Issue 12, 2012

Atomic spectrometry update. Industrial analysis: metals, chemicals and advanced materials

Abstract

This review period has shown several areas of growth. The increase in popularity of LIBS continues as the problems, both real and perceived, that are associated with it (e.g., that it is capable only of qualitative analyses) are overcome. The area that appears to have seen the greatest increase in LIBS work is the nuclear industry. Presumably this is because of the stand-off ability of the technique. Another technique that is increasing in popularity is continuum source AAS. This has found substantial use in several areas of the review, notably the fuels and the organic chemicals sections. As noted in the review, the technique allows similar multi-elemental detection to ICP-OES (albeit at lower sensitivity), but at AAS running costs and is therefore likely to remain a popular technique. The necessity of causing no or minimal damage to forensic samples and for samples of archaeological or historical importance is still paramount. Therefore, micro-sampling techniques such as LIBS, LA and various X-ray-based techniques are still popular. Since the reliability of the data obtained from hand-held/portable XRF instruments has improved significantly in recent times, the use of these can be regarded as almost routine. Also noted in the review is the propensity for using multiple techniques, often simultaneously, to characterize materials more fully and more rapidly. This is the latest review covering atomic spectrometric measurements of industrial materials, metals, chemicals and advanced materials. It follows on from last year's review1 and should be read in conjunction with other reviews in the series.2–5 This year has seen the departure of Sian Shore from the writing team. Her efforts over the last few years have been very much appreciated.

Graphical abstract: Atomic spectrometry update. Industrial analysis: metals, chemicals and advanced materials

Article information

Article type
Atomic Spectrometry Update
Submitted
24 Way 2012
Accepted
24 Way 2012
First published
16 Dit 2012

J. Anal. At. Spectrom., 2012,27, 2003-2053

Atomic spectrometry update. Industrial analysis: metals, chemicals and advanced materials

S. Carter, A. S. Fisher, M. W. Hinds and S. Lancaster, J. Anal. At. Spectrom., 2012, 27, 2003 DOI: 10.1039/C2JA90058K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements