Issue 9, 2022

Determination of elements in sandstone using laser-induced breakdown spectroscopy assisted by the laser fusion method

Abstract

Laser-induced breakdown spectroscopy (LIBS) is prevalent in the direct qualitative and quantitative analysis of rock samples. However, for sandstone samples with high SiO2 content (about 90%), it is difficult to prepare samples and they perform poorly in quantitative analysis. Here, a laser fusion pre-treatment method of sandstone samples for quantitative analysis in LIBS is proposed. The laser fusion method uses a quasi-continuous pulse laser with a high frequency (50 kHz) to interact with the sandstone powder sample in a short time (20 seconds), making the sandstone powder sample through a heating, fusing, cooling, and solidification process, to obtain glass beads of a more stable physical matrix. The results of LIBS spectral data obtained by the laser fusion method and traditional pellet method were compared. For certified reference materials (CRMs), the linearity of calibration curves of elements (Al, Ba, Ca, Fe, Mg, Sr, K, and Na) by the laser fusion method (R2 = 0.903–0.980) is better than that of the pellet method (R2 = 0.275–0.863). Not only were the detection limits of laser fused samples (0.7–104.7 ppm) lower than those of pellet samples (4.5–377.6 ppm), but the relative standard deviations (RSD) of spectral signal intensity of the laser fused samples ranged from 1% to 10%, which was about one-third of that of pellet samples on average. Therefore, the glass beads with high uniformity, flatness, and hardness obtained by the laser fusion method are conducive to signal detection of LIBS technology, which can effectively improve the stability of the signal and the precision of detection results.

Graphical abstract: Determination of elements in sandstone using laser-induced breakdown spectroscopy assisted by the laser fusion method

Article information

Article type
Paper
Submitted
28 Feb. 2022
Accepted
15 Jun. 2022
First published
01 Jul. 2022

J. Anal. At. Spectrom., 2022,37, 1855-1861

Determination of elements in sandstone using laser-induced breakdown spectroscopy assisted by the laser fusion method

R. Zheng, M. Wu, L. Zeng, Y. Rao, S. Chen, X. He, H. Pei, X. Wang and Y. Duan, J. Anal. At. Spectrom., 2022, 37, 1855 DOI: 10.1039/D2JA00071G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements