Issue 48, 2023

Silver sulfide thin film solar cells: materials, fabrication methods, devices, and challenges

Abstract

Photovoltaic (PV) technology provides a sustainable solution to meet the increasing energy demands from society. Silver sulfide (Ag2S), a direct bandgap PV material, is considered a promising semiconductor due to its excellent optical and electrical properties, including high theoretical efficiency (∼30%), tunable bandgap (Eg = 0.9–1.1 eV), high thermodynamic stability, low toxicity, abundant elemental availability, and low fabrication cost. Despite efforts to improve the photovoltaic conversion efficiency of Ag2S devices through various approaches such as film deposition techniques, device structures, and interface optimization, the quality of the absorber layer, structural defects, and non-ideal charge separation at the interfaces remain obstacles for further performance enhancement. Therefore, it is crucial to gain a deeper understanding of the fabrication methods, optoelectronic properties, and efficiency loss mechanisms of Ag2S solar cells to achieve rapid advancements in device performance. This review summarizes the current research status on the fabrication methods, device structure selection, design, and optimization of Ag2S thin films. Finally, insights into achieving high-efficiency Ag2S devices by improving the crystallinity of the absorber layer and reducing interface defects are discussed.

Graphical abstract: Silver sulfide thin film solar cells: materials, fabrication methods, devices, and challenges

Article information

Article type
Review Article
Submitted
14 Way 2023
Accepted
10 Xim 2023
First published
14 Xim 2023

J. Mater. Chem. C, 2023,11, 16842-16858

Silver sulfide thin film solar cells: materials, fabrication methods, devices, and challenges

W. Dong, J. Fu, J. Yang, S. Ren, H. Zhu, Y. Wang, J. Hao, Y. Zhang and Z. Zheng, J. Mater. Chem. C, 2023, 11, 16842 DOI: 10.1039/D3TC03341D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements