Issue 22, 2019

Fabrication of an antibiotic-sensitive 2D-molecularly imprinted photonic crystal

Abstract

A molecularly imprinted colloidal array (MICA) for the detection of clindamycin hydrochloride (CLI) was prepared by embedding a two-dimensional (2D) polystyrene crystalline colloidal array within a CLI-imprinted hydrogel. The MICA showed a significant response to CLI, in which the particle spacing of the MICA changed 41 nm within 10 min in response to 1 mM CLI, and the structural color of the MICA changed from blue, green, to yellow, and finally, to red. Furthermore, MICA was also used to detect a similar antibiotic, lincomycin, which had only induced a 10 nm change in the spacing. The MICA was reused more than 5 times. This low-cost and naked-eye sensing material provides a label-free way to detect CLI and other antibiotics.

Graphical abstract: Fabrication of an antibiotic-sensitive 2D-molecularly imprinted photonic crystal

Article information

Article type
Paper
Submitted
01 Agd 2019
Accepted
05 Cax 2019
First published
06 Cax 2019

Anal. Methods, 2019,11, 2875-2879

Fabrication of an antibiotic-sensitive 2D-molecularly imprinted photonic crystal

Y. Wang, J. Fan, Z. Meng, M. Xue and L. Qiu, Anal. Methods, 2019, 11, 2875 DOI: 10.1039/C9AY00674E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements