Issue 2, 2014

In-atomizer atom trapping on gold nanoparticles for sensitive determination of mercury by flow injection cold vapor generation atomic absorption spectrometry

Abstract

An in-atomizer atom trapping method based on coating gold nanoparticles onto the inner wall of a quartz tube atomizer was firstly developed and combined with flow injection cold vapor generation for the accurate determination of mercury at low μg L−1 levels by atomic absorption spectrometry. Mercury vapor generated by reducing Hg2+ with hydrochloric acid–tetrahydroborate was efficiently trapped on the surface of gold nanoparticles that were coated on the interior wall of the quartz tube atomizer prior to the determination. In situ desorption and determination of mercury was achieved by increasing the voltage (thus the temperature) to 30 V. The influence of instrumental parameters and experimental conditions on the generation, trapping and desorption of mercury vapor, as well as interference from concomitant elemental ions was investigated. A detection limit of 0.01 μg L−1 was obtained based on a 5.0 mL sampling volume. The precision was better than 4.0% at 0.5 μg L−1. Three spiked water samples and two Certified Reference Materials (dogfish muscle, DORM-4 and human hair powder GBW07601a) were analyzed to validate the accuracy of the proposed method.

Graphical abstract: In-atomizer atom trapping on gold nanoparticles for sensitive determination of mercury by flow injection cold vapor generation atomic absorption spectrometry

Article information

Article type
Technical Note
Submitted
08 Way 2013
Accepted
28 Xim 2013
First published
29 Xim 2013

J. Anal. At. Spectrom., 2014,29, 367-373

In-atomizer atom trapping on gold nanoparticles for sensitive determination of mercury by flow injection cold vapor generation atomic absorption spectrometry

M. Peng, Z. Li, X. Hou and C. Zheng, J. Anal. At. Spectrom., 2014, 29, 367 DOI: 10.1039/C3JA50286D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements