Issue 38, 2020

A new metalorganic chemical vapor deposition process for MoS2 with a 1,4-diazabutadienyl stabilized molybdenum precursor and elemental sulfur

Abstract

Molybdenum disulfide (MoS2) is known for its versatile properties and hence is promising for a wide range of applications. The fabrication of high quality MoS2 either as homogeneous films or as two-dimensional layers on large areas is thus the objective of intense research. Since industry requirements on MoS2 thin films can hardly be matched by established exfoliation fabrication methods, there is an enhanced need for developing new chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes where a rational precursor selection is a crucial step. In this study, a new molybdenum precursor, namely 1,4-di-tert-butyl-1,4-diazabutadienyl-bis(tert-butylimido)molybdenum(VI) [Mo(NtBu)2(tBu2DAD)], is identified as a potential candidate. The combination of imido and chelating 1,4-diazadieneyl ligand moieties around the molybdenum metal center results in a monomeric compound possessing adequate thermal characteristics relevant for vapor phase deposition applications. Hexagonal MoS2 layers are fabricated in a metalorganic CVD (MOCVD) process with elemental sulfur as the co-reactant at temperatures between 600 °C and 800 °C. The structure and composition of the films are investigated by X-ray diffraction, high resolution transmission electron microscopy, synchrotron X-ray photoelectron spectroscopy and Raman spectroscopy revealing crystalline and stoichiometric MoS2 films. The new MOCVD process developed for MoS2 is highly promising due to its moderate process conditions, scalability and controlled targeted composition.

Graphical abstract: A new metalorganic chemical vapor deposition process for MoS2 with a 1,4-diazabutadienyl stabilized molybdenum precursor and elemental sulfur

Supplementary files

Article information

Article type
Paper
Submitted
13 Qad 2020
Accepted
26 Leq 2020
First published
28 Leq 2020

Dalton Trans., 2020,49, 13462-13474

A new metalorganic chemical vapor deposition process for MoS2 with a 1,4-diazabutadienyl stabilized molybdenum precursor and elemental sulfur

J. Wree, E. Ciftyurek, D. Zanders, N. Boysen, A. Kostka, D. Rogalla, M. Kasischke, A. Ostendorf, K. Schierbaum and A. Devi, Dalton Trans., 2020, 49, 13462 DOI: 10.1039/D0DT02471F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements