advanced 3D printing

Camila Yamashita, Izabel Cristina Freitas Moraes, Charles Windson Isidoro Haminiuk, Loic Hugues Gilles Hilliou, Ciro Cesar Zanini Branco, Arthur Torres Negreiros, Natalie Stephanie Sawada Nunes and Ivanise Guilherme Branco

Materials Today Communications, 2026, 50, 114576
DOI: 10.1016/j.mtcomm.2025.114576

Recent Progress in 3D Printing of Elastic and High-Strength Hydrogels for the Treatment of Osteochondral and Cartilage Diseases

Wenli Dai, Muyang Sun, Xi Leng, Xiaoqing Hu and Yingfang Ao

Front. Bioeng. Biotechnol., 2020, 8
DOI: 10.3389/fbioe.2020.604814

3D-printability of aqueous poly(ethylene oxide) gels

Laura Viidik, Dagmar Seera, Osmo Antikainen, Karin Kogermann, Jyrki Heinämäki and Ivo Laidmäe

European Polymer Journal, 2019, 120, 109206
DOI: 10.1016/j.eurpolymj.2019.08.033

Chestnut-Inspired Hollow Hydroxyapatite 3D Printing Scaffolds Accelerate Bone Regeneration by Recruiting Calcium Ions and Regulating Inflammation

Peng Wei, Jingyu Zhou, Shilang Xiong, Feng Yi, Kejun Xu, Min Liu, Hanrui Xi, Zhigang Zhou, Zhiqiang Qiu, Hantian Liu, Jianhua Zeng, Yayun Liu, Peng Qiu, Jianguo Zhou, Shiwei Liu, Zhisheng Long, Jingtang Li and Long Xiong

ACS Appl. Mater. Interfaces, 2024, 16, 9768
DOI: 10.1021/acsami.3c17087

Towards the Experimentally-Informed In Silico Nozzle Design Optimization for Extrusion-Based Bioprinting of Shear-Thinning Hydrogels

Esther Reina-Romo, Sourav Mandal, Paulo Amorim, Veerle Bloemen, Eleonora Ferraris and Liesbet Geris

Front. Bioeng. Biotechnol., 2021, 9
DOI: 10.3389/fbioe.2021.701778

The rheology of direct and suspended extrusion bioprinting

Megan E. Cooke and Derek H. Rosenzweig

APL Bioengineering, 2021, 5
DOI: 10.1063/5.0031475

Printable gelatin, alginate and boron nitride nanotubes hydrogel-based ink for 3D bioprinting and tissue engineering applications

Akesh B. Kakarla, Ing Kong, Ilona Turek, Cin Kong and Helen Irving

Materials & Design, 2022, 213, 110362
DOI: 10.1016/j.matdes.2021.110362

In situhandheld three‐dimensional bioprinting for cartilage regeneration

Claudia Di Bella, Serena Duchi, Cathal D. O'Connell, Romane Blanchard, Cheryl Augustine, Zhilian Yue, Fletcher Thompson, Christopher Richards, Stephen Beirne, Carmine Onofrillo, Sebastien H. Bauquier, Stewart D. Ryan, Peter Pivonka, Gordon G. Wallace and Peter F. Choong

J Tissue Eng Regen Med, 2018, 12, 611
DOI: 10.1002/term.2476

Challenges and Innovative Strategies in 3D Printing of Natural Biomolecular Hydrogels

Jiaqi Qiu, Shuo Ma and Xue Qu

Nano Select, 2025, 6
DOI: 10.1002/nano.202400149

The Application of Ultrasound in 3D Bio-Printing

Yufeng Zhou

Molecules, 2016, 21, 590
DOI: 10.3390/molecules21050590

Bioprinting of Cells, Organoids and Organs-on-a-Chip Together with Hydrogels Improves Structural and Mechanical Cues

Claudia Tanja Mierke

Cells, 2024, 13, 1638
DOI: 10.3390/cells13191638

3D printing of human ear pinna using cartilage specific ink

Nilesh Bhamare, Kishor Tardalkar, Pratima Parulekar, Archana Khadilkar and Meghnad Joshi

Biomed. Mater., 2021, 16, 055008
DOI: 10.1088/1748-605X/ac15b0

Printability of 3D Printed Hydrogel Scaffolds: Influence of Hydrogel Composition and Printing Parameters

Saman Naghieh, MD Sarker, N. K. Sharma, Zohra Barhoumi and Xiongbiao Chen

Applied Sciences, 2019, 10, 292
DOI: 10.3390/app10010292

Stem Cells and Extrusion 3D Printing for Hyaline Cartilage Engineering

Océane Messaoudi, Christel Henrionnet, Kevin Bourge, Damien Loeuille, Pierre Gillet and Astrid Pinzano

Cells, 2020, 10, 2
DOI: 10.3390/cells10010002

Characterization of Alginate–Gelatin–Cholesteryl Ester Liquid Crystals Bioinks for Extrusion Bioprinting of Tissue Engineering Scaffolds

Alyaa Idrees Abdulmaged, Chin Fhong Soon, Balkis A. Talip, Siti Adibah Ahmad Zamhuri, Salama A. Mostafa and Wenbin Zhou

Polymers, 2022, 14, 1021
DOI: 10.3390/polym14051021

Polysaccharide hydrogel based 3D printed tumor models for chemotherapeutic drug screening

Aragaw Gebeyehu, Sunil Kumar Surapaneni, John Huang, Arindam Mondal, Vivian Ziwen Wang, Nana Fatima Haruna, Arvind Bagde, Peggy Arthur, Shallu Kutlehria, Nil Patel, Arun K. Rishi and Mandip Singh

Sci Rep, 2021, 11
DOI: 10.1038/s41598-020-79325-8

Three-Dimensional-Printable Thermo/Photo-Cross-Linked Methacrylated Chitosan–Gelatin Hydrogel Composites for Tissue Engineering

Amarachi Rosemary Osi, Hua Zhang, Jing Chen, Yang Zhou, Rong Wang, Jun Fu, Peter Müller-Buschbaum and Qi Zhong

ACS Appl. Mater. Interfaces, 2021, 13, 22902
DOI: 10.1021/acsami.1c01321

Viscous Fingering as a Rapid 3D Pattering Technique for Engineering Cell‐Laden Vascular‐Like Constructs

Min‐Chun Tsai, Shih‐Yen Wei, Ling Fang and Ying‐Chieh Chen

Adv Healthcare Materials, 2022, 11
DOI: 10.1002/adhm.202101392

Tuning Shear Thinning Factors of 3D Bio-Printable Hydrogels Using Short Fiber

Slesha Tuladhar, Scott Clark and Ahasan Habib

Materials, 2023, 16, 572
DOI: 10.3390/ma16020572

Freeform 3D printing of soft matters: recent advances in technology for biomedical engineering

Shengyang Chen, Wen See Tan, Muhammad Aidil Bin Juhari, Qian Shi, Xue Shirley Cheng, Wai Lee Chan and Juha Song

Biomed. Eng. Lett., 2020, 10, 453
DOI: 10.1007/s13534-020-00171-8

Printability and Shape Fidelity of Bioinks in 3D Bioprinting

Andrea Schwab, Riccardo Levato, Matteo D’Este, Susanna Piluso, David Eglin and Jos Malda

Chem. Rev., 2020, 120, 11028
DOI: 10.1021/acs.chemrev.0c00084

Binary Polymeric System Based on Fish Collagen and Poloxamer 407: Mechanical and Rheological Analysis for Pharmaceutical and Biomedical Applications

Denise Tiemi Uchida, Douglas Shiguero Takano Ogassawara and Marcos Luciano Bruschi

ACS Omega, 2025, 10, 53927
DOI: 10.1021/acsomega.5c04058

3D bioprinting of photo‐crosslinkable silk methacrylate (SilMA)‐polyethylene glycol diacrylate (PEGDA) bioink for cartilage tissue engineering

Ashutosh Bandyopadhyay, Biman B. Mandal and Nandana Bhardwaj

J Biomedical Materials Res, 2022, 110, 884
DOI: 10.1002/jbm.a.37336

Applications of 3D Bioprinting in Oral and Maxillofacial Surgery: An Insight

Priyanka Sharma, Himani Dadwal and Gurinder Bir Singh Thind

J. Maxillofac. Oral Surg., 2024, 23, 1601
DOI: 10.1007/s12663-023-02063-7

Keratin 3D Printing: Sustainable Biomaterials for Regenerative Medicine and Biomanufacturing

Mina Rajabi, Xiaoxuan Deng, Jithendra Ratnayake and Maree Gould

Tissue Engineering Part A, 2026
DOI: 10.1177/19373341251398721

3D bioprinting modified autologous matrix-induced chondrogenesis(AMIC) technique for repair of cartilage defects

Yang Zhou, Ran Qin, Tong Chen, Kaibin Zhang and Jianchao Gui

Materials & Design, 2021, 203, 109621
DOI: 10.1016/j.matdes.2021.109621

Submerged and non-submerged 3D bioprinting approaches for the fabrication of complex structures with the hydrogel pair GelMA and alginate/methylcellulose

Huijun Li, Yu Jun Tan, Raj Kiran, Shu Beng Tor and Kun Zhou

Additive Manufacturing, 2021, 37, 101640
DOI: 10.1016/j.addma.2020.101640

3D Printed Hydrogel-Based Sensors for Quantifying UV Exposure

Abraham Samuel Finny, Cindy Jiang and Silvana Andreescu

ACS Appl. Mater. Interfaces, 2020, 12, 43911
DOI: 10.1021/acsami.0c12086

Protein-Based 3D Biofabrication of Biomaterials

Mahta Mirzaei, Oseweuba Valentine Okoro, Lei Nie, Denise Freitas Siqueira Petri and Amin Shavandi

Bioengineering, 2021, 8, 48
DOI: 10.3390/bioengineering8040048

Biomaterials Based on Marine Resources for 3D Bioprinting Applications

Yi Zhang, Dezhi Zhou, Jianwei Chen, Xiuxiu Zhang, Xinda Li, Wenxiang Zhao and Tao Xu

Marine Drugs, 2019, 17, 555
DOI: 10.3390/md17100555

3D printed biomimetic epithelium/stroma bilayer hydrogel implant for corneal regeneration

Binbin He, Jie Wang, Mengtian Xie, Miaoyi Xu, Yahan Zhang, Huijie Hao, Xiaoli Xing, William Lu, Quanhong Han and Wenguang Liu

Bioactive Materials, 2022, 17, 234
DOI: 10.1016/j.bioactmat.2022.01.034

Liquid-phase 3D bioprinting of gelatin alginate hydrogels: influence of printing parameters on hydrogel line width and layer height

Maha Alruwaili, Jose A. Lopez, Kevin McCarthy, Emmanuel G. Reynaud and Brian J. Rodriguez

Bio-des. Manuf., 2019, 2, 172
DOI: 10.1007/s42242-019-00043-w

Bioprinting and Preliminary Testing of Highly Reproducible Novel Bioink for Potential Skin Regeneration

Forough Hafezi, Susan Shorter, Atabak Ghanizadeh Tabriz, Andrew Hurt, Victoria Elmes, Joshua Boateng and Dennis Douroumis

Pharmaceutics, 2020, 12, 550
DOI: 10.3390/pharmaceutics12060550

Three-Dimensional Printable Hydrogel Using a Hyaluronic Acid/Sodium Alginate Bio-Ink

Su Jeong Lee, Ji Min Seok, Jun Hee Lee, Jaejong Lee, Wan Doo Kim and Su A Park

Polymers, 2021, 13, 794
DOI: 10.3390/polym13050794

A Versatile Open-Source Printhead for Low-Cost 3D Microextrusion-Based Bioprinting

Andres Sanz-Garcia, Enrique Sodupe-Ortega, Alpha Pernía-Espinoza, Tatsuya Shimizu and Carmen Escobedo-Lucea

Polymers, 2020, 12, 2346
DOI: 10.3390/polym12102346

3D printed agar/ calcium alginate hydrogels with high shape fidelity and tailorable mechanical properties

Jilong Wang, Yan Liu, Xintian Zhang, Syed Ehsanur Rahman, Siheng Su, Junhua Wei, Fuda Ning, Zhonglue Hu, Raul Martínez-Zaguilán, Souad R. Sennoune, Weilong Cong, Gordon Christopher, Kun Zhang and Jingjing Qiu

Polymer, 2021, 214, 123238
DOI: 10.1016/j.polymer.2020.123238

Reviewing the literature of 3D printing of bones and cartilage: Evidence and practice

Arunkumar Subramanian, Jaishree Mohanbabu, Trisha Srinivasan, Tamilanban T, Vetriselvan Subramaniyan, Manimaran V, Mahendran Sekar and Ling Shing Wong

Annals of 3D Printed Medicine, 2024, 16, 100180
DOI: 10.1016/j.stlm.2024.100180

An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects

Željka P. Kačarević, Patrick M. Rider, Said Alkildani, Sujith Retnasingh, Ralf Smeets, Ole Jung, Zrinka Ivanišević and Mike Barbeck

Materials, 2018, 11, 2199
DOI: 10.3390/ma11112199

3D printing of biomaterials for biomedical applications: a review

S. S. Bhatti and Jasvinder Singh

Int J Interact Des Manuf, 2023
DOI: 10.1007/s12008-023-01525-z

‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art

Stuart Kyle, Zita M. Jessop, Ayesha Al‐Sabah and Iain S. Whitaker

Adv Healthcare Materials, 2017, 6
DOI: 10.1002/adhm.201700264

Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability

Naomi Paxton, Willi Smolan, Thomas Böck, Ferry Melchels, Jürgen Groll and Tomasz Jungst

Biofabrication, 2017, 9, 044107
DOI: 10.1088/1758-5090/aa8dd8

Borate bioactive glass enhances 3D bioprinting precision and biocompatibility on a sodium alginate platform via Ca2+ controlled self-solidification

Zeyong Guo, Jian Han, Zehua Li, Yuxuan Sun, Ruiguo Chen, Sajid ur Rehman, Haining Xia, Jing Zhang, Kun Ma and Junfeng Wang

International Journal of Biological Macromolecules, 2024, 277, 134338
DOI: 10.1016/j.ijbiomac.2024.134338

Fabrication of Porous Spherical Beads from Corn Starch by Using a 3D Food Printing System

Safoura Ahmadzadeh and Ali Ubeyitogullari

Foods, 2022, 11, 913
DOI: 10.3390/foods11070913

Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication

Tao Jiang, Jose G. Munguia-Lopez, Salvador Flores-Torres, Jacqueline Kort-Mascort and Joseph M. Kinsella

Applied Physics Reviews, 2019, 6
DOI: 10.1063/1.5059393

Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics

Jana Stepanovska, Monika Supova, Karel Hanzalek, Antonin Broz and Roman Matejka

Biomedicines, 2021, 9, 1137
DOI: 10.3390/biomedicines9091137

Hydrogel composition and mechanical stiffness of 3D bioprinted cell-loaded scaffolds promote cartilage regeneration

Ge Liu, Xiaowei Wei, Junlei Li, Yun Zhai, Jingrun Zhang, Ming Jin, Tianmin Guan and Dewei Zhao

Front. Mater., 2024, 11
DOI: 10.3389/fmats.2024.1501505

Improvement of cell deposition by self-absorbent capability of freeze-dried 3D-bioprinted scaffolds derived from cellulose material-alginate hydrogels

Zhongqiang Li, Alexandra Ramos, Mei-Chun Li, Zheng Li, Shradha Bhatta, Abhirami Jeyaseelan, Yanping Li, Qinglin Wu, Shaomian Yao and Jian Xu

Biomed. Phys. Eng. Express, 2020, 6, 045009
DOI: 10.1088/2057-1976/ab8fc6

Evolving Cell-Based and Cell-Free Clinical Strategies for Treating Severe Human Liver Diseases

Viviana Cernigliaro, Rossella Peluso, Beatrice Zedda, Lorenzo Silengo, Emanuela Tolosano, Rinaldo Pellicano, Fiorella Altruda and Sharmila Fagoonee

Cells, 2020, 9, 386
DOI: 10.3390/cells9020386

3D bioprinting of hydrogel‐based biomimetic microenvironments

Yongxiang Luo, Xiaoyue Wei and Peng Huang

J Biomed Mater Res, 2019, 107, 1695
DOI: 10.1002/jbm.b.34262

On the progress of 3D-printed hydrogels for tissue engineering

Rigoberto C. Advincula, John Ryan C. Dizon, Eugene B. Caldona, Robert Andrew Viers, Francis Dave C. Siacor, Reymark D. Maalihan and Alejandro H. Espera

MRS Communications, 2021, 11, 539
DOI: 10.1557/s43579-021-00069-1

3D-printed alginate/gelatin/PCL/hyaluronic acid scaffolds with metal–organic frameworks for quercetin delivery: Improving mechanical properties and cytocompatibility for cartilage tissue engineering applications

Tahoora Naseri, Mohamadreza Soltani, Samira Hosseinian, Amirmohamad Alimohamadi, Mohammad Soleimani, Amir Shamloo and Shohreh Mashayekhan

Bioprinting, 2026, 54, e00466
DOI: 10.1016/j.bprint.2026.e00466

Linking rheology and printability of a multicomponent gel system of carrageenan-xanthan-starch in extrusion based additive manufacturing

Zhenbin Liu, Bhesh Bhandari, Sangeeta Prakash, Sylvester Mantihal and Min Zhang

Food Hydrocolloids, 2019, 87, 413
DOI: 10.1016/j.foodhyd.2018.08.026

Extrusion-based sustainable 3D bioprinting of meat & its analogues: A review

Kamalnayan Tibrewal, Prajakta Dandekar and Ratnesh Jain

Bioprinting, 2023, 29, e00256
DOI: 10.1016/j.bprint.2022.e00256

3D Bioprinting Bioinks: an up-to-date overview

Aramis Moradi, Negin Khosravi , Bhekumuzi Sfundo Khanyile , Fariborz Sharifianjazi and Matin Sorkhabi

J. compos. compd., 2024, 6
DOI: 10.61186/jcc.6.3.3

Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting

Xiaohong Wang

Micromachines, 2019, 10, 814
DOI: 10.3390/mi10120814

Application of Raman spectroscopy and chemometrics in the mechanochemical synthesis of TIFSIX-3-Ni HUMs using twin screw extrusion

Ahmed Metawea, Ahmad B. Albadarin, Ozren Jovic, Nicolas Abdel Karim Aramouni, Gavin Walker and Rabah Mouras

Microporous and Mesoporous Materials, 2025, 391, 113558
DOI: 10.1016/j.micromeso.2025.113558

Driving Deployment of Bioengineered Products—An Arduous, Sometimes Tedious, Challenging, Rewarding, Most Exciting Journey That Has to Be Made!

Gordon George Wallace

Bioengineering, 2024, 11, 856
DOI: 10.3390/bioengineering11080856

Four-dimensional food printing: A revolutionary approach to next-generation foods

Aya Tayel and Ahmed Hamad

Food sci. technol. int., 2025
DOI: 10.1177/10820132251336084

Fabrication and characterization of 3D scaffolds made from blends of sodium alginate and poly(vinyl alcohol)

Ji Min Seok, Se Heang Oh, Sang Jin Lee, Jun Hee Lee, Wan Doo Kim, Sang-Hyug Park, Seung Yun Nam, Heungsoo Shin and Su A Park

Materials Today Communications, 2019, 19, 56
DOI: 10.1016/j.mtcomm.2018.09.013

Fiber-Filled Hybrid Hydrogel for Bio-Manufacturing

Ahasan Habib and Bashir Khoda

Journal of Manufacturing Science and Engineering, 2021, 143
DOI: 10.1115/1.4049479

Hydrogels for Bioprinting: A Systematic Review of Hydrogels Synthesis, Bioprinting Parameters, and Bioprinted Structures Behavior

Enrique Mancha Sánchez, J. Carlos Gómez-Blanco, Esther López Nieto, Javier G. Casado, Antonio Macías-García, María A. Díaz Díez, Juan Pablo Carrasco-Amador, Diego Torrejón Martín, Francisco Miguel Sánchez-Margallo and J. Blas Pagador

Front. Bioeng. Biotechnol., 2020, 8
DOI: 10.3389/fbioe.2020.00776

Bioink design for extrusion-based bioprinting

Tao Zhang, Wei Zhao, Zijie Xiahou, Xingwang Wang, Kunxi Zhang and Jingbo Yin

Applied Materials Today, 2021, 25, 101227
DOI: 10.1016/j.apmt.2021.101227

Synthesis of Thermoresponsive Amphiphilic Polyurethane Gel as a New Cell Printing Material near Body Temperature

Yi-Chun Tsai, Suming Li, Shiaw-Guang Hu, Wen-Chi Chang, U-Ser Jeng and Shan-hui Hsu

ACS Appl. Mater. Interfaces, 2015, 7, 27613
DOI: 10.1021/acsami.5b10697

3D bioprinting – Flow cytometry as analytical strategy for 3D cell structures

Sarah Gretzinger, Nicole Beckert, Andrew Gleadall, Cornelia Lee-Thedieck and Jürgen Hubbuch

Bioprinting, 2018, 11, e00023
DOI: 10.1016/j.BPRINT.2018.e00023

Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect

Fei Gao, Ziyang Xu, Qingfei Liang, Bo Liu, Haofei Li, Yuanhao Wu, Yinyu Zhang, Zifeng Lin, Mingming Wu, Changshun Ruan and Wenguang Liu

Adv Funct Materials, 2018, 28
DOI: 10.1002/adfm.201706644

Recent Advances in 3D Bioprinting for the Regeneration of Functional Cartilage

Ji Xiongfa, Zhu Hao, Zhao Liming and Xiao Jun

Regen. Med., 2018, 13, 73
DOI: 10.2217/rme-2017-0106

Microfluidic Devices and 3D Printing for Synthesis and Screening of Drugs and Tissue Engineering

Harrson S. Santana, Mauri S. A. Palma, Mariana G. M. Lopes, Johmar Souza, Giovanni A. S. Lima, Osvaldir P. Taranto and João Lameu Silva

Ind. Eng. Chem. Res., 2020, 59, 3794
DOI: 10.1021/acs.iecr.9b03787

Alginate-based bioink for organoid 3D bioprinting: A review

Michael Leonardo, Ekavianty Prajatelistia and Hermawan Judawisastra

Bioprinting, 2022, 28, e00246
DOI: 10.1016/j.bprint.2022.e00246

Three dimensional (bio)printing of blood vessels: from vascularized tissues to functional arteries

Shubham Makode, Satyajit Maurya, Seyed A Niknam, Evelyn Mollocana-Lara, Kiana Jaberi, Negar Faramarzi, Ali Tamayol and Mehdi Mortazavi

Biofabrication, 2024, 16, 022005
DOI: 10.1088/1758-5090/ad22ed

Dual Crosslinked Antioxidant Mixture of Poly(vinyl alcohol) and Cerium Oxide Nanoparticles as a Bioink for 3D Bioprinting

Nasera Rizwana, Namrata Maslekar, Kaushik Chatterjee, Yin Yao, Vipul Agarwal and Manasa Nune

ACS Appl. Nano Mater., 2024, 7, 18177
DOI: 10.1021/acsanm.3c02962

Responsive biomaterials for 3D bioprinting: A review

Zhouquan Fu, Liliang Ouyang, Runze Xu, Yang Yang and Wei Sun

Materials Today, 2022, 52, 112
DOI: 10.1016/j.mattod.2022.01.001

Novel Compound-Forming Technology Using Bioprinting and Electrospinning for Patterning a 3D Scaffold Construct with Multiscale Channels

Yuanshao Sun, Yuanyuan Liu, Shuai Li, Change Liu and Qingxi Hu

Micromachines, 2016, 7, 238
DOI: 10.3390/mi7120238

Current advances and future perspectives in extrusion-based bioprinting

Ibrahim T. Ozbolat and Monika Hospodiuk

Biomaterials, 2016, 76, 321
DOI: 10.1016/j.biomaterials.2015.10.076

Current progress in 3D printing for cardiovascular tissue engineering

Bobak Mosadegh, Guanglei Xiong, Simon Dunham and James K Min

Biomed. Mater., 2015, 10, 034002
DOI: 10.1088/1748-6041/10/3/034002

3D Bioprinting Using a Templated Porous Bioink

James P. K. Armstrong, Madeline Burke, Benjamin M. Carter, Sean A. Davis and Adam W. Perriman

Adv Healthcare Materials, 2016, 5, 1724
DOI: 10.1002/adhm.201600022

Modeling a Dynamic Printability Window on Polysaccharide Blend Inks for Extrusion Bioprinting

Francesca Perin, Eugenia Spessot, Anna Famà, Alessio Bucciarelli, Emanuela Callone, Carlos Mota, Antonella Motta and Devid Maniglio

ACS Biomater. Sci. Eng., 2023, 9, 1320
DOI: 10.1021/acsbiomaterials.2c01143

Printability and Cell Viability in Extrusion-Based Bioprinting from Experimental, Computational, and Machine Learning Views

Ali Malekpour and Xiongbiao Chen

JFB, 2022, 13, 40
DOI: 10.3390/jfb13020040

3D hybrid printing platform for auricular cartilage reconstruction

Johnson H Y Chung, Juliane C Kade, Ali Jeiranikhameneh, Kalani Ruberu, Payal Mukherjee, Zhilian Yue and Gordon G Wallace

Biomed. Phys. Eng. Express, 2020, 6, 035003
DOI: 10.1088/2057-1976/ab54a7

Wet-Spun Trojan Horse Cell Constructs for Engineering Muscle

Anita F. Quigley, Rhys Cornock, Tharun Mysore, Javad Foroughi, Magdalena Kita, Joselito M. Razal, Jeremy Crook, Simon E. Moulton, Gordon G. Wallace and Robert M. I. Kapsa

Front. Chem., 2020, 8
DOI: 10.3389/fchem.2020.00018

Review of 3D printable hydrogels and constructs

Huijun Li, Cavin Tan and Lin Li

Materials & Design, 2018, 159, 20
DOI: 10.1016/j.matdes.2018.08.023

Printability assessment of modified filament deposition modelling three dimensional bioprinter printer using polymeric formulations

Krithi Vishnu Balaji, Sumant Bhutoria, Sunita Nayak, PR Anil Kumar and Shiny Velayudhan

Biomedical Engineering Advances, 2023, 5, 100083
DOI: 10.1016/j.bea.2023.100083

Assessment methodologies for extrusion-based bioink printability

Gregory Gillispie, Peter Prim, Joshua Copus, John Fisher, Antonios G Mikos, James J Yoo, Anthony Atala and Sang Jin Lee

Biofabrication, 2020, 12, 022003
DOI: 10.1088/1758-5090/ab6f0d

Development of clay based novel hybrid bio-ink for 3D bio-printing process

Ahasan Habib and Bashir Khoda

Journal of Manufacturing Processes, 2019, 38, 76
DOI: 10.1016/j.jmapro.2018.12.034

Tissue and Organ 3D Bioprinting

Zengmin Xia, Sha Jin and Kaiming Ye

SLAS Technology, 2018, 23, 301
DOI: 10.1177/2472630318760515

Improved 3D Printing and Cell Biology Characterization of Inorganic-Filler Containing Alginate-Based Composites for Bone Regeneration: Particle Shape and Effective Surface Area Are the Dominant Factors for Printing Performance

Vera Bednarzig, Stefan Schrüfer, Tom C. Schneider, Dirk W. Schubert, Rainer Detsch and Aldo R. Boccaccini

IJMS, 2022, 23, 4750
DOI: 10.3390/ijms23094750

Use of Microfibrillated Cellulose/Lignosulfonate Blends as Carbon Precursors: Impact of Hydrogel Rheology on 3D Printing

Ying Shao, Didier Chaussy, Philippe Grosseau and Davide Beneventi

Ind. Eng. Chem. Res., 2015, 54, 10575
DOI: 10.1021/acs.iecr.5b02763

Three‐dimensional‐printed millireactor with yeast immobilized in calcium‐alginate film for application in fermentation processes

Mariana G. M. Lopes, Harrson S. Santana, Adriano G. P. da Silva and Osvaldir P. Taranto

AIChE Journal, 2022, 68
DOI: 10.1002/aic.17460

Callus-based 3D printing for food exemplified with carrot tissues and its potential for innovative food production

Sea Mi Park, Hyun Woo Kim and Hyun Jin Park

Journal of Food Engineering, 2020, 271, 109781
DOI: 10.1016/j.jfoodeng.2019.109781

Biomimetic Mineralization of Three-Dimensional Printed Alginate/TEMPO-Oxidized Cellulose Nanofibril Scaffolds for Bone Tissue Engineering

Ragab E. Abouzeid, Ramzi Khiari, Davide Beneventi and Alain Dufresne

Biomacromolecules, 2018, 19, 4442
DOI: 10.1021/acs.biomac.8b01325

The synergistic role of 3D printing in psoriasis: from personalized topical treatment development to advanced diagnostic modelling

Jigar Vyas, Nensi Raytthatha, Divya Gupta, Puja Vyas and Bhupendra G. Prajapati

Arch Dermatol Res, 2025, 318
DOI: 10.1007/s00403-025-04494-3

Wound Healing: From Passive to Smart Dressings

Mojtaba Farahani and Abbas Shafiee

Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202100477

Bioprintability: Physiomechanical and Biological Requirements of Materials for 3D Bioprinting Processes

Andrea S. Theus, Liqun Ning, Boeun Hwang, Carmen Gil, Shuai Chen, Allison Wombwell, Riya Mehta and Vahid Serpooshan

Polymers, 2020, 12, 2262
DOI: 10.3390/polym12102262

Fabrication of triple-crosslinked gelatin/alginate hydrogels for controlled release applications

Ke-Han Shen, Ting-Hsiang Chiu, Kuang-Chih Teng, Jiashing Yu and Yi-Cheun Yeh

International Journal of Biological Macromolecules, 2023, 250, 126133
DOI: 10.1016/j.ijbiomac.2023.126133

Three-dimensional printing of cell-laden bioink for blood vessel tissue engineering: influence of process parameters and components on cell viability

Chongshuai Chen, Congcong Zhan, Xia Huang, Shanfeng Zhang and Junying Chen

Journal of Biomaterials Science, Polymer Edition, 2023, 34, 2411
DOI: 10.1080/09205063.2023.2251781

Development and characterization of bioinks for 3D bioprinting of in vitro skeletal muscle constructs

Rodi Kado Abdalkader, Kosei Yamauchi, Satoshi Konishi and Takuya Fujita

Bioprinting, 2025, 46, e00396
DOI: 10.1016/j.bprint.2025.e00396

Bioprintable tough hydrogels for tissue engineering applications

Pramod Dorishetty, Naba K. Dutta and Namita Roy Choudhury

Advances in Colloid and Interface Science, 2020, 281, 102163
DOI: 10.1016/j.cis.2020.102163

3D printing of gelatin/chitosan biodegradable hybrid hydrogel: Critical issues due to the crosslinking reaction, degradation phenomena and process parameters

L. Giorleo, F. Tegazzini and L. Sartore

Bioprinting, 2021, 24, e00170
DOI: 10.1016/j.bprint.2021.e00170

Flexible capacitive pressure sensor array using acoustic-assisted fabrication of microstructures as surface and dielectric layers

Chengyao Xu, Deqing Mei, Lingfeng Zhu and Yancheng Wang

Sensors and Actuators A: Physical, 2022, 348, 114006
DOI: 10.1016/j.sna.2022.114006

Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior

Zhao Li, Sha Huang, Yufan Liu, Bin Yao, Tian Hu, Haigang Shi, Jiangfan Xie and Xiaobing Fu

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-26407-3

Direct 3D printing of freeform anisotropic bioactive structure based on shear-oriented ink system

Chenhui Yuan, Jinhong Jiang, Xinyu Zhang, Lin Gu, Xueping Wang and Lei Shao

Biofabrication, 2024, 16, 045011
DOI: 10.1088/1758-5090/ad6375

Silk fibroin/polyacrylamide-based tough 3D printing scaffold with strain sensing ability and chondrogenic activity

Yanan Geng, Tiexin Liu, Menglu Zhao, Haifeng Wei, Xiang Yao and Yaopeng Zhang

Composites Part B: Engineering, 2024, 271, 111173
DOI: 10.1016/j.compositesb.2023.111173

3D printing in biomedical engineering: Processes, materials, and applications

Jiahui Lai, Chong Wang and Min Wang

Applied Physics Reviews, 2021, 8
DOI: 10.1063/5.0024177

Current Advances of Three-Dimensional Bioprinting Application in Dentistry: A Scoping Review

Nurulhuda Mohd, Masfueh Razali, Mariyam Jameelah Ghazali and Noor Hayaty Abu Kasim

Materials, 2022, 15, 6398
DOI: 10.3390/ma15186398

3D printing of glycerol-mediated alginate hydrogels with high strength and stiffness

Deshuai Kong, Biao Yang, Hua Yuan, Cong Du and Yeqiang Tan

Journal of Materials Science & Technology, 2025, 213, 268
DOI: 10.1016/j.jmst.2024.07.001

A rheological approach to assess the printability of thermosensitive chitosan-based biomaterial inks

Maedeh Rahimnejad, Thierry Labonté-Dupuis, Nicole R Demarquette and Sophie Lerouge

Biomed. Mater., 2021, 16, 015003
DOI: 10.1088/1748-605X/abb2d8

Sustainable 3D printing of bone scaffolds using animal biowaste feedstocks

A. Dukle and M. Ravi Sankar

Next Sustainability, 2025, 5, 100099
DOI: 10.1016/j.nxsust.2025.100099

Biodesigned bioinks for 3D printing via divalent crosslinking of self-assembled peptide-polysaccharide hybrids

Kate Firipis, Elizabeth Footner, Mitchell Boyd-Moss, Chaitali Dekiwadia, David Nisbet, Robert MI. Kapsa, Elena Pirogova, Richard J. Williams and Anita Quigley

Materials Today Advances, 2022, 14, 100243
DOI: 10.1016/j.mtadv.2022.100243

Advances in carbon-based bioinks for bioprinting: Rheology, printability, and applications

Kami Bartholomew

ACJ, 2026, 165
DOI: 10.62184/acj.jacj1000202524

Recent advances and applications of artificial intelligence in 3D bioprinting

Hongyi Chen, Bin Zhang and Jie Huang

Biophysics Reviews, 2024, 5
DOI: 10.1063/5.0190208

3D Printing of Hydrogel-Based Biocompatible Materials

I. I. Preobrazhenskii and V. I. Putlyaev

Russ J Appl Chem, 2022, 95, 775
DOI: 10.1134/S1070427222060027

Advantage of Alginate Bioinks in Biofabrication for Various Tissue Engineering Applications

Sudipto Datta and Joanna Rydz

International Journal of Polymer Science, 2023, 2023, 1
DOI: 10.1155/2023/6661452

Extrusion‐Based 3D Bioprinted Gellan Gum/Poly(vinyl alcohol)/Nano‐Hydroxyapatite Composite Bioinks Promote Bone Regeneration

Konstantinos Loukelis, Georgia‐Ioanna Kontogianni, Dimitris Vlassopoulos and Maria Chatzinikolaidou

Adv Healthcare Materials, 2025, 14
DOI: 10.1002/adhm.202500365

Converging functionality: Strategies for 3D hybrid-construct biofabrication and the role of composite biomaterials for skeletal regeneration

Cesar R. Alcala-Orozco, Xiaolin Cui, Gary J. Hooper, Khoon S. Lim and Tim B.F. Woodfield

Acta Biomaterialia, 2021, 132, 188
DOI: 10.1016/j.actbio.2021.03.008

In-situ Printability Maps (IPM): A new approach for in-situ printability assessment with application to extrusion-based bioprinting

Giovanni Zanderigo, Filippo Bracco, Quirico Semeraro and Bianca Maria Colosimo

Bioprinting, 2023, 36, e00320
DOI: 10.1016/j.bprint.2023.e00320

Smart injectable hydrogels for periodontal regeneration: Recent advancements in biomaterials and biofabrication strategies

Bohan Yin, Jagan Mohan Dodda, Siu Hong Dexter Wong, G. Roshan Deen, Jeffrey S. Bate, Abhishek Pachauri, Behzad Shiroud Heidari, Tomáš Kovářík, Chi-An Luo and Shiao-Wen Tsai

Materials Today Bio, 2025, 32, 101855
DOI: 10.1016/j.mtbio.2025.101855

3D bioprinting of vascular conduits for pediatric congenital heart repairs

Wenhan Lee, Yi Hong and Guohao Dai

Translational Research, 2019, 211, 35
DOI: 10.1016/j.trsl.2019.03.007

Improving alginate printability for biofabrication: establishment of a universal and homogeneous pre-crosslinking technique

Jonas Hazur, Rainer Detsch, Emine Karakaya, Joachim Kaschta, Jörg Teßmar, Dominik Schneidereit, Oliver Friedrich, Dirk W Schubert and Aldo R Boccaccini

Biofabrication, 2020, 12, 045004
DOI: 10.1088/1758-5090/ab98e5

Regenerative medicine in orthopaedic surgery

Domenico Andrea Campanacci, Gianluca Scalici and Maurizio Scorianz

Int J Bone Frag, 2021, 1, 107
DOI: 10.57582/IJBF.210103.107

3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges

Berk Uysal, Ujith S. K. Madduma-Bandarage, Hasani G. Jayasinghe and Sundar Madihally

Gels, 2025, 11, 192
DOI: 10.3390/gels11030192

Mimicking the liver function in micro-patterned units: Challenges and perspectives in 3D bioprinting

Zahra Heydari, Paria Pooyan, Polina Bikmulina, Artem Pozdnyakov, Victor Fomin, Homeyra Seydi, Anastasia Shpichka, Peter Timashev and Massoud Vosough

Bioprinting, 2022, 27, e00208
DOI: 10.1016/j.bprint.2022.e00208

3D Bioprinting in Cancer Modeling and Biomedicine: From Print Categories to Biological Applications

Jianye Yang, Le Wang, Ruimei Wu, Yanan He, Yu Zhao, Wenchi Wang, Xiaochen Gao, Dan Wang, Lidan Zhao and Wenfang Li

ACS Omega, 2024, 9, 44076
DOI: 10.1021/acsomega.4c06051

An Adhesive Bioink toward Biofabrication under Wet Conditions

Wanlu Li, Mian Wang, Shiwei Wang, Xiaoping Wang, Alan Avila, Xiao Kuang, Xuan Mu, Carlos Ezio Garciamendez, Zewei Jiang, Jennifer Manríquez, Guosheng Tang, Jie Guo, Luis Santiago Mille, Juan Antonio Robledo, Di Wang, Feng Cheng, Hongbin Li, Regina Sanchez Flores, Zhibo Zhao, Clément Delavaux, Zixuan Wang, Arturo López, Sili Yi, Cuiping Zhou, Ameyalli Gómez, Carl Schuurmans, Guo‐Yuan Yang, Yongting Wang, Xingcai Zhang, Ximu Zhang and Yu Shrike Zhang

Small, 2023, 19
DOI: 10.1002/smll.202205078

Design of a novel bioink suitable for the 3D printing of lymphoid cells

Davide Ribezzi, Riccardo Pinos, Lorenzo Bonetti, Marco Cellani, Federica Barbaglio, Cristina Scielzo and Silvia Farè

Front. Biomater. Sci., 2023, 2
DOI: 10.3389/fbiom.2023.1081065

Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo

Peter Apelgren, Matteo Amoroso, Anders Lindahl, Camilla Brantsing, Nicole Rotter, Paul Gatenholm, Lars Kölby and Junsang Doh

PLoS ONE, 2017, 12, e0189428
DOI: 10.1371/journal.pone.0189428

Multifaceted polymeric materials in three‐dimensional processing (3DP) technologies: Current progress and prospects

Olayinka Oderinde, Shunli Liu, Kewen Li, Mengmeng Kang, Hussain Imtiaz, Fang Yao and Guodong Fu

Polymers for Advanced Techs, 2018, 29, 1586
DOI: 10.1002/pat.4281

From Microscale Devices to 3D Printing

Anton V. Borovjagin, Brenda M. Ogle, Joel L. Berry and Jianyi Zhang

Circulation Research, 2017, 120, 150
DOI: 10.1161/CIRCRESAHA.116.308538

Gelatin–Sodium Alginate Hydrogels Cross-Linked by Squaric Acid and Dialdehyde Starch as a Potential Bio-Ink

Joanna Skopinska-Wisniewska, Marta Tuszynska, Łukasz Kaźmierski, Mateusz Bartniak and Anna Bajek

Polymers, 2024, 16, 2560
DOI: 10.3390/polym16182560

Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs

N. Ashammakhi, S. Ahadian, C. Xu, H. Montazerian, H. Ko, R. Nasiri, N. Barros and A. Khademhosseini

Materials Today Bio, 2019, 1, 100008
DOI: 10.1016/j.mtbio.2019.100008

A Methodology for Quantifying Cell Density and Distribution in Multidimensional Bioprinted Gelatin–Alginate Constructs

Houzhu Ding, Filippos Tourlomousis and Robert C. Chang

Journal of Manufacturing Science and Engineering, 2018, 140
DOI: 10.1115/1.4037572

Enabling personalized implant and controllable biosystem development through 3D printing

Neerajha Nagarajan, Agnes Dupret-Bories, Erdem Karabulut, Pinar Zorlutuna and Nihal Engin Vrana

Biotechnology Advances, 2018, 36, 521
DOI: 10.1016/j.biotechadv.2018.02.004

Standing surface acoustic wave-assisted fabrication of patterned microstructures for enhancing cell migration

Yancheng Wang, Yue Wang, Deqing Mei, Zongkai Yu and Dai Xue

Bio-des. Manuf., 2020, 3, 87
DOI: 10.1007/s42242-020-00071-x

Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs

Elham Davoodi, Einollah Sarikhani, Hossein Montazerian, Samad Ahadian, Marco Costantini, Wojciech Swieszkowski, Stephanie Michelle Willerth, Konrad Walus, Mohammad Mofidfar, Ehsan Toyserkani, Ali Khademhosseini and Nureddin Ashammakhi

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201901044

Review of extrusion-based multi-material bioprinting processes

Nicholas Betancourt and Xiongbiao Chen

Bioprinting, 2022, 25, e00189
DOI: 10.1016/j.bprint.2021.e00189

Analytics in Extrusion-Based Bioprinting: Standardized Methods Improving Quantification and Comparability of the Performance of Bioinks

Svenja Strauß, David Grijalva Garces and Jürgen Hubbuch

Polymers, 2023, 15, 1829
DOI: 10.3390/polym15081829

3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity

Hadi Rastin, Renee T. Ormsby, Gerald J. Atkins and Dusan Losic

ACS Appl. Bio Mater., 2020, 3, 1815
DOI: 10.1021/acsabm.0c00169

Printability Evaluation of UV-Curable Aqueous Laponite/Urethane-Based PEG Inks

Aysu Arslan, Patrice Roose, Annemie Houben, Heidi Declercq, Sandra Van Vlierberghe and Peter Dubruel

ACS Appl. Polym. Mater., 2023, 5, 2345
DOI: 10.1021/acsapm.2c02013

3D-bioprinting for joint regeneration

Weida Li, Yi Wang, Yue Cui, Qiang Wu, Pu Ying, Kerong Dai and Ye Sun

Front. Bioeng. Biotechnol., 2026, 14
DOI: 10.3389/fbioe.2026.1742269

Extrusion-based bioprinting: considerations toward gelatin-alginate bioink

Kimia Abedi, Hamid Keshvari and Mehran Solati-Hashjin

RPJ, 2024, 30, 1094
DOI: 10.1108/RPJ-06-2023-0207

Printing strategies for functional chitosan-based carriers in biomedical and drug delivery applications: A comprehensive review

Ali Bakhshi, Mahya Bakhshi, Kavosh Zandsalimi, Mojtaba Hosseine, Mohammad Reza Daghigh Shirazi and Seyed Morteza Naghib

Materials Science and Engineering: R: Reports, 2026, 168, 101149
DOI: 10.1016/j.mser.2025.101149

3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering

Andrea Cochis, Lorenzo Bonetti, Rita Sorrentino, Nicola Contessi Negrini, Federico Grassi, Massimiliano Leigheb, Lia Rimondini and Silvia Farè

Materials, 2018, 11, 579
DOI: 10.3390/ma11040579

An Injectable Interpenetrating Polymer Network Hydrogel with Tunable Mechanical Properties and Self‐Healing Abilities

Yanan Wang, Hansen Yu, Haiyang Yang, Xiang Hao, Quan Tang and Xingyuan Zhang

Macro Chemistry & Physics, 2017, 218
DOI: 10.1002/macp.201700348

Highly elastic and self-healing nanostructured gelatin/clay colloidal gels with osteogenic capacity for minimally invasive and customized bone regeneration

Zhenzhen Dou, Han Tang, Kaiwen Chen, Dize Li, Qiwei Ying, Zhixiang Mu, Chuanfeng An, Fei Shao, Yang Zhang, Yonggang Zhang, Haoliang Bai, Guoshuang Zheng, Lijun Zhang, Tao Chen and Huanan Wang

Biofabrication, 2023, 15, 025001
DOI: 10.1088/1758-5090/acab36

3D printed oxidized alginate-gelatin bioink provides guidance for C2C12 muscle precursor cell orientation and differentiation via shear stress during bioprinting

Thomas Distler, Aditya A Solisito, Dominik Schneidereit, Oliver Friedrich, Rainer Detsch and Aldo R Boccaccini

Biofabrication, 2020, 12, 045005
DOI: 10.1088/1758-5090/ab98e4

Key parameters and applications of extrusion-based bioprinting

Shuyu Tian, Hong Zhao and Nastassja Lewinski

Bioprinting, 2021, 23, e00156
DOI: 10.1016/j.bprint.2021.e00156

Development of alginate dialdehyde-gelatin based bioink with methylcellulose for improving printability

Supachai Reakasame, Dalia Dranseikiene, Stefan Schrüfer, Kai Zheng, Dirk W. Schubert and Aldo R. Boccaccini

Materials Science and Engineering: C, 2021, 128, 112336
DOI: 10.1016/j.msec.2021.112336

3D bioprinted complex constructs reinforced by hybrid multilayers of electrospun nanofiber sheets

Yeji Yoon, Chae Hwa Kim, Ji Eun Lee, Jonghun Yoon, Nak Kyu Lee, Tae Hee Kim and Suk-Hee Park

Biofabrication, 2019, 11, 025015
DOI: 10.1088/1758-5090/ab08c2

Coupling machine learning with 3D bioprinting to fast track optimisation of extrusion printing

Kalani Ruberu, Manisha Senadeera, Santu Rana, Sunil Gupta, Johnson Chung, Zhilian Yue, Svetha Venkatesh and Gordon Wallace

Applied Materials Today, 2021, 22, 100914
DOI: 10.1016/j.apmt.2020.100914

Impact of advanced mixing techniques and ink composition on gelation and rheology of alginate-pea-protein-inks in 3D printing for cultivated meat

Lisa Woelken, Sabrina Bäther, Klara Dehmlow, José Alberto Rodríguez Agudo, Dongwei Wu, Jens Kurreck, Anja Maria Wagemans and Cornelia Rauh

Food Hydrocolloids, 2026, 178, 112694
DOI: 10.1016/j.foodhyd.2026.112694

Sacrificial microgel-laden bioink-enabled 3D bioprinting of mesoscale pore networks

Lei Shao, Qing Gao, Chaoqi Xie, Jianzhong Fu, Meixiang Xiang, Zhenjie Liu, Liulin Xiang and Yong He

Bio-des. Manuf., 2020, 3, 30
DOI: 10.1007/s42242-020-00062-y

Differential Responses to Bioink-Induced Oxidative Stress in Endothelial Cells and Fibroblasts

Hatice Genç, Jonas Hazur, Emine Karakaya, Barbara Dietel, Faina Bider, Jürgen Groll, Christoph Alexiou, Aldo R. Boccaccini, Rainer Detsch and Iwona Cicha

IJMS, 2021, 22, 2358
DOI: 10.3390/ijms22052358

Sodium Alginate/Gelatine Hydrogels for Direct Bioprinting—The Effect of Composition Selection and Applied Solvents on the Bioink Properties

Dorota Bociaga, Mateusz Bartniak, Jacek Grabarczyk and Karolina Przybyszewska

Materials, 2019, 12, 2669
DOI: 10.3390/ma12172669

Converging 2D Nanomaterials and 3D Bioprinting Technology: State‐of‐the‐Art, Challenges, and Potential Outlook in Biomedical Applications

Hadi Rastin, Negar Mansouri, Tran Thanh Tung, Kamrul Hassan, Arash Mazinani, Mahnaz Ramezanpour, Pei Lay Yap, Le Yu, Sarah Vreugde and Dusan Losic

Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202101439

Constraint based Bayesian optimization of bioink precursor: a machine learning framework

Yihao Xu, Rokeya Sarah, Ahasan Habib, Yongmin Liu and Bashir Khoda

Biofabrication, 2024, 16, 045031
DOI: 10.1088/1758-5090/ad716e

Additive Manufacturing With Conductive, Viscoelastic Polymer Composites: Direct-Ink-Writing of Electrolytic and Anodic Poly(Ethylene Oxide) Composites

Sepehr Nesaei, Mitch Rock, Yu Wang, Michael R. Kessler and Arda Gozen

Journal of Manufacturing Science and Engineering, 2017, 139
DOI: 10.1115/1.4037238

Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing

Jia Min Lee, Wei Long Ng and Wai Yee Yeong

Applied Physics Reviews, 2019, 6
DOI: 10.1063/1.5053909

Coaxial 3D bioprinting of organ prototyps from nutrients delivery to vascularization

Hamed Ramezani, Lu-yu Zhou, Lei Shao and Yong He

J. Zhejiang Univ. Sci. A, 2020, 21, 859
DOI: 10.1631/jzus.A2000261

Enhancing Peptide Biomaterials for Biofabrication

Kate Firipis, David R. Nisbet, Stephanie J. Franks, Robert M. I. Kapsa, Elena Pirogova, Richard J. Williams and Anita Quigley

Polymers, 2021, 13, 2590
DOI: 10.3390/polym13162590

Bioink properties before, during and after 3D bioprinting

Katja Hölzl, Shengmao Lin, Liesbeth Tytgat, Sandra Van Vlierberghe, Linxia Gu and Aleksandr Ovsianikov

Biofabrication, 2016, 8, 032002
DOI: 10.1088/1758-5090/8/3/032002

Complex Tuning of Physical Properties of Hyperbranched Polyglycerol‐Based Bioink for Microfabrication of Cell‐Laden Hydrogels

Jisu Hong, Yoonkyung Shin, Suntae Kim, Jiseok Lee and Chaenyung Cha

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201808750

Microfabrication of Custom Collagen Structures Capable of Guiding Cell Morphology and Alignment

Eun-A Kwak, Suji Ahn and Justyn Jaworski

Biomacromolecules, 2015, 16, 1761
DOI: 10.1021/acs.biomac.5b00295

3D bioprinting for diagnostic and therapeutic application

Aarti Puri, Nitin Sahai, Tanzeel Ahmed and Kuldeep Saxena

Materials Today: Proceedings, 2023
DOI: 10.1016/j.matpr.2023.08.165

Bio-plotted hydrogel scaffold with core and sheath strand-enhancing mechanical and biological properties for tissue regeneration

Ji Min Seok, Jae Eun Jeong, Sang Jin Lee, Seung Hyun Im, Jun Hee Lee, Wan Doo Kim, Kangwon Lee and Su A Park

Colloids and Surfaces B: Biointerfaces, 2021, 205, 111919
DOI: 10.1016/j.colsurfb.2021.111919

3D bioprinting of photocrosslinkable hydrogel constructs

Rúben F. Pereira and Paulo J. Bártolo

J of Applied Polymer Sci, 2015, 132
DOI: 10.1002/app.42458

3D printing with cellulose materials

Qianqian Wang, Jianzhong Sun, Qian Yao, Chencheng Ji, Jun Liu and Qianqian Zhu

Cellulose, 2018, 25, 4275
DOI: 10.1007/s10570-018-1888-y

Composite Hydrogels in Three-Dimensional in vitro Models

Zhitong Zhao, Catarina Vizetto-Duarte, Zi Kuang Moay, Magdiel Inggrid Setyawati, Moumita Rakshit, Mustafa Hussain Kathawala and Kee Woei Ng

Front. Bioeng. Biotechnol., 2020, 8
DOI: 10.3389/fbioe.2020.00611

A novel portable in situ printer for hydrogel multi-structure molding and cell printing

Huazhen Liu, Yi Zhang, Zhian Jian, Chuang Gao, Chunxiang Lu, Qiqi Dai, Hao Qiao and Yuanyuan Liu

APL Bioengineering, 2023, 7
DOI: 10.1063/5.0176301

3D biofabrication for tubular tissue engineering

Ian Holland, Jack Logan, Jiezhong Shi, Christopher McCormick, Dongsheng Liu and Wenmiao Shu

Bio-des. Manuf., 2018, 1, 89
DOI: 10.1007/s42242-018-0013-2

Recent Advances in Alginate-Based Hydrogels for Cell Transplantation Applications

Alireza Kavand, François Noverraz and Sandrine Gerber-Lemaire

Pharmaceutics, 2024, 16, 469
DOI: 10.3390/pharmaceutics16040469

3D Printing for Tissue Engineering: Printing Techniques, Biomaterials, Challenges, and the Emerging Role of 4D Bioprinting

Victor M. Arias-Peregrino, Aldo Y. Tenorio-Barajas, Claudia O. Mendoza-Barrera, Jesús Román-Doval, Esteban F. Lavariega-Sumano, Sandra P. Torres-Arellanes and Ramón Román-Doval

Bioengineering, 2025, 12, 936
DOI: 10.3390/bioengineering12090936

Innovative thermosensitive alginate bioink combining cations for enhanced 3D extrusion bioprinting for tissue engineering

Kaline N. Ferreira, Juliana B. Girón, Gustavo H.M. Gomes, Andrea C.D. Rodas, Jorge V.L. da Silva, Juliana K.M.B. Daguano and Marcos A. Sabino

Bioprinting, 2024, 39, e00340
DOI: 10.1016/j.bprint.2024.e00340

Tailoring of the rheological properties of bioinks to improve bioprinting and bioassembly for tissue replacement

Mario Chopin-Doroteo, Edna Ayerim Mandujano-Tinoco and Edgar Krötzsch

Biochimica et Biophysica Acta (BBA) - General Subjects, 2021, 1865, 129782
DOI: 10.1016/j.bbagen.2020.129782

Cancer Cell Direct Bioprinting: A Focused Review

David Angelats Lobo, Paola Ginestra, Elisabetta Ceretti, Teresa Puig Miquel and Joaquim Ciurana

Micromachines, 2021, 12, 764
DOI: 10.3390/mi12070764

Cell Bioprinting: The 3D-Bioplotter™ Case

David Angelats Lobo and Paola Ginestra

Materials, 2019, 12, 4005
DOI: 10.3390/ma12234005

3D bioprinting: an emerging technology full of opportunities and challenges

Bin Zhang, Yichen Luo, Liang Ma, Lei Gao, Yuting Li, Qian Xue, Huayong Yang and Zhanfeng Cui

Bio-des. Manuf., 2018, 1, 2
DOI: 10.1007/s42242-018-0004-3

Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks

Sang Cheon Lee, Gregory Gillispie, Peter Prim and Sang Jin Lee

Chem. Rev., 2020, 120, 10834
DOI: 10.1021/acs.chemrev.0c00015

A bioprintable form of chitosan hydrogel for bone tissue engineering

Tuğrul Tolga Demirtaş, Gülseren Irmak and Menemşe Gümüşderelioğlu

Biofabrication, 2017, 9, 035003
DOI: 10.1088/1758-5090/aa7b1d

3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications

Kajsa Markstedt, Athanasios Mantas, Ivan Tournier, Héctor Martínez Ávila, Daniel Hägg and Paul Gatenholm

Biomacromolecules, 2015, 16, 1489
DOI: 10.1021/acs.biomac.5b00188

Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications

Bae Lee, Nathaniel Lum, Li Seow, Pei Lim and Lay Tan

Materials, 2016, 9, 797
DOI: 10.3390/ma9100797

Wood‐Inspired Binder Enabled Vertical 3D Printing of g‐C3N4/CNT Arrays for Highly Efficient Photoelectrochemical Hydrogen Evolution

Bo Jiang, Hui Huang, Wenbin Gong, Xiaoqing Gu, Ting Liu, Junchang Zhang, Wei Qin, Hui Chen, Yongcan Jin, Zhiqiang Liang and Lin Jiang

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202105045

Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells

Liliang Ouyang, Rui Yao, Yu Zhao and Wei Sun

Biofabrication, 2016, 8, 035020
DOI: 10.1088/1758-5090/8/3/035020

Development of a bioink using exopolysaccharide from Rhizobium sp. PRIM17

Athmika Nagaraj and Punchappady Devasya Rekha

International Journal of Biological Macromolecules, 2023, 234, 123608
DOI: 10.1016/j.ijbiomac.2023.123608

Engineered proteins and three-dimensional printing of living materials

Ram Surya Gona and Anne S. Meyer

MRS Bull., 2020, 45, 1034
DOI: 10.1557/mrs.2020.298

3D‐Printed, All‐in‐One Evaporator for High‐Efficiency Solar Steam Generation under 1 Sun Illumination

Yiju Li, Tingting Gao, Zhi Yang, Chaoji Chen, Wei Luo, Jianwei Song, Emily Hitz, Chao Jia, Yubing Zhou, Boyang Liu, Bao Yang and Liangbing Hu

Advanced Materials, 2017, 29
DOI: 10.1002/adma.201700981

3D Printing of Cytocompatible Graphene/Alginate Scaffolds for Mimetic Tissue Constructs

Jianfeng Li, Xiao Liu, Jeremy M. Crook and Gordon G. Wallace

Front. Bioeng. Biotechnol., 2020, 8
DOI: 10.3389/fbioe.2020.00824

Advances in Photocrosslinkable Materials for 3D Bioprinting

Wen Zhang, Wenbo Ye and Yunfeng Yan

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202100663

3D Printing of Alginate-Natural Clay Hydrogel-Based Nanocomposites

Rebeca Leu Alexa, Raluca Ianchis, Diana Savu, Mihaela Temelie, Bogdan Trica, Andrada Serafim, George Mihail Vlasceanu, Elvira Alexandrescu, Silviu Preda and Horia Iovu

Gels, 2021, 7, 211
DOI: 10.3390/gels7040211

Engineering Hydrogels for the Development of Three-Dimensional In Vitro Models

Somnath Maji and Hyungseok Lee

IJMS, 2022, 23, 2662
DOI: 10.3390/ijms23052662

3D/4D printed super reconstructed foods: Characteristics, research progress, and prospects

Hao Shi, Min Zhang and Arun S. Mujumdar

Comp Rev Food Sci Food Safe, 2024, 23
DOI: 10.1111/1541-4337.13310

Three-Dimensional Hydrogel Bioprinting Technology as a Scaffold of Novel Drug Delivery and Biomedical Devices: A Comprehensive Review

Mohhammad Ramzan, Mohammed Sabir, Sukhbir Singh, Abhijit Debnath and P.K. Prabhakar

BIO Web Conf., 2024, 86, 01013
DOI: 10.1051/bioconf/20248601013

Current advances and future perspectives of 3D printing natural-derived biopolymers

Jun Liu, Lushan Sun, Wenyang Xu, Qianqian Wang, Sujie Yu and Jianzhong Sun

Carbohydrate Polymers, 2019, 207, 297
DOI: 10.1016/j.carbpol.2018.11.077

Coaxial extrusion bioprinting of hydrazone crosslinked POEGMA hydrogels: Optimizing needle geometry to achieve improved print quality

Eva Mueller, Afshin Abrishamkar, Ron Galaev, Kwan Kiu Lau, Laura Neely and Todd Hoare

Bioprinting, 2023, 35, e00307
DOI: 10.1016/j.bprint.2023.e00307

The fabrication of the chitosan-based bioink for in vitro tissue repair and regeneration: A review

Xiao Zhang, Feng Cheng, Md Rashidul Islam and Hongbin Li

International Journal of Biological Macromolecules, 2024, 257, 128504
DOI: 10.1016/j.ijbiomac.2023.128504

Self-Supported Printing of Gelatin Composite-Based Engineered Living Materials

Ayman Alghamdi, Chuanshen Zhou, Ali T. Shams, John-Thomas T. Robinson, Renjing Wang, Taylor Rawlinson, Hitomi Yamaguchi and Yong Huang

Journal of Manufacturing Science and Engineering, 2025, 147
DOI: 10.1115/1.4068939

A bioprinting printing approach to regenerate cartilage for microtia treatment

Johnson H.Y. Chung, Juliane Kade, Ali Jeiranikhameneh, Zhilian Yue, Payal Mukherjee and Gordon G. Wallace

Bioprinting, 2018, 12, e00031
DOI: 10.1016/j.bprint.2018.e00031

Printability–A key issue in extrusion-based bioprinting

Saman Naghieh and Xiongbiao Chen

Journal of Pharmaceutical Analysis, 2021, 11, 564
DOI: 10.1016/j.jpha.2021.02.001

Comprehensive Characterisation of Photocurable PEGDA/Gelatine Hydrogels for Extrusion-Based 3D Printing

Corona Morató-Cecchini, David Rodríguez-González, Lucía Celada, Lucía Sánchez-Suárez, Manuel Alejandro Fernández, Enrique Aguilar and Helena Herrada-Manchón

Gels, 2026, 12, 137
DOI: 10.3390/gels12020137

Optimization of gelatin–alginate composite bioink printability using rheological parameters: a systematic approach

Teng Gao, Gregory J Gillispie, Joshua S Copus, Anil Kumar PR, Young-Joon Seol, Anthony Atala, James J Yoo and Sang Jin Lee

Biofabrication, 2018, 10, 034106
DOI: 10.1088/1758-5090/aacdc7

Solid-state NMR methods for the characterization of bioconjugations and protein-material interactions

Linda Cerofolini, Giacomo Parigi, Enrico Ravera, Marco Fragai and Claudio Luchinat

Solid State Nuclear Magnetic Resonance, 2022, 122, 101828
DOI: 10.1016/j.ssnmr.2022.101828

Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting

Myoung Hwan Kim, Yong Wook Lee, Won-Kyo Jung, Junghwan Oh and Seung Yun Nam

Journal of the Mechanical Behavior of Biomedical Materials, 2019, 98, 187
DOI: 10.1016/j.jmbbm.2019.06.014

Recent Development of Alginate-Based Materials and Their Versatile Functions in Biomedicine, Flexible Electronics, and Environmental Uses

Kaixuan Teng, Qi An, Yao Chen, Yihe Zhang and Yantao Zhao

ACS Biomater. Sci. Eng., 2021, 7, 1302
DOI: 10.1021/acsbiomaterials.1c00116

Replace and repair: Biomimetic bioprinting for effective muscle engineering

Cooper Blake, Oliver Massey, Mitchell Boyd-Moss, Kate Firipis, Aaqil Rifai, Stephanie Franks, Anita Quigley, Robert Kapsa, David R. Nisbet and Richard J. Williams

APL Bioengineering, 2021, 5
DOI: 10.1063/5.0040764

Development of a highly concentrated collagen ink for the creation of a 3D printed meniscus

Alfredo Ronca, Ugo D'Amora, Elisa Capuana, Carla Zihlmann, Niklaus Stiefel, Girish Pattappa, Ruth Schewior, Denitsa Docheva, Peter Angele and Luigi Ambrosio

Heliyon, 2023, 9, e23107
DOI: 10.1016/j.heliyon.2023.e23107

3D bioprinting of the kidney—hype or hope?

Sanna Turunen, Susanna Kaisto, Ilya Skovorodkin, Vladimir Mironov, Tomi Kalpio, Seppo Vainio and Aleksandra Rak-Raszewska

AIMS Cell and Tissue Engineering, 2018, 2, 119
DOI: 10.3934/celltissue.2018.3.119

An integrated manufacturing strategy to fabricate delivery system using gelatin/alginate hybrid hydrogels: 3D printing and freeze-drying

Chih-Chun Kuo, Hantang Qin, Yiliang Cheng, Xuepeng Jiang and Xiaolei Shi

Food Hydrocolloids, 2021, 111, 106262
DOI: 10.1016/j.foodhyd.2020.106262

Advancing scaffold porosity through a machine learning framework in extrusion based 3D bioprinting

Shah M. Limon, Connor Quigley, Rokeya Sarah and Ahasan Habib

Front. Mater., 2024, 10
DOI: 10.3389/fmats.2023.1337485

Application of 3D Bioprinters for Dental Pulp Regeneration and Tissue Engineering (Porous architecture)

Pedram Iranmanesh, Athena Ehsani, Abbasali Khademi, Azadeh Asefnejad, Sheyda Shahriari, Maryam Soleimani, Mazyar Ghadiri Nejad, Saeed Saber-Samandari and Amirsalar Khandan

Transp Porous Med, 2022, 142, 265
DOI: 10.1007/s11242-021-01618-x

Influence of Cross-Linking Conditions on Drying Kinetics of Alginate Hydrogel

Magdalena B. Łabowska, Maria Skrodzka, Hanna Sicińska, Izabela Michalak and Jerzy Detyna

Gels, 2023, 9, 63
DOI: 10.3390/gels9010063

Coculture of Chondrocytes and Stem Cells: A Review of Head and Neck Cell Lines for Cartilage Regeneration

Michael Fook-Ho Lee, Daniel Steffens, Johnson H.Y. Chung, Steven Posniak, Kai Cheng, Jonathan Clark, Gordon Wallace and Payal Mukherjee

Cells Tissues Organs, 2024, 1
DOI: 10.1159/000538461

Versatile Cell-Specific Ligand Arrangement System onto Desired Compartments of Biodegradable Matrices for Site-Selective Cell Adhesion Using DNA Tags

Hiromichi Sumida, Yuta Yoshizaki, Akinori Kuzuya and Yuichi Ohya

Biomacromolecules, 2020, 21, 3713
DOI: 10.1021/acs.biomac.0c00814

Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting

David Chimene, Charles W. Peak, James L. Gentry, James K. Carrow, Lauren M. Cross, Eli Mondragon, Guinea B. Cardoso, Roland Kaunas and Akhilesh K. Gaharwar

ACS Appl. Mater. Interfaces, 2018, 10, 9957
DOI: 10.1021/acsami.7b19808

3D bioprinted tumor model with extracellular matrix enhanced bioinks for nanoparticle evaluation

You Chen, Langtao Xu, Weilin Li, Wanqi Chen, Qiubei He, Xiaoge Zhang, Junjie Tang, Yizhen Wang, Bo Liu and Jie Liu

Biofabrication, 2022, 14, 025002
DOI: 10.1088/1758-5090/ac48e4

Fabrication of k-Carrageenan/Alginate/Carboxymethyl Cellulose basedScaffolds via 3D Printing for Potential Biomedical Applications

Cristina Stavarache, Adi Ghebaur, Andrada Serafim, George Mihail Vlăsceanu, Eugeniu Vasile, Sorina Alexandra Gârea and Horia Iovu

Polymers, 2024, 16, 1592
DOI: 10.3390/polym16111592

In Situ 3D Bioprinting: Impact of Cross‐Linking on the Adhesive Properties of Hydrogels

Odile Romero Fernandez, Mulazim Hussain Asim, Shumaila Arshad, Gergely Kali and Andreas Bernkop‐Schnürch

Adv Funct Materials, 2026
DOI: 10.1002/adfm.202530372

Extrusion of Cell Encapsulated in Boron Nitride Nanotubes Reinforced Gelatin—Alginate Bioink for 3D Bioprinting

Akesh Babu Kakarla, Ing Kong, Cin Kong, Helen Irving and Colleen J. Thomas

Gels, 2022, 8, 603
DOI: 10.3390/gels8100603

The Applications of 3D Printing for Craniofacial Tissue Engineering

Owen Tao, Jacqueline Kort-Mascort, Yi Lin, Hieu Pham, André Charbonneau, Osama ElKashty, Joseph Kinsella and Simon Tran

Micromachines, 2019, 10, 480
DOI: 10.3390/mi10070480

Three-dimensional bioprinting of tissue-engineered skin: Biomaterials, fabrication techniques, challenging difficulties, and future directions: A review

Qinghua Wei, Yalong An, Xudong Zhao, Mingyang Li and Juan Zhang

International Journal of Biological Macromolecules, 2024, 266, 131281
DOI: 10.1016/j.ijbiomac.2024.131281

3D printable carboxylated cellulose nanocrystal-reinforced hydrogel inks for tissue engineering

Anuj Kumar, Ibrahim Abdullah I Matari and Sung Soo Han

Biofabrication, 2020, 12, 025029
DOI: 10.1088/1758-5090/ab736e

The development of a modular and open-source multi-head 3D bioprinter for fabricating complex structures

Lan Xuan Phung, Tuan Quang Ta, Vuong-Hung Pham, Minh Thi Hong Nguyen, Truong Do and Trung Kien Nguyen

Bioprinting, 2024, 39, e00339
DOI: 10.1016/j.bprint.2024.e00339

Applications of Alginate-Based Bioinks in 3D Bioprinting

Eneko Axpe and Michelle Oyen

IJMS, 2016, 17, 1976
DOI: 10.3390/ijms17121976

Bioprinting and Differentiation of Stem Cells

Scott Irvine and Subbu Venkatraman

Molecules, 2016, 21, 1188
DOI: 10.3390/molecules21091188

Graphene oxide-based evaporator with one-dimensional water transport enabling high-efficiency solar desalination

Yiju Li, Tingting Gao, Zhi Yang, Chaoji Chen, Yudi Kuang, Jianwei Song, Chao Jia, Emily M. Hitz, Bao Yang and Liangbing Hu

Nano Energy, 2017, 41, 201
DOI: 10.1016/j.nanoen.2017.09.034

Mending a broken heart by biomimetic 3D printed natural biomaterial-based cardiac patches: a review

Elisabetta Rosellini, Maria Grazia Cascone, Lorenzo Guidi, Dirk W. Schubert, Judith A. Roether and Aldo R. Boccaccini

Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.1254739

Models of the Gut for Analyzing the Impact of Food and Drugs

Chiara Anna Maria Fois, Thi Yen Loan Le, Aaron Schindeler, Sina Naficy, Dale David McClure, Mark Norman Read, Peter Valtchev, Ali Khademhosseini and Fariba Dehghani

Adv Healthcare Materials, 2019, 8
DOI: 10.1002/adhm.201900968

Engineered 3D Polymer and Hydrogel Microenvironments for Cell Culture Applications

Daniel Fan, Urs Staufer and Angelo Accardo

Bioengineering, 2019, 6, 113
DOI: 10.3390/bioengineering6040113

Rheological Characterization and Printability of Sodium Alginate–Gelatin Hydrogel for 3D Cultures and Bioprinting

Mohan Kumar Dey and Ram V. Devireddy

Biomimetics, 2025, 10, 28
DOI: 10.3390/biomimetics10010028

Coaxial extrusion bioprinted shell-core hydrogel microfibers mimic glioma microenvironment and enhance the drug resistance of cancer cells

Xuanzhi Wang, Xinda Li, Xingliang Dai, Xinzhi Zhang, Jing Zhang, Tao Xu and Qing Lan

Colloids and Surfaces B: Biointerfaces, 2018, 171, 291
DOI: 10.1016/j.colsurfb.2018.07.042

Advanced supramolecular hydrogels and their applications in the formulation of next-generation bioinks for tissue engineering: A review

Ruiqi Jing, Cristian P. Pennisi, Thorbjørn T. Nielsen and Kim L. Larsen

International Journal of Biological Macromolecules, 2025, 311, 143461
DOI: 10.1016/j.ijbiomac.2025.143461

3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy

Jun Yin, Mengling Yan, Yancheng Wang, Jianzhong Fu and Hairui Suo

ACS Appl. Mater. Interfaces, 2018, 10, 6849
DOI: 10.1021/acsami.7b16059

3D-Printing Assisted SF-SA Based MgP Hybrid Hydrogel Scaffold for Bone Tissue Engineering

Qiuyi Mao, Bowen Zhu, Hai Zhuang and Shoushan Bu

Front. Mater., 2022, 9
DOI: 10.3389/fmats.2022.896516

3D Bioprinting of Human Adipose-Derived Stem Cells and Their Tenogenic Differentiation in Clinical-Grade Medium

Deborah Stanco, Monica Boffito, Alessia Bogni, Luca Puricelli, Josefa Barrero, Gianni Soldati and Gianluca Ciardelli

IJMS, 2020, 21, 8694
DOI: 10.3390/ijms21228694

A Custom Ultra-Low-Cost 3D Bioprinter Supports Cell Growth and Differentiation

Konstantinos Ioannidis, Rodolfos I. Danalatos, Spyridon Champeris Tsaniras, Konstantina Kaplani, Georgia Lokka, Anastasia Kanellou, Dionysios J. Papachristou, Georgios Bokias, Zoi Lygerou and Stavros Taraviras

Front. Bioeng. Biotechnol., 2020, 8
DOI: 10.3389/fbioe.2020.580889

Advanced Design and 3D Printing Strategies With Alginate‐Nanoclay Nanocomposites: From Microstructure to Bioprinting

Weijian Hua, Cheng Zhang, Kellen Mitchell, Lily Raymond, Dale K. Hensley, Ryan Coulter, Erick Bandala, Jihua Chen, Changwoo Do, Danyang Zhao and Yifei Jin

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401167

Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering

Xingchen Yang, Zhenhui Lu, Huayu Wu, Wei Li, Li Zheng and Jinmin Zhao

Materials Science and Engineering: C, 2018, 83, 195
DOI: 10.1016/j.msec.2017.09.002

Advances in bioprinted cell-laden hydrogels for skin tissue engineering

Rúben F. Pereira, Aureliana Sousa, Cristina C. Barrias, Ardeshir Bayat, Pedro L. Granja and Paulo J. Bártolo

Biomanuf Rev, 2017, 2
DOI: 10.1007/s40898-017-0003-8

Regenerative strategies for kidney engineering

Nuria Montserrat, Elena Garreta and Juan Carlos Izpisua Belmonte

The FEBS Journal, 2016, 283, 3303
DOI: 10.1111/febs.13704

Natural Polymers for Organ 3D Bioprinting

Fan Liu, Qiuhong Chen, Chen Liu, Qiang Ao, Xiaohong Tian, Jun Fan, Hao Tong and Xiaohong Wang

Polymers, 2018, 10, 1278
DOI: 10.3390/polym10111278

Culture of 3D bioprinted bone constructs requires an increased fluid dynamic stimulation

V.L. Mainardi, M. Rubert, C. Sabato, A. de Leeuw, C. Arrigoni, G. Dubini, C. Candrian, R. Müller and M. Moretti

Acta Biomaterialia, 2022, 153, 374
DOI: 10.1016/j.actbio.2022.09.011

Extrusion bioprinting: Recent progress, challenges, and future opportunities

Srikanthan Ramesh, Ola L.A. Harrysson, Prahalada K. Rao, Ali Tamayol, Denis R. Cormier, Yunbo Zhang and Iris V. Rivero

Bioprinting, 2021, 21, e00116
DOI: 10.1016/j.bprint.2020.e00116

3D-printing and the effect on medical costs: a new era?

Yahya E. Choonara, Lisa C. du Toit, Pradeep Kumar, Pierre P. D. Kondiah and Viness Pillay

Expert Review of Pharmacoeconomics & Outcomes Research, 2016, 16, 23
DOI: 10.1586/14737167.2016.1138860

Evaluation of the Higher Order Structure of Biotherapeutics Embedded in Hydrogels for Bioprinting and Drug Release

Domenico Rizzo, Linda Cerofolini, Anna Pérez-Ràfols, Stefano Giuntini, Fabio Baroni, Enrico Ravera, Claudio Luchinat and Marco Fragai

Anal. Chem., 2021, 93, 11208
DOI: 10.1021/acs.analchem.1c01850

Advanced 3D Bioprinting Technology for Cartilage Engineering and Regeneration

Xinyang Du, Hongyi Gu, Xinyi Ouyang, Zhiyang Ma, Hailong Guo, Rui Li, Xudong Yao, Yingchun Zhu and Xiaozhao Wang

ACS Biomater. Sci. Eng., 2025, 11, 5780
DOI: 10.1021/acsbiomaterials.5c01107

Essential steps in bioprinting: From pre- to post-bioprinting

Pallab Datta, Ananya Barui, Yang Wu, Veli Ozbolat, Kazim K. Moncal and Ibrahim T. Ozbolat

Biotechnology Advances, 2018, 36, 1481
DOI: 10.1016/j.biotechadv.2018.06.003

Characterization and printability of Sodium alginate -Gelatin hydrogel for bioprinting NSCLC co-culture

Arindam Mondal, Aragaw Gebeyehu, Mariza Miranda, Divya Bahadur, Nilkumar Patel, Subhramanian Ramakrishnan, Arun K. Rishi and Mandip Singh

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-55034-9

A review on 3D printing in tissue engineering applications

Mohan Prasath Mani, Madeeha Sadia, Saravana Kumar Jaganathan, Ahmad Zahran Khudzari, Eko Supriyanto, Syafiqah Saidin, Seeram Ramakrishna, Ahmad Fauzi Ismail and Ahmad Athif Mohd Faudzi

Journal of Polymer Engineering, 2022, 42, 243
DOI: 10.1515/polyeng-2021-0059

Integrating Pneumatic and Thermal Control in 3D Bioprinting for Improved Bio-Ink Handling

Perrin Woods, Carter Smith, Scott Clark and Ahasan Habib

Designs, 2024, 8, 83
DOI: 10.3390/designs8040083

Three-dimensional printing of biological matters

Ahmed Munaz, Raja K. Vadivelu, James St. John, Matthew Barton, Harshad Kamble and Nam-Trung Nguyen

Journal of Science: Advanced Materials and Devices, 2016, 1, 1
DOI: 10.1016/j.jsamd.2016.04.001

Cell death persists in rapid extrusion of lysis-resistant coated cardiac myoblasts

Calvin F. Cahall, Aman Preet Kaur, Kara A. Davis, Jonathan T. Pham, Hainsworth Y. Shin and Brad J. Berron

Bioprinting, 2020, 18, e00072
DOI: 10.1016/j.bprint.2019.e00072

A Review on the Adaption of Alginate-Gelatin Hydrogels for 3D Cultures and Bioprinting

Magdalena B. Łabowska, Karolina Cierluk, Agnieszka M. Jankowska, Julita Kulbacka, Jerzy Detyna and Izabela Michalak

Materials, 2021, 14, 858
DOI: 10.3390/ma14040858

High density cell seeding affects the rheology and printability of collagen bioinks

Nicole Diamantides, Caroline Dugopolski, Eric Blahut, Stephen Kennedy and Lawrence J Bonassar

Biofabrication, 2019, 11, 045016
DOI: 10.1088/1758-5090/ab3524

Recent Applications of Three Dimensional Printing in Cardiovascular Medicine

Chiara Gardin, Letizia Ferroni, Christian Latremouille, Juan Carlos Chachques, Dinko Mitrečić and Barbara Zavan

Cells, 2020, 9, 742
DOI: 10.3390/cells9030742

Vascularization of tissue engineered cartilage - Sequential in vivo MRI display functional blood circulation

Peter Apelgren, Matteo Amoroso, Karin Säljö, Mikael Montelius, Anders Lindahl, Linnea Stridh Orrhult, Paul Gatenholm and Lars Kölby

Biomaterials, 2021, 276, 121002
DOI: 10.1016/j.biomaterials.2021.121002

A General Strategy for Extrusion Bioprinting of Bio‐Macromolecular Bioinks through Alginate‐Templated Dual‐Stage Crosslinking

Kai Zhu, Nan Chen, Xiao Liu, Xuan Mu, Weijia Zhang, Chunsheng Wang and Yu Shrike Zhang

Macromolecular Bioscience, 2018, 18
DOI: 10.1002/mabi.201800127

Role of nanostructured materials in hard tissue engineering

Ramón Rial, Zhen Liu, Paula Messina and Juan M. Ruso

Advances in Colloid and Interface Science, 2022, 304, 102682
DOI: 10.1016/j.cis.2022.102682

Designing an Interchangeable Multi-Material Nozzle System for the Three-Dimensional Bioprinting Process

Cartwright Nelson, Slesha Tuladhar and Ahasan Habib

Journal of Medical Devices, 2023, 17
DOI: 10.1115/1.4055249

3D bioprinting of microorganisms: principles and applications

Josha Herzog, Lea Franke, Yingyao Lai, Pablo Gomez Rossi, Janina Sachtleben and Dirk Weuster-Botz

Bioprocess Biosyst Eng, 2024, 47, 443
DOI: 10.1007/s00449-023-02965-3

Engineered Potato virus X nanoparticles support hydroxyapatite nucleation for improved bone tissue replacement

Ines Lauria, Christina Dickmeis, Juliane Röder, Malin Beckers, Stephan Rütten, Ying Ying Lin, Ulrich Commandeur and Horst Fischer

Acta Biomaterialia, 2017, 62, 317
DOI: 10.1016/j.actbio.2017.08.039

3D Bioprinting for Tissue and Organ Fabrication

Yu Shrike Zhang, Kan Yue, Julio Aleman, Kamyar Mollazadeh-Moghaddam, Syeda Mahwish Bakht, Jingzhou Yang, Weitao Jia, Valeria Dell’Erba, Pribpandao Assawes, Su Ryon Shin, Mehmet Remzi Dokmeci, Rahmi Oklu and Ali Khademhosseini

Ann Biomed Eng, 2017, 45, 148
DOI: 10.1007/s10439-016-1612-8

Additive Manufacturing of Biomaterials—Design Principles and Their Implementation

Mohammad J. Mirzaali, Vahid Moosabeiki, Seyed Mohammad Rajaai, Jie Zhou and Amir A. Zadpoor

Materials, 2022, 15, 5457
DOI: 10.3390/ma15155457

Flow cytometry as an analytical method of drug-induced apoptosis in 3D bioprinted melanoma cells

Maryke de Villiers and Lissinda H Du Plessis

Biomed. Mater., 2023, 18, 045031
DOI: 10.1088/1748-605X/ace146

Design and characterisation of multi-functional strontium-gelatin nanocomposite bioinks with improved print fidelity and osteogenic capacity

Cesar R. Alcala-Orozco, Isha Mutreja, Xiaolin Cui, Dhiraj Kumar, Gary J. Hooper, Khoon S. Lim and Tim B.F. Woodfield

Bioprinting, 2020, 18, e00073
DOI: 10.1016/j.bprint.2019.e00073

Bioprinting: Uncovering the Utility Layer-By-Layer

Madeline Burke, Benjamin M Carter and Adam W Perriman

J. 3D Print. Med., 2017, 1, 165
DOI: 10.2217/3dp-2017-0006

Modification, 3D printing process and application of sodium alginate based hydrogels in soft tissue engineering: A review

Qinghua Wei, Jiayi Zhou, Yalong An, Mingyang Li, Juan Zhang and Sheng Yang

International Journal of Biological Macromolecules, 2023, 232, 123450
DOI: 10.1016/j.ijbiomac.2023.123450

Melt-Extrusion Additive Manufacturing for Tissue Engineering: Applications and Limitations

Andrea Roberto Calore, Carlos Mota, Katrien Bernaerts, Jules Harings and Lorenzo Moroni

3D Printing and Additive Manufacturing, 2024
DOI: 10.1089/3dp.2023.0104

Cell Encapsulation Systems Toward Modular Tissue Regeneration: From Immunoisolation to Multifunctional Devices

Clara R. Correia, Sara Nadine and João F. Mano

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.201908061

4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials

Yi-Chen Li, Yu Shrike Zhang, Ali Akpek, Su Ryon Shin and Ali Khademhosseini

Biofabrication, 2016, 9, 012001
DOI: 10.1088/1758-5090/9/1/012001

Three-Dimensional Cell Printing of Large-Volume Tissues: Application to Ear Regeneration

Jung-Seob Lee, Byoung Soo Kim, Donghwan Seo, Jeong Hun Park and Dong-Woo Cho

Tissue Engineering Part C: Methods, 2017, 23, 136
DOI: 10.1089/ten.tec.2016.0362

Long-Term Outcome of Sciatic Nerve Regeneration Using Bio3D Conduit Fabricated from Human Fibroblasts in a Rat Sciatic Nerve Model

Maki Ando, Ryosuke Ikeguchi, Tomoki Aoyama, Mai Tanaka, Takashi Noguchi, Yudai Miyazaki, Shizuka Akieda, Koichi Nakayama and Shuichi Matsuda

Cell Transplant, 2021, 30
DOI: 10.1177/09636897211021357

Production of platelet-rich plasma (PRP)-enriched scaffolds for bone tissue regeneration with 3D printing technology

Tufan Arslan Tut, Sumeyye Cesur, Ali Sahin, Fatih Eren and Oguzhan Gunduz

European Polymer Journal, 2024, 219, 113371
DOI: 10.1016/j.eurpolymj.2024.113371

Constructing a 3D printed composite gel using sodium carboxymethylcellulose and gelatin

Zhen Zhang, Bohan Tang, Longtao Zhang and Fuzhen Zhou

Food Hydrocolloids, 2026, 177, 112594
DOI: 10.1016/j.foodhyd.2026.112594

Bioink hydrogel from fish scale gelatin blended with alginate for 3D‐bioprinting application

Sani Boonyagul, Danai Pukasamsombut, Sukanya Pengpanich, Thaman Toobunterng, Kitipong Pasanaphong, Nuankanya Sathirapongsasuti, Tulyapruek Tawonsawatruk, Sutee Wangtueai and Nuttapol Tanadchangsaeng

Food Processing Preservation, 2022, 46
DOI: 10.1111/jfpp.15864

Reprint of: Classification of the printability of selected food for 3D printing: Development of an assessment method using hydrocolloids as reference material

Hyun Woo Kim, Hojae Bae and Hyun Jin Park

Journal of Food Engineering, 2018, 220, 28
DOI: 10.1016/j.jfoodeng.2017.10.023

NK cells encapsulated in micro/macropore-forming hydrogels via 3D bioprinting for tumor immunotherapy

Dahong Kim, Seona Jo, Dongjin Lee, Seok-Min Kim, Ji Min Seok, Seon Ju Yeo, Jun Hee Lee, Jae Jong Lee, Kangwon Lee, Tae-Don Kim and Su A Park

Biomater Res, 2023, 27
DOI: 10.1186/s40824-023-00403-9

The 3D Printing of Calcium Phosphate with K-Carrageenan under Conditions Permitting the Incorporation of Biological Components—A Method

Cindy Kelder, Astrid Diana Bakker, Jenneke Klein-Nulend and Daniël Wismeijer

JFB, 2018, 9, 57
DOI: 10.3390/jfb9040057

Tumor-like lung cancer model based on 3D bioprinting

Xiong Wang, Xinzhi Zhang, Xingliang Dai, Xuanzhi Wang, Xinda Li, Jinfu Diao and Tao Xu

3 Biotech, 2018, 8
DOI: 10.1007/s13205-018-1519-1

Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels

Maria Bercea

Molecules, 2023, 28, 2766
DOI: 10.3390/molecules28062766

Progress in bioprinting technology for tissue regeneration

Alireza Sabzevari, Hossein Rayat Pisheh, Mojtaba Ansari and Amir Salati

J Artif Organs, 2023, 26, 255
DOI: 10.1007/s10047-023-01394-z

Insertion of Vertically Aligned Nanowires into Living Cells by Inkjet Printing of Cells

Donggyu Lee, Daehee Lee, Yulim Won, Hyeonaug Hong, Yongjae Kim, Hyunwoo Song, Jae‐Chul Pyun, Yong Soo Cho, Wonhyoung Ryu and Jooho Moon

Small, 2016, 12, 1446
DOI: 10.1002/smll.201502510

Microbial transglutaminase induced controlled crosslinking of gelatin methacryloyl to tailor rheological properties for 3D printing

Miaomiao Zhou, Bae Hoon Lee, Yu Jun Tan and Lay Poh Tan

Biofabrication, 2019, 11, 025011
DOI: 10.1088/1758-5090/ab063f

Polymeric Bioinks for 3D Hepatic Printing

Joyita Sarkar, Swapnil C. Kamble and Nilambari C. Kashikar

Chemistry, 2021, 3, 164
DOI: 10.3390/chemistry3010014

A highly printable and biocompatible hydrogel composite for direct printing of soft and perfusable vasculature-like structures

Ratima Suntornnond, Edgar Yong Sheng Tan, Jia An and Chee Kai Chua

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-17198-0

Scalable Biofabrication: A Perspective on the Current State and Future Potentials of Process Automation in 3D-Bioprinting Applications

Nils Lindner and Andreas Blaeser

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.855042

Generation of porous starch beads via a 3D food printer: The effects of amylose content and drying technique

Safoura Ahmadzadeh and Ali Ubeyitogullari

Carbohydrate Polymers, 2023, 301, 120296
DOI: 10.1016/j.carbpol.2022.120296

Soft Actuated Hybrid Hydrogel with Bioinspired Complexity to Control Mechanical Flexure Behavior for Tissue Engineering

Ramón Rial, Zhen Liu and Juan M. Ruso

Nanomaterials, 2020, 10, 1302
DOI: 10.3390/nano10071302

Boron nitride nanotubes reinforced gelatin hydrogel-based ink for bioprinting and tissue engineering applications

Akesh Babu Kakarla, Ing Kong, Trang Hong Nguyen, Cin Kong and Helen Irving

Biomaterials Advances, 2022, 141, 213103
DOI: 10.1016/j.bioadv.2022.213103

Three-Dimensional (3-D) Printing Technology Exploited for the Fabrication of Drug Delivery Systems

Farrukh Zeeshan, Thiagarajan Madheswaran, Manisha Pandey and Bapi Gorain

CPD, 2019, 24, 5019
DOI: 10.2174/1381612825666190101111525

Gelatin vs GelMA in alginate-based bioinks as a platform for versatile 3D bioprintable in vitro systems

Alvaro Sanchez-Rubio, Lauren Hope, Eva Barcelona-Estaje, Vineetha Jayawarna, Jonathan Williams and Manuel Salmeron-Sanchez

Biomaterials Advances, 2025, 177, 214408
DOI: 10.1016/j.bioadv.2025.214408

In vitro evaluation of 3D bioprinted tri‐polymer network scaffolds for bone tissue regeneration

Stephanie T. Bendtsen and Mei Wei

J Biomedical Materials Res, 2017, 105, 3262
DOI: 10.1002/jbm.a.36184

Easy and affordable method for rapid prototyping of tissue models in vitro using three-dimensional bioprinting

Ashutosh Bandyopadhyay, Vimal Kumar Dewangan, Kiran Yellappa Vajanthri, Suruchi Poddar and Sanjeev Kumar Mahto

Biocybernetics and Biomedical Engineering, 2018, 38, 158
DOI: 10.1016/j.bbe.2017.12.001

A review on alginate-based bioinks, combination with other natural biomaterials and characteristics

Elika Shams, Mohammad Sadegh Barzad, Sonia Mohamadnia, Omid Tavakoli and Alireza Mehrdadfar

J Biomater Appl, 2022, 37, 355
DOI: 10.1177/08853282221085690

Printable ADA-GEL-based composite inks containing Zn-doped bioactive inorganic fillers for skeletal muscle biofabrication

Hsuan-Heng Lu, Clara Froidevaux, Isabell Biermann, Hana Kaňková, Margitta Büchner, Dirk W. Schubert, Sahar Salehi and Aldo R. Boccaccini

Biomaterials Advances, 2025, 172, 214233
DOI: 10.1016/j.bioadv.2025.214233

Bioplotting Alginate/Hyaluronic Acid Hydrogel Scaffolds with Structural Integrity and Preserved Schwann Cell Viability

Ajay Rajaram, David Schreyer and Daniel Chen

3D Printing and Additive Manufacturing, 2014, 1, 194
DOI: 10.1089/3dp.2014.0006

Advances in tissue engineering of vasculature through three‐dimensional bioprinting

Junjin Zhu, Yuting Wang, Linna Zhong, Fangwei Pan and Jian Wang

Developmental Dynamics, 2021, 250, 1717
DOI: 10.1002/dvdy.385

A New Approach for Fabricating Collagen/ECM‐Based Bioinks Using Preosteoblasts and Human Adipose Stem Cells

Hyeong Jin Lee, Yong Bok Kim, Seung Hyun Ahn, Ji‐Seon Lee, Chul Ho Jang, Hyeon Yoon, Wook Chun and Geun Hyung Kim

Adv Healthcare Materials, 2015, 4, 1359
DOI: 10.1002/adhm.201500193

Gelatin-Based Hydrogels for Organ 3D Bioprinting

Xiaohong Wang, Qiang Ao, Xiaohong Tian, Jun Fan, Hao Tong, Weijian Hou and Shuling Bai

Polymers, 2017, 9, 401
DOI: 10.3390/polym9090401

Towards bioengineered skeletal muscle: recent developmentsin vitroandin vivo

Jinah Jang, Anita Quigley, Catherine Ngan, Kate Firipis, Cathal D. O’Connell, Elena Pirogova, Simon E. Moulton, Richard J. Williams and Robert M.I. Kapsa

Essays in Biochemistry, 2021, 65, 555
DOI: 10.1042/EBC20200149

Development of a novel alginate‐polyvinyl alcohol‐hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds

Stephanie T. Bendtsen, Sean P. Quinnell and Mei Wei

J Biomedical Materials Res, 2017, 105, 1457
DOI: 10.1002/jbm.a.36036

Bioinspired 3D printable pectin-nanocellulose ink formulations

Alexandra I. Cernencu, Adriana Lungu, Izabela-Cristina Stancu, Andrada Serafim, Ellinor Heggset, Kristin Syverud and Horia Iovu

Carbohydrate Polymers, 2019, 220, 12
DOI: 10.1016/j.carbpol.2019.05.026

Biofabrication of skin tissue constructs using alginate, gelatin and diethylaminoethyl cellulose bioink

Lakshmi T. Somasekharan, Riya Raju, Suvanish Kumar, Rency Geevarghese, Renjith P. Nair, Naresh Kasoju and Anugya Bhatt

International Journal of Biological Macromolecules, 2021, 189, 398
DOI: 10.1016/j.ijbiomac.2021.08.114

Versatility on demand – The case for semi-solid micro-extrusion in pharmaceutics

Jhinuk Rahman and Julian Quodbach

Advanced Drug Delivery Reviews, 2021, 172, 104
DOI: 10.1016/j.addr.2021.02.013

3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines

Claudia Di Bella, Amanda Fosang, Davide M. Donati, Gordon G. Wallace and Peter F. M. Choong

Front. Surg., 2015, 2
DOI: 10.3389/fsurg.2015.00039

Review of alginate-based hydrogel bioprinting for application in tissue engineering

Prasansha Rastogi and Balasubramanian Kandasubramanian

Biofabrication, 2019, 11, 042001
DOI: 10.1088/1758-5090/ab331e

3D Printing Applied to Tissue Engineered Vascular Grafts

Raphaël Wenger and Marie-Noëlle Giraud

Applied Sciences, 2018, 8, 2631
DOI: 10.3390/app8122631

In vitro characterisation of 3D printed platelet lysate-based bioink for potential application in skin tissue engineering

Luciana Y. Daikuara, Zhilian Yue, Danielle Skropeta and Gordon G. Wallace

Acta Biomaterialia, 2021, 123, 286
DOI: 10.1016/j.actbio.2021.01.021

Enhancing Bone Grafts: Unveiling the Degradation Behaviour of Poly (lactic‑co‑glycolic acid) ‑ Calcium Composites for Advanced Bone Repair

Norshazliza Ab Ghani, Sathiya Maran, Mohammed Rafiq Abdul Kadir, Shanmathy Somasundaram, Hanumantha Rao Balaji Raghavendran and Tunku Kamarul Zaman

Journal of Biomaterials Science, Polymer Edition, 2025, 36, 1611
DOI: 10.1080/09205063.2025.2460370

3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking

D Petta, A R Armiento, D Grijpma, M Alini, D Eglin and M D’Este

Biofabrication, 2018, 10, 044104
DOI: 10.1088/1758-5090/aadf58

Nanocellulose-based porous materials: Regulation and pathway to commercialization in regenerative medicine

Filipe V. Ferreira, Alana G. Souza, Rubina Ajdary, Lucas P. de Souza, João H. Lopes, Daniel S. Correa, Gilberto Siqueira, Hernane S. Barud, Derval dos S. Rosa, Luiz H.C. Mattoso and Orlando J. Rojas

Bioactive Materials, 2023, 29, 151
DOI: 10.1016/j.bioactmat.2023.06.020

Three-Dimensional Bioprinting in Vascular Tissue Engineering and Tissue Vascularization of Cardiovascular Diseases

Ben Omondi Ochieng, Leqian Zhao and Zhiyi Ye

Tissue Engineering Part B: Reviews, 2024, 30, 340
DOI: 10.1089/ten.teb.2023.0175

Poloxamer Hydrogels for Biomedical Applications

Eleonora Russo and Carla Villa

Pharmaceutics, 2019, 11, 671
DOI: 10.3390/pharmaceutics11120671

Prediction of Clinical Precision Chemotherapy by Patient‐Derived 3D Bioprinting Models of Colorectal Cancer and Its Liver Metastases

Hang Sun, Lejia Sun, Xindi Ke, Lijuan Liu, Changcan Li, Bao Jin, Peipei Wang, Zhuoran Jiang, Hong Zhao, Zhiying Yang, Yongliang Sun, Jianmei Liu, Yan Wang, Minghao Sun, Mingchang Pang, Yinhan Wang, Bin Wu, Haitao Zhao, Xinting Sang, Baocai Xing, Huayu Yang, Pengyu Huang and Yilei Mao

Advanced Science, 2024, 11
DOI: 10.1002/advs.202304460

3-dimensional (3D) fabricated polymer based drug delivery systems

Simon E. Moulton and Gordon G. Wallace

Journal of Controlled Release, 2014, 193, 27
DOI: 10.1016/j.jconrel.2014.07.005

Nanocrystalline Cellulose as a Versatile Engineering Material for Extrusion-Based Bioprinting

Sophia A. Read, Chee Shuen Go, Miguel J. S. Ferreira, Cosimo Ligorio, Susan J. Kimber, Ahu G. Dumanli and Marco A. N. Domingos

Pharmaceutics, 2023, 15, 2432
DOI: 10.3390/pharmaceutics15102432

An Experimental Study on the Mechanical and Biological Properties of Bio-Printed Alginate/Halloysite Nanotube/Methylcellulose/Russian Olive-Based Scaffolds

Babak Roshangar Zineh, Mohammad Reza Shabgard and Leila Roshangar

Adv Pharm Bull, 2018, 8, 643
DOI: 10.15171/apb.2018.073

Research on the printability of hydrogels in 3D bioprinting

Yong He, FeiFei Yang, HaiMing Zhao, Qing Gao, Bing Xia and JianZhong Fu

Sci Rep, 2016, 6
DOI: 10.1038/srep29977

Digital Assembly of Spherical Viscoelastic Bio‐Ink Particles

Jinchang Zhu, Yi He, Linlin Kong, Zhijian He, Kaylen Y. Kang, Shannon P. Grady, Leander Q. Nguyen, Dong Chen, Yong Wang, Jose Oberholzer and Li‐Heng Cai

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202109004

Bioinks for bioprinting functional meniscus and articular cartilage

Susan E Critchley and Daniel J Kelly

J. 3D Print. Med., 2017, 1, 269
DOI: 10.2217/3dp-2017-0012

Trends in 3D bioprinting for esophageal tissue repair and reconstruction

Wissam Farhat, François Chatelain, Auriane Marret, Lionel Faivre, Lousineh Arakelian, Pierre Cattan and Alexandra Fuchs

Biomaterials, 2021, 267, 120465
DOI: 10.1016/j.biomaterials.2020.120465

Rheological Characteristics of 2D Titanium Carbide (MXene) Dispersions: A Guide for Processing MXenes

Bilen Akuzum, Kathleen Maleski, Babak Anasori, Pavel Lelyukh, Nicolas Javier Alvarez, E. Caglan Kumbur and Yury Gogotsi

ACS Nano, 2018, 12, 2685
DOI: 10.1021/acsnano.7b08889

Xeno-Free 3D Bioprinted Liver Model for Hepatotoxicity Assessment

Ahmed S. M. Ali, Johanna Berg, Viola Roehrs, Dongwei Wu, Johannes Hackethal, Albert Braeuning, Lisa Woelken, Cornelia Rauh and Jens Kurreck

IJMS, 2024, 25, 1811
DOI: 10.3390/ijms25031811

Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review

Ahmed Fatimi, Oseweuba Valentine Okoro, Daria Podstawczyk, Julia Siminska-Stanny and Amin Shavandi

Gels, 2022, 8, 179
DOI: 10.3390/gels8030179

Evaluation of bioink printability for bioprinting applications

Zhengyi Zhang, Yifei Jin, Jun Yin, Changxue Xu, Ruitong Xiong, Kyle Christensen, Bradley R. Ringeisen, Douglas B. Chrisey and Yong Huang

Applied Physics Reviews, 2018, 5
DOI: 10.1063/1.5053979

Engineering alginate as bioink for bioprinting

Jia Jia, Dylan J. Richards, Samuel Pollard, Yu Tan, Joshua Rodriguez, Richard P. Visconti, Thomas C. Trusk, Michael J. Yost, Hai Yao, Roger R. Markwald and Ying Mei

Acta Biomaterialia, 2014, 10, 4323
DOI: 10.1016/j.actbio.2014.06.034

Hybprinting for musculoskeletal tissue engineering

Jiannan Li, Carolyn Kim, Chi-Chun Pan, Aaron Babian, Elaine Lui, Jeffrey L. Young, Seyedsina Moeinzadeh, Sungwoo Kim and Yunzhi Peter Yang

iScience, 2022, 25, 104229
DOI: 10.1016/j.isci.2022.104229

Silk fibroin reactive inks for 3D printing crypt-like structures

Danielle L Heichel, Julia A Tumbic, Marisa E Boch, Anson W K Ma and Kelly A Burke

Biomed. Mater., 2020, 15, 055037
DOI: 10.1088/1748-605X/ab99d4

Bioprinting functional tissues

Ashley N. Leberfinger, Shantanab Dinda, Yang Wu, Srinivas V. Koduru, Veli Ozbolat, Dino J. Ravnic and Ibrahim T. Ozbolat

Acta Biomaterialia, 2019, 95, 32
DOI: 10.1016/j.actbio.2019.01.009

In vitro 3D skin culture and its sustainability in toxicology: a narrative review

Syafira Masri, Mh Busra Fauzi, Nor Fadilah Rajab, Wing-Hin Lee, Diana Atiqah Zainal Abidin and Ee Ling Siew

Artificial Cells, Nanomedicine, and Biotechnology, 2024, 52, 476
DOI: 10.1080/21691401.2024.2407617

A bioprinted composite hydrogel with controlled shear stress on cells

Amirhossein Bakhtiiari, Rezvan Khorshidi, Fatemeh Yazdian, Hamid Rashedi and Meisam Omidi

Proc Inst Mech Eng H, 2021, 235, 314
DOI: 10.1177/0954411920976682

4D printing: Recent advances and proposals in the food sector

Xiuxiu Teng, Min Zhang and Arun S. Mujumdar

Trends in Food Science & Technology, 2021, 110, 349
DOI: 10.1016/j.tifs.2021.01.076

Phage as versatile nanoink for printing 3-D cell-laden scaffolds

Doe-Young Lee, Hyeongjin Lee, YongBok Kim, So Young Yoo, Woo-Jae Chung and GeunHyung Kim

Acta Biomaterialia, 2016, 29, 112
DOI: 10.1016/j.actbio.2015.10.004

Assessing bioink shape fidelity to aid material development in 3D bioprinting

A Ribeiro, M M Blokzijl, R Levato, C W Visser, M Castilho, W E Hennink, T Vermonden and J Malda

Biofabrication, 2017, 10, 014102
DOI: 10.1088/1758-5090/aa90e2

Recent advances in high-strength and elastic hydrogels for 3D printing in biomedical applications

Cancan Xu, Guohao Dai and Yi Hong

Acta Biomaterialia, 2019, 95, 50
DOI: 10.1016/j.actbio.2019.05.032

A versatile bioink for three-dimensional printing of cellular scaffolds based on thermally and photo-triggered tandem gelation

Matti Kesti, Michael Müller, Jana Becher, Matthias Schnabelrauch, Matteo D’Este, David Eglin and Marcy Zenobi-Wong

Acta Biomaterialia, 2015, 11, 162
DOI: 10.1016/j.actbio.2014.09.033

Biofabrication of the osteochondral unit and its applications: Current and future directions for 3D bioprinting

Patricia Santos-Beato, Swati Midha, Andrew A Pitsillides, Aline Miller, Ryo Torii and Deepak M Kalaskar

J Tissue Eng, 2022, 13
DOI: 10.1177/20417314221133480

Rheological characterization of cell-laden alginate-gelatin hydrogels for 3D biofabrication

Tyler Gregory, Prateek Benhal, Annie Scutte, David Quashie, Kiram Harrison, Casey Cargill, Saliya Grandison, Mary Jean Savitsky, Subramanian Ramakrishnan and Jamel Ali

Journal of the Mechanical Behavior of Biomedical Materials, 2022, 136, 105474
DOI: 10.1016/j.jmbbm.2022.105474

Sodium alginate from Playa del Carmen Sargassum: extraction, characterization, and rheological analysis of solutions and hydrogels

Frank Manuel León-Martínez, Luis Medina-Torres, Delia Soto-Castro, Francisco Castellanos-León, Claudia Hernández-Plancarte and Prisciliano Felipe de Jesús Cano-Barrita

International Journal of Biological Macromolecules, 2025, 317, 144803
DOI: 10.1016/j.ijbiomac.2025.144803

Solvent types used for the preparation of hydrogels determine their mechanical properties and influence cell viability through gelatine and calcium ions release

Karolina Rosińska, Mateusz Bartniak, Adrianna Wierzbicka, Anna Sobczyk‐Guzenda and Dorota Bociaga

J Biomed Mater Res, 2023, 111, 314
DOI: 10.1002/jbm.b.35152

Cell-based clinical and experimental methods for assisting the function of impaired livers – Present and future of liver support systems

Krzysztof Dariusz Pluta, Malgorzata Ciezkowska, Monika Wisniewska, Agnieszka Wencel and Dorota Genowefa Pijanowska

Biocybernetics and Biomedical Engineering, 2021, 41, 1322
DOI: 10.1016/j.bbe.2021.06.005

3D Printing and Bioprinting to Model Bone Cancer: The Role of Materials and Nanoscale Cues in Directing Cell Behavior

Tiziana Fischetti, Gemma Di Pompo, Nicola Baldini, Sofia Avnet and Gabriela Graziani

Cancers, 2021, 13, 4065
DOI: 10.3390/cancers13164065

Lightweight 3D bioprinting with point by point photocuring

Peng Zhang, Haoxuan Wang, Peng Wang, Yating Zheng, Linxiang Liu, Jun Hu, Yande Liu, Qing Gao and Yong He

Bioactive Materials, 2021, 6, 1402
DOI: 10.1016/j.bioactmat.2020.10.023

Three-dimensional printing of alginate-gelatin-agar scaffolds using free-form motor assisted microsyringe extrusion system

Waeljumah Aljohani, Muhammad Wajid Ullah, Wenchao Li, Lei Shi, Xianglin Zhang and Guang Yang

J Polym Res, 2018, 25
DOI: 10.1007/s10965-018-1455-0

Peptide-functionalized hydrocolloid bioink for 3D bioprinting in dental tissue engineering

Elif Güner, Özüm Yildirim-Semerci, Zeynep Altan and Ahu Arslan-Yildiz

International Journal of Biological Macromolecules, 2025, 330, 148016
DOI: 10.1016/j.ijbiomac.2025.148016

3D bioprinting of complex biological structures with tunable elastic modulus and porosity using freeform reversible embedding of suspended hydrogels

Zhuang Chen, Chuanzhen Huang, Hanlian Liu, Xu Han, Zhichao Wang, Shuying Li, Jun Huang and Zhen Wang

Bio-des. Manuf., 2023, 6, 550
DOI: 10.1007/s42242-023-00251-5

Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting

Michael Di Giuseppe, Nicholas Law, Braeden Webb, Ryley A. Macrae, Lawrence J. Liew, Timothy B. Sercombe, Rodney J. Dilley and Barry J. Doyle

Journal of the Mechanical Behavior of Biomedical Materials, 2018, 79, 150
DOI: 10.1016/j.jmbbm.2017.12.018

Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors

Huan Chen, Fengwei Xie, Ling Chen and Bo Zheng

Journal of Food Engineering, 2019, 244, 150
DOI: 10.1016/j.jfoodeng.2018.09.011

Machine Learning in Gel-Based Additive Manufacturing: From Material Design to Process Optimization

Zhizhou Zhang, Yaxin Wang and Weiguang Wang

Gels, 2025, 11, 582
DOI: 10.3390/gels11080582

Employing a combination of direct ink writing and near-infrared-induced photopolymerization facilitates 3D printing of unsupported multi-scale ceramics: The bone tissue engineering approach

Yongjie Qi, Hangying Lv, Qinghua Huang and Guangyong Pan

European Polymer Journal, 2024, 213, 113133
DOI: 10.1016/j.eurpolymj.2024.113133

Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks

Johan Göhl, Kajsa Markstedt, Andreas Mark, Karl Håkansson, Paul Gatenholm and Fredrik Edelvik

Biofabrication, 2018, 10, 034105
DOI: 10.1088/1758-5090/aac872

3D Bioprinting in Skeletal Muscle Tissue Engineering

Serge Ostrovidov, Sahar Salehi, Marco Costantini, Kasinan Suthiwanich, Majid Ebrahimi, Ramin Banan Sadeghian, Toshinori Fujie, Xuetao Shi, Stefano Cannata, Cesare Gargioli, Ali Tamayol, Mehmet Remzi Dokmeci, Gorka Orive, Wojciech Swieszkowski and Ali Khademhosseini

Small, 2019, 15
DOI: 10.1002/smll.201805530

Systematic development and bioprinting of novel nanostructured multi-material bioinks for bone tissue engineering

Jannika T Korkeamäki, Ahmad Rashad, Miina Ojansivu, Jennika Karvinen, Janne T Koivisto, Kristin Syverud, Minna Kellomäki, Susanna Miettinen and Kamal Mustafa

Biofabrication, 2025, 17, 025005
DOI: 10.1088/1758-5090/ada63b

Three-dimensional bio-printing

Qi Gu, Jie Hao, YangJie Lu, Liu Wang, Gordon G. Wallace and Qi Zhou

Sci. China Life Sci., 2015, 58, 411
DOI: 10.1007/s11427-015-4850-3

Fibrinogen-Based Bioink for Application in Skin Equivalent 3D Bioprinting

Aida Cavallo, Tamer Al Kayal, Angelica Mero, Andrea Mezzetta, Lorenzo Guazzelli, Giorgio Soldani and Paola Losi

JFB, 2023, 14, 459
DOI: 10.3390/jfb14090459

Enhanced Electroactivity, Mechanical Properties, and Printability through the Addition of Graphene Oxide to Photo-Cross-linkable Gelatin Methacryloyl Hydrogel

Alexandre Xavier Mendes, Saimon Moraes Silva, Cathal D. O’Connell, Serena Duchi, Anita F. Quigley, Robert M. I. Kapsa and Simon E. Moulton

ACS Biomater. Sci. Eng., 2021, 7, 2279
DOI: 10.1021/acsbiomaterials.0c01734

3D bioprinted rat Schwann cell-laden structures with shape flexibility and enhanced nerve growth factor expression

Xinda Li, Xiong Wang, Xuanzhi Wang, Hongqing Chen, Xinzhi Zhang, Lian Zhou and Tao Xu

3 Biotech, 2018, 8
DOI: 10.1007/s13205-018-1341-9

On the reproducibility of extrusion-based bioprinting: round robin study on standardization in the field

David Grijalva Garces, Svenja Strauß, Sarah Gretzinger, Barbara Schmieg, Tomasz Jüngst, Jürgen Groll, Lorenz Meinel, Isabelle Schmidt, Hanna Hartmann, Katja Schenke-Layland, Nico Brandt, Michael Selzer, Stefan Zimmermann, Peter Koltay, Alexander Southan, Günter E M Tovar, Sarah Schmidt, Achim Weber, Tilman Ahlfeld, Michael Gelinsky, Thomas Scheibel, Rainer Detsch, Aldo R Boccaccini, Toufik Naolou, Cornelia Lee-Thedieck, Christian Willems, Thomas Groth, Stephan Allgeier, Bernd Köhler, Tiaan Friedrich, Heiko Briesen, Janine Buchholz, Dietrich Paulus, Anselm von Gladiss and Jürgen Hubbuch

Biofabrication, 2024, 16, 015002
DOI: 10.1088/1758-5090/acfe3b

Cell-Laden Biomimetically Mineralized Shark-Skin-Collagen-Based 3D Printed Hydrogels for the Engineering of Hard Tissues

Gabriela S. Diogo, Catarina F. Marques, Carmen G. Sotelo, Ricardo I. Pérez-Martín, Rogério P. Pirraco, Rui L. Reis and Tiago H. Silva

ACS Biomater. Sci. Eng., 2020, 6, 3664
DOI: 10.1021/acsbiomaterials.0c00436

Machine learning-based design strategy for 3D printable bioink: elastic modulus and yield stress determine printability

Jooyoung Lee, Seung Ja Oh, Sang Hyun An, Wan-Doo Kim and Sang-Heon Kim

Biofabrication, 2020, 12, 035018
DOI: 10.1088/1758-5090/ab8707

Biomaterials for Bioprinting Microvasculature

Ryan W. Barrs, Jia Jia, Sophia E. Silver, Michael Yost and Ying Mei

Chem. Rev., 2020, 120, 10887
DOI: 10.1021/acs.chemrev.0c00027