Issue 41, 2019

Tin nanoparticles embedded in a carbon buffer layer as preferential nucleation sites for stable sodium metal anodes

Abstract

Sodium (Na) metal is one of the most appealing anode materials for grid-scale energy storage systems owing to the high earth abundance and low cost of Na resources. Nevertheless, the implementation of the Na metal anode is hindered by two primary issues associated with Na dendrite growth and volume expansion, resulting in low coulombic efficiency and poor cycle life. Herein we present a facile and scalable method to synthesize tin (Sn) nanoparticles (NPs) that are uniformly embedded within a carbon network (denoted as Sn@C composite), which can address the two issues simultaneously. Specifically, Sn NPs can serve as preferential nucleation sites to guide Na nucleation and thereby lower the Na deposition overpotential, while the carbon network can act as a buffer layer to effectively minimize the volume change and alleviate the exfoliation of Sn NPs over repeated cycles. Consequently, high-capacity Na anodes can be realized with long-term reversibility and stability. Moreover, a room-temperature Na–sulfur battery based on the Sn@C composite as an anode coupled with commercial sodium sulfide as a cathode was demonstrated to have significantly improved electrochemical performance. We believe that this work provides a new pathway for designing high-energy Na metal batteries.

Graphical abstract: Tin nanoparticles embedded in a carbon buffer layer as preferential nucleation sites for stable sodium metal anodes

Supplementary files

Article information

Article type
Communication
Submitted
16 Cax 2019
Accepted
01 Qad 2019
First published
01 Qad 2019

J. Mater. Chem. A, 2019,7, 23747-23755

Author version available

Tin nanoparticles embedded in a carbon buffer layer as preferential nucleation sites for stable sodium metal anodes

H. Wang, E. Matios, C. Wang, J. Luo, X. Lu, X. Hu, Y. Zhang and W. Li, J. Mater. Chem. A, 2019, 7, 23747 DOI: 10.1039/C9TA05176G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements