Issue 12, 2020

Exploring new hydrated delta type vanadium oxides for lithium intercalation

Abstract

Three hydrated double layered vanadium oxides, namely Na0.35V2O5·0.8(H2O), K0.36(H3O)0.15V2O5 and (NH4)0.37V2O5·0.15(H2O), were obtained by using mild hydrothermal conditions. Their delta type structural frameworks were solved by high-resolution synchrotron X-ray powder diffraction and the interlayer spacings were interpreted from difference Fourier maps. The inter-slab distances are modulated by the water content and the special arrangements of the alkali and ammonium cations. The XPS measurements denote mixed valence systems with high contents of V4+ ions up to 40%. The monitoring of the V4+ EPR signal over time suggests a reduction of the electronic delocalization on account of the partial oxidation to V5+. The electrochemical performance of the active phases is strongly conditioned by the vacuum-drying process of the electrodes, showing better capacity retention when vacuum is not applied. In situ X-ray diffraction shows a structural mechanism of contraction/expansion of the bilayers upon lithium insertion/extraction where the alkali ions behave as structural stabilizers. Galvanostatic cycling at very low current density implies migration of the alkali “pillars” triggering the collapse of the structure.

Graphical abstract: Exploring new hydrated delta type vanadium oxides for lithium intercalation

Supplementary files

Article information

Article type
Paper
Submitted
18 Dit 2019
Accepted
10 Kax 2019
First published
10 Kax 2019

Dalton Trans., 2020,49, 3856-3868

Exploring new hydrated delta type vanadium oxides for lithium intercalation

J. Orive, R. Fernández de Luis, E. S. Larrea, A. Martínez-Amesti, A. Altomare, R. Rizzi, L. Lezama, M. I. Arriortua, J. L. Gómez-Cámer, M. Jauregui, M. Casas-Cabanas and J. Lisoni, Dalton Trans., 2020, 49, 3856 DOI: 10.1039/C9DT04088A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements