Issue 7, 2020

Non-toxic green food additive enables efficient polymer solar cells through adjusting the phase composition distribution and boosting charge transport

Abstract

Solvent additives play an important role in optimizing the morphology of the photoactive layer and improving the photovoltaic performance of polymer solar cells (PSCs). However, the toxicity of common additives to the environment limits their further application in photovoltaic cells. Herein, a non-toxic green food additive, benzyl salicylate (BS), was introduced as a novel solvent additive into inverted PSCs based on ITO/ZnO/PTB7-Th:PC71BM/MoO3/Ag. Subsequently, the effect of BS on the photovoltaic performance was studied, and the best power conversion efficiency (PCE) of 9.43% was achieved when adding 2% BS into the photoactive layer of PSCs. Furthermore, the PSCs treated by 1–4% BS all exhibited good photovoltaic performance compared to that using 3% DIO (8.56%), which demonstrated that the universality was very strong. In addition, a good solubility for fullerenes was presented on BS like DIO, which was determined by atomic force microscopy and transmission electron microscopy. The water contact angle and time-off flight secondary ion mass spectroscopy results manifested that the good solubility of high-boiling-point additive BS to PC71BM could boost the phase composition distribution at the surface and in the vertical direction. Thus, an efficient route for exciton dissociation and charge transfer could be formed when the PSC was processed via 2% BS, which could also be ascertained by space charge limited current, impedance spectroscopy. The present research findings provide useful information for realizing large-area PSC fabrication, where a greener non-toxic additive is always preferred.

Graphical abstract: Non-toxic green food additive enables efficient polymer solar cells through adjusting the phase composition distribution and boosting charge transport

Supplementary files

Article information

Article type
Paper
Submitted
01 Kax 2019
Accepted
03 Qun 2020
First published
06 Qun 2020

J. Mater. Chem. C, 2020,8, 2483-2490

Non-toxic green food additive enables efficient polymer solar cells through adjusting the phase composition distribution and boosting charge transport

J. Li, Y. Wang, Z. Liang, J. Qin, M. Ren, J. Tong, C. Yang, C. Yang, X. Bao and Y. Xia, J. Mater. Chem. C, 2020, 8, 2483 DOI: 10.1039/C9TC06571G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements