Issue 47, 2016

One-step electrodeposition of a nickel cobalt sulfide nanosheet film as a highly sensitive nonenzymatic glucose sensor

Abstract

In this communication, we demonstrate that a nickel cobalt sulfide nanosheet film electrodeposited on a titanium mesh (Ni–Co–S/TM) exhibits high catalytic activity toward electrooxidation of glucose. As a nonenzymatic glucose sensor, this Ni–Co–S/TM catalyst electrode shows a wide linear response range of 0.001–3 mM, a low limit of detection of 0.12 μM with a signal-to-noise ratio of 3, a sensitivity of 3291.5 μA mM−1 cm−2, and a fast response time of less than 5 s. Moreover, it also demonstrates high selectivity, good reproducibility and long-term stability for glucose detection.

Graphical abstract: One-step electrodeposition of a nickel cobalt sulfide nanosheet film as a highly sensitive nonenzymatic glucose sensor

Supplementary files

Article information

Article type
Communication
Submitted
12 Qad 2016
Accepted
20 Dit 2016
First published
21 Dit 2016

J. Mater. Chem. B, 2016,4, 7540-7544

One-step electrodeposition of a nickel cobalt sulfide nanosheet film as a highly sensitive nonenzymatic glucose sensor

X. Cao, K. Wang, G. Du, A. M. Asiri, Y. Ma, Q. Lu and X. Sun, J. Mater. Chem. B, 2016, 4, 7540 DOI: 10.1039/C6TB01736C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements