Issue 28, 2014

CoNiO2/TiN–TiOxNy composites for ultrahigh electrochemical energy storage and simultaneous glucose sensing

Abstract

We report a rational growth of functional CoNiO2/TiN–TiOxNy composites on flexible Ni foam for ultrahigh energy storage with fast charging capability and simultaneous non-enzymatic glucose detection. The TiN–TiOxNy intermediate layer provides both fast electron transport and a uniform growth substrate for polycrystalline mesoporous CoNiO2 NWs, at the same time preventing corrosion of the Ni substrate. Ultrahigh areal pseudocapacitance of 3181 and 2763 F g−1 (or 3.36 and 2.83 F cm−2) is obtained from the CoNiO2/TiN–TiOxNy composite at current densities of 2 and 10 mA cm−2, respectively; these values are substantially better than those obtained from the plain CoNiO2 NWs at the same current densities. Furthermore, the CoNiO2/TiN–TiOxNy composite exhibits high flexibility and cycling stability, and can be charged up to 1.64 F cm−2 within 9 seconds at a high current density of 100 mA cm−2. Moreover, after being fully charged, the CoNiO2/TiN–TiOxNy composite-based pseudocapacitors can maintain an extended discharge time of hundreds to thousands of seconds, and are demonstrated as power-free sensors for real-time electrochemical detection of glucose, with a detection limit of ∼1 μM.

Graphical abstract: CoNiO2/TiN–TiOxNy composites for ultrahigh electrochemical energy storage and simultaneous glucose sensing

Supplementary files

Article information

Article type
Paper
Submitted
19 Nah 2014
Accepted
14 Agd 2014
First published
16 Agd 2014

J. Mater. Chem. A, 2014,2, 10904-10909

CoNiO2/TiN–TiOxNy composites for ultrahigh electrochemical energy storage and simultaneous glucose sensing

Z. Peng, D. Jia, J. Tang, Y. Wang, Y. Wang, L. Zhang and G. Zheng, J. Mater. Chem. A, 2014, 2, 10904 DOI: 10.1039/C4TA00875H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements