Issue 2, 2024

A versatile test system to determine nanomaterial heteroagglomeration attachment efficiency

Abstract

Engineered and incidental nanomaterials are emerging contaminants of environmental concern. In aquatic systems, their transport, fate, and bioavailability strongly depend on heteroagglomeration with natural suspended particulate matter (SPM). Since particulate contaminants are governed by different mechanisms than dissolved contaminants, harmonized, particle-specific test systems and protocols are needed for environmental risk assessment and for the comparability of environmental fate studies. The heteroagglomeration attachment efficiency (αhet) can parametrize heteroagglomeration in fate models which inform exposure assessment. It describes the attachment probability upon nanomaterial–SPM collision and reflects the physicochemical affinity between their surfaces. This work introduces a new versatile test system to determine αhet under environmentally relevant conditions. The test matrix combines model SPM analogs and an adjustable model hydrochemistry, both designed to represent the process-relevant characteristics of natural freshwater systems, while being standardizable and reproducible. We developed a stirred-batch method that addresses shortcomings of existing strategies for αhet determination and conducted heteroagglomeration experiments with CeO2 (<25 nm) as a model nanomaterial. Single-particle ICP-MS allowed working at environmentally relevant concentrations and determination of αhet values by following the decrease of non-reacted nanomaterial over time. The αhet values received for the model freshwater test matrix were evaluated against a natural river-water sample. Almost identical αhet values show that the model test system adequately reflects the natural system, and the experimental setup proved to be robust and in line with the theoretical concept for αhet determination. Combinations of natural SPM in model water and model SPM in natural water allowed further insight into their respective impacts. The αhet values determined for nano-CeO2 in the natural river water sample (0.0044–0.0051) translate to a travel distance of 143–373 km downstream until 50% is heteroagglomerated, assuming an average flow velocity of 5 km h−1, an SPM concentration of 20–45 mg L−1, and experimental mixing conditions (i.e., G ∼ 97 s−1). These half-lives illustrate the importance of heteroagglomeration kinetics.

Graphical abstract: A versatile test system to determine nanomaterial heteroagglomeration attachment efficiency

Supplementary files

Article information

Article type
Paper
Submitted
16 Cig 2023
Accepted
25 Qas 2023
First published
28 Qas 2023
This article is Open Access
Creative Commons BY-NC license

Environ. Sci.: Nano, 2024,11, 588-600

A versatile test system to determine nanomaterial heteroagglomeration attachment efficiency

H. Walch, N. Bašić, A. Praetorius, F. von der Kammer and T. Hofmann, Environ. Sci.: Nano, 2024, 11, 588 DOI: 10.1039/D3EN00161J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements