Issue 34, 2020

CuO/La0.5Sr0.5CoO3: precursor of efficient NO reduction catalyst studied by operando high energy X-ray diffraction under three-way catalytic conditions

Abstract

Substitution of critical raw materials such as platinum group metals in automotive catalysts is challenging. In this work we prepared a nanocomposite in which CuO nanoparticles are highly dispersed on a La0.5Sr0.5CoO3 perovskite-type oxide. The behaviour and reactivity under three way catalyst conditions was monitored by operando time-resolved high-energy X-ray diffraction under oscillating rich/lean feed. The reducing environment converted CuO into Cu(0) in a two step process: Cu(II) to Cu(I) and to Cu(0), while the perovskite evolved to an oxygen deficient brownmillerite phase. These structural transformations are shown to be crucial for catalytic activity. The in situ generated Cu(0)/Cu(I)/brownmillerite nanocomposite is active for NO reduction above 300 °C, reaching 90% NO conversion at 450 °C. The effect of feed composition on the diffraction patterns was studied by Rietveld refinement in order to rationalize the experimental observations under TWC conditions.

Graphical abstract: CuO/La0.5Sr0.5CoO3: precursor of efficient NO reduction catalyst studied by operando high energy X-ray diffraction under three-way catalytic conditions

Article information

Article type
Paper
Submitted
25 Nah 2020
Accepted
14 Cax 2020
First published
14 Cax 2020

Phys. Chem. Chem. Phys., 2020,22, 18798-18805

CuO/La0.5Sr0.5CoO3: precursor of efficient NO reduction catalyst studied by operando high energy X-ray diffraction under three-way catalytic conditions

I. Alxneit, A. Garbujo, G. Carollo, D. Ferri and A. Glisenti, Phys. Chem. Chem. Phys., 2020, 22, 18798 DOI: 10.1039/D0CP01064B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements