DOI:
10.1039/D4QI00644E
(Research Article)
Inorg. Chem. Front., 2024,
11, 3435-3445
A bimetallic CoZn metal–organic-framework derived CoZnS@NSC Co-catalyst loaded on g-C3N4 for significantly augmented photocatalytic H2 evolution†
Received
12th March 2024
, Accepted 22nd April 2024
First published on 24th April 2024
Abstract
The main existing issues in graphitic carbon nitride (g-C3N4) based photocatalytic hydrogen (H2) production include poor separation and transfer of photogenerated charge carriers and low optical absorption. Thus, the construction of a multicomponent co-catalyst and its integration with g-C3N4 to facilitate the transport and separation of photoexcited charge carriers are regarded as a promising approach for augmenting the photocatalytic H2 production activity. In this study, we report CoZnS@NSC-X/g-C3N4 (where X indicates sulfidation times of 15, 30, 45, and 60 min) nanocomposites constructed from a CoZn-MOF derived CoS2, Co3S4 and ZnS intercalated nitrogen/sulfur-doped carbon (CoZnS@NSC) nanoparticle co-catalyst and g-C3N4 for H2 production from water splitting. The maximum photocatalytic H2 evolution rate (610.8 μmol h−1 g−1) of the CoZnS@NSC-15/g-C3N4 heterostructure, with an optimized CoZnS@NSC loading of 10 wt% and 15 min sulfidation, is nearly 3.7 and 290.9 times higher than those of unsulfidated CoZn@NC/g-C3N4 and bare g-C3N4, respectively. This significantly boosted photocatalytic performance is attributed to the efficient separation and transfer of electron–hole (e−/h+) pairs and electronic conductivity caused by the appropriate sulfidation time and loading amount of CoZnS@NSC nanoparticles. This work offers a facile approach to designing metal–organic framework derived co-catalyst modified semiconductor-based photocatalysts for high-performance in practical applications.
1. Introduction
The growing need for energy and the rising environmental crisis have led to substantial attention toward the exploration of sustainable energy sources.1,2 At present, H2 energy is considered as the cleanest fuel since its only combustion byproduct is water.3 The promising strategy of visible-light driven photocatalytic H2 production from water splitting, which utilizes abundant solar energy has attracted considerable attention.4,5 Various semiconductors, including TiO2, CdS, ZnO, and g-C3N4 have been employed to achieve photocatalytic H2 production.6–8 Nevertheless, there are still many challenges in the practical applications of these semiconductors that need to be addressed, such as the development of cost-effective and efficient photocatalysts with enhanced e−/h+ separation efficiency.9 Among these, g-C3N4 has attracted significant attention due to its suitable energy band position, good chemical stability, cost-effectiveness, and simple preparation process.10,11 However, the poor optical absorption and rapid recombination of photogenerated e−/h+ pairs of g-C3N4 hinder its photocatalytic activity. Therefore, various modification strategies have been employed to improve the visible-light response and photogenerated e−/h+ separation efficiency of g-C3N4, such as doping with heteroatoms,12,13 modulation of morphology,14,15 construction of heterojunctions,16–18 and loading of co-catalysts.19,20 Meanwhile, due to the difficulties of separating photogenerated e−/h+ pairs and the strong driving force of redox reactions, g-C3N4 continues to rely on noble metal co-catalysts and sacrificial agents to achieve efficient photocatalytic H2 production from water splitting.21–23 Recently, in most photocatalytic H2 production processes, the noble metal Pt served as a co-catalyst. The incorporation of noble metal nanoparticles onto the g-C3N4 surface effectively reduced the overpotential in H2 evolution, thereby promoting the photocatalytic H2 generation efficiency from water. Nevertheless, the shortage and high cost of noble metals have seriously hindered their large-scale applications in photocatalytic H2 evolution. Consequently, economical non-noble metal co-catalysts, such as MoS2, NiS, Cu3P, and CoP,24–27 have been employed as alternatives to noble metals, thus promoting the photocatalytic performance.
Indeed, co-catalysts play a key role in augmenting the photocatalytic performance of photocatalysts. It has been found that multi-component co-catalysts exhibit higher photocatalytic activity and charge transfer efficiency compared to single-component co-catalysts. Peng et al.28 synthesized NiCoP-fabricated g-C3N4, which demonstrated elevated photocatalytic activity compared to Ni2P and CoP-fabricated g-C3N4. Specifically, Co-based composites (CoP, CoS2, Co3S4etc.) have gained extensive research attention owing to their promising photocatalytic performance and environment-friendly characteristics. Ji et al.29 reported ZIF-67 derived N,P-doped composites of C-incorporated CoP/Co nanoparticles to boost the photocatalytic performance of g-C3N4. The Munichandraiah30 group reported that the prepared Ni–Co–S electrocatalysts significantly boost H2 generation. Typically, the construction of bimetallic sulfides by integrating transition metal elements such as Mn, Fe, Co, Ni, and Zn achieved boosted photocatalytic performance.31 Based on their electronic configuration, transition metal species have a large number of unpaired d-orbital electrons, which can readily promote the chemisorption of H2, making it possible to catalyze the H2 generation.32 Nowadays, bimetallic sulfides are being extensively employed as catalysts for electrocatalytic H2 evolution reaction, while relatively less research has been reported for photocatalytic H2 production. Furthermore, in the construction of bimetallic sulfide/g-C3N4 composite photocatalysts, the poor contact at the interface during the reaction process results in severe aggregation of bimetallic sulfide, thus influencing the catalytic activity. Therefore, it is essential to hybridize bimetallic sulfides with carbonaceous materials via an efficient approach to address this challenge.33
Recently, metal–organic-framework (MOF) materials have emerged as a class of crystalline organic–inorganic hybrid materials composed of metal ions and organic ligands, and are widely used in many fields due to their special metallic framework structure.34–37 However, MOF materials are rarely applied directly to H2 production from water splitting because of their poor intrinsic electrical conductivity and stability, as well as the fact that the reactive metal center can be blocked by organic ligands.38,39 MOF materials formed by the coordination of transition metals with organic ligands have been widely used as templates or precursors for the synthesis of transition metal@porous carbon-based composites by thermal decomposition of the carbonized original skeleton.40,41 The derivatives of the MOF materials including oxides,42 sulfides,43,44 and phosphides45,46 can be well dispersed in a porous carbon substrate. Generally, the inherent hierarchical pore structure and large specific surface area of the MOF precursor can expose more catalytic sites. Carbon-based materials serve as efficient co-catalysts with g-C3N4, capturing electrons quickly and accelerating the separation of photogenerated charges, besides serving as an intermediate bridge in the photocatalytic water splitting over g-C3N4,47–49 resulting in high photocatalytic activity. Therefore, decorating g-C3N4 with a porous polyhedral co-catalyst with several active layers could be more effective at boosting its photocatalytic performance.
Zeolite imidazolium framework (ZIF) materials are zeolite-like three-dimensional topological MOF materials with high metal ion content and abundant carbon and nitrogen ligands. These features make them excellent precursor templates for constructing metal@porous carbon-based composites.50,51 However, ZIF-67 and ZIF-8 possess similar crystal structures with transition metals Co and Zn as central ions. This resemblance allows the preparation of Co/Zn bimetallic MOF materials, which can be used as precursors for the synthesis of bimetallic sulfides. Herein, a nanocomposite of nitrogen/sulfur-doped carbon-encapsulated CoS2, Co3S4, and ZnS nanoparticles was derived from ZIF-67 and ZIF-8 via an annealing–sulfurization strategy (CoZnS@NSC). Then the obtained CoZnS@NSC nanoparticles were used as a multicomponent co-catalyst for g-C3N4 to promote its photocatalytic hydrogen production performance. A series of CoZnS@NSC-X/g-C3N4 (X indicates the sulfidation times of 10, 15, 30, and 60 min) photocatalysts were designed, and they show enhanced photocatalytic H2 generation activity from water splitting under visible-light (λ ≥ 400 nm) compared to bare g-C3N4. The optimal CoZnS@NSC-15/g-C3N4 exhibits the highest photocatalytic H2 evolution rate (610.8 μmol h−1 g−1), which is 290.9 and 3.7 times higher than those of bare g-C3N4 and unsulfidated CoZn@NC/g-C3N4 samples. This significantly steered photocatalytic activity is associated with the synergistic effect generated by the firm interaction of CoS2, Co3S4, and ZnS nanoparticles with the carbon substrate and its integration with g-C3N4.
2. Experimental section
2.1 Synthesis of pure g-C3N4
In a typical synthesis procedure, 10 g of urea was introduced into an alumina crucible. The crucible was then placed in a muffle furnace and subjected to calcination under an air atmosphere at 550 °C for 4 hours with a ramp rate of 5 °C min−1. Afterward, the material was cooled naturally to ambient temperature, resulting in a pale-yellow product.
2.2 Preparation of the CoZn-MOF
Firstly, Co(NO3)2·6H2O (291 mg) and Zn(NO3)2·6H2O (149 mg) were mixed in 35 mL of methanol and thoroughly stirred. Then, 2-methylimidazole (492 mg) was dissolved in 35 mL of methanol to form a transparent solution and quickly transferred to the first solution followed by stirring for 30 minutes and maintained at room temperature for 24 hours. Afterward, the mixed solution was centrifuged at 10
000 RPM, resulting in a white precipitate, followed by washing with methanol several times and the purple powder was dried in a vacuum oven at 40 °C overnight to obtain the CoZn-MOF.
2.3 Synthesis of CoZn@NC
The obtained CoZn-MOF powder was taken in a porcelain boat and then placed in the tube furnace followed by heating at 350 °C for 1.5 h with a ramp rate of 10 °C min−1 under a 5%H2/95%Ar atmosphere. Subsequently, it was naturally cooled to room temperature and then recalcined at 550 °C for 3.5 h. The resulting carbonized CoZn-MOF samples were obtained and indicated as CoZn@NC.
2.4 Synthesis of CoZnS@NSC
The CoZnS@NSC sample was synthesized by the sulfidation reaction of CoZn@NC with L-cysteine. The method involved pouring CoZn@NC and L-cysteine in a mass ratio of 1
:
5 into two porcelain boats, and then placing them side by side in the middle of a tube furnace, which was heated to 350 °C for 15, 30, 45, and 60 min under an Ar atmosphere at a ramp rate of 10 °C min−1. Finally, it was cooled down to room temperature, and the resulting composite was named CoZnS@NSC-X, where X (X = 15, 30, 45, and 60 min) represents the duration of the sulfidation reaction.
2.5 Synthesis of CoZnS@NSC/g-C3N4
The resultant CoZnS@NSC (20 mg) and g-C3N4 (180 mg) were mixed in a mortar containing 1 mL of ethanol and then vigorously ground for 1 h until the ethanol solution evaporated to produce a powder followed by drying in a vacuum oven at 40 °C for 2 h. The obtained samples were labeled as CoZnS@NSC-X/g-C3N4, where X is the sulfide reaction time. The counterpart CoZn@NC/g-C3N4 was obtained by grinding the same mass ratio of CoZn@NC and g-C3N4.
3. Results and discussion
According to our design scheme, composite co-catalysts of nitrogen/sulfur-doped carbon wrapped CoS2, Co3S4, and ZnS nanoparticles derived from ZIF-67 and ZIF-8 with the addition of L-cysteine were prepared via the simple annealing–sulfurization strategy and used to modify g-C3N4 to form nanocomposite photocatalysts, and the preparation process is illustrated in Fig. 1a (see details in the Experimental section). Firstly, the successful assembly of the CoZn-MoF was obtained using Co(NO3)2·6H2O, Zn(NO3)2·6H2O, and 2-methylimidazole in methanol according to a previous report.52 Secondly, the CoZn-MOF precursor was subjected to annealing to achieve the carbonized CoZn@NC nanoparticles. Then, CoZnS@NSC-X (where X = 15, 30, 45, and 60 min, which indicate the sulfidation times) was achieved via a simple sulfidation of CoZn@NC. Finally, CoZnS@NSC-X/g-C3N4 was obtained through mixing of CoZnS@NSC-X with a specific amount of g-C3N4 in a mortar followed by drying in a microwave oven. As depicted in Fig. S1,† thermogravimetric analysis (TGA) tests reveal that the designed CoZn@NC/g-C3N4 and CoZnS@NSC-15/g-C3N4 nanoheterostructures exhibit robust and high stability around 500 °C, which is relatively similar to that of bare g-C3N4.
![image file: d4qi00644e-f1.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f1.gif) |
| Fig. 1 (a) Schematic diagram of the synthesis of CoZn-MOF, CoZn@NC, CoZn@NC/g-C3N4, CoZnS@NSC, and CoZnS@NSC-X/g-C3N4 samples. XRD patterns of (b) CoZn@NC, CoZnS@NSC-15, and CoZnS@NSC-60 nanoparticles and (c) g-C3N4 (A), CoZn@NC/g-C3N4 (B), and CoZnS@NSC/g-C3N4 after sulfidation for 15 (C), 30 (D), 45 (E), and 60 min (F). | |
The phase purity and crystal structure of the as-synthesized samples were determined using X-ray diffraction (XRD). As presented in Fig. 1b, the sharp peaks of Co and Zn can be seen in CoZn@NC (Co: JCPDS 15-0806, Zn: JCPDS 04-0831). For the sulfidated CoZnS@NSC-15 and CoZnS@NSC-60 samples, the sharp diffraction peaks of CoS2, Co3S4, and ZnS can be clearly observed, which are in alignment with the characteristic peaks of the standard cards for CoS2 (JCPDS: 41-1471), Co3S4 (JCPDS: 47-1738), and ZnS (JCPDS: 36-1450). However, no diffraction peaks of metallic Co and Zn nanoparticles are observed, suggesting that Co and Zn were completely converted to sulfides after sulfidation treatment. Fig. 1c shows the XRD patterns of pristine g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-X/g-C3N4 photocatalysts. For bare g-C3N4, two distinctive diffraction peaks are detected at 12.8° (100) and 27.7° (002), corresponding to the in-plane structural packing of tri-s-triazine units and internal-layer packing of carbon nitride, respectively.53 The XRD patterns of CoZnS@NSC-X/g-C3N4 samples reveal the existence of both characteristic peaks associated with pristine g-C3N4. In addition, the diffraction peaks for CoS2, Co3S4, and ZnS can be clearly observed with the increase in the sulfidation time. This result indicates the successful loading of CoZnS@NSC onto g-C3N4.
Furthermore, the structures of CoZn@NC and CoZnS@NSC-15 were further analyzed using Raman spectroscopy (Fig. S2†). For both CoZn@NC and CoZnS@NSC-15 samples, the presence of nitrogen/sulfur co-doped carbon (NSC) is confirmed by the identification of two peaks at 1330 and 1575 cm−1, which correspond to the D and G bands, respectively.29,54 Moreover, the ratio of the peak intensity of the D and G bands (ID/IG) can serve as a metric for measuring the degree of disorder in carbon materials.55–57 The measured ID/IG value for CoZnS@NSC-15 is 0.95, which is slightly higher than that of unsulfidated CoZn@NC (0.91). This increment is associated with the sulfidation treatment of CoZn@NC, resulting in a rise in carbon defects and disorder in the nanoparticles, which obviously promote the electronic properties of the nanocomposites.
The morphologies of the as-obtained samples were examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy dispersive X-ray spectroscopy (EDX). The SEM image (Fig. 2a) shows the successful synthesis of CoZn-MoF nanoparticles, indicating a uniform and consistent polyhedral morphology. The SEM image of the synthesized CoZn@NC illustrates a rough surface embedded by the constructed nitrogen-doped carbon (NC); in addition it shows a smaller diameter than the CoZn-MOF caused by the shrinkage of the material during the carbonization process (Fig. 2b), indicating that the carbonization treatment changed the ideal morphology of the CoZn-MoF precursor. As seen in Fig. 2c, the SEM image of sulfidated CoZnS@NSC-15 nanoparticles shows an irregular morphology, indicating that sulfidation treatment further altered the textural properties of the CoZn-MoF precursor. The SEM image of the CoZnS@NSC-15/g-C3N4 nanocomposite shows a typical layered nanosheet-like structure, although CoZnS@NSC-15 nanoparticles were no longer visible (Fig. 2d).
![image file: d4qi00644e-f2.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f2.gif) |
| Fig. 2 (a–d) SEM and (e–h) TEM images of CoZn-MoF, CoZn@NC, CoZnS@NSC-15, and CoZnS@NSC-15/g-C3N4 samples. (i) HRTEM image of the CoZnS@NSC-15/g-C3N4 sample. (j) HAADF-STEM and its corresponding EDX elemental images of the CoZnS@NSC-15/g-C3N4 sample. | |
The TEM images of CoZn-MOF, CoZn@NC, and CoZnS@NSC-15 samples are demonstrated in Fig. 2e–g, which are consistent with the SEM results. However, the TEM image of CoZnS@NSC-15/g-C3N4 clearly showed the presence of CoZnS@NSC-15 nanoparticles (Fig. 2h). As depicted in Fig. 2i, the HRTEM image of CoZnS@NSC-15/g-C3N4 clearly demonstrates that ZnS, Co3S4, and CoS2 nanoparticles are uniformly distributed in the g-C3N4 framework. Moreover, the different lattice spacings observed from the figure correspond to the (110) and (002) crystal planes of ZnS, the (200) and (210) crystal planes of CoS2, and the (400) crystal plane of Co3S4, respectively. Furthermore, HAADF-STEM images and their corresponding EDX elemental mapping images obviously show the uniform distribution of C, N, S, Co, and Zn elements in the CoZnS@NSC-15/g-C3N4 nanocomposite (Fig. 2j). As shown in Fig. S3,† EDX spectral analysis shows that the atomic ratio of Zn and Co in the product is about 1
:
2, which is in agreement with our feeding ratio. Taken together, the morphological results confirm the successful synthesis of CoZnS@NSC-15/g-C3N4.
The specific surface area, pore size distribution, and pore volume of the as-prepared samples were tested using N2 adsorption–desorption isotherms. As shown in Fig. S4,† all samples exhibit type IV sorption isotherms with H3 hysteresis loops, indicating the presence of mesopores in the material.58,59 According to the Brunauer–Emmett–Teller (BET) calculation method and the BJH pore size distribution, the specific surface area, pore volume, and pore size distribution of the as-prepared material were calculated.60 The as-synthesized CoZnS@NSC-15/g-C3N4 shows a slightly higher specific surface area (83 m2 g−1) compared to g-C3N4 (76 m2 g−1) and CoZn@NC/g-C3N4 (80 m2 g−1), as presented in Table S1.† However, the pore size distribution curve shows that the pore size distribution and pore volume of CoZnS@NSC-15/g-C3N4 are rather smaller than those of g-C3N4 and CoZn@NC/g-C3N4, as displayed in Fig. S5 and Table S1.† This may be caused by the collapse of the pores in CoZn@NC during the sulfidation process. This high specific surface area and the presence of a large number of microporous structures provide a good basis for excellent photocatalytic performance.
The chemical composition and states of the as-obtained samples were measured using X-ray photoelectron spectroscopy (XPS). The XPS survey spectra of g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-15/g-C3N4 are presented in Fig. 3a. The XPS survey spectra of bare g-C3N4 confirm the presence of C, N, and O elements; the CoZn@NC/g-C3N4 composite shows the presence of C, N, O, Co, and Zn elements, while the sulfidated CoZnS@NSC-15/g-C3N4 nanocomposite shows the presence of C, N, O, S, Co, and Zn elements. As presented in Fig. 3b, the enlarged survey spectrum clearly demonstrates the presence of the S element in the CoZnS@NSC-15/g-C3N4 nanocomposite, while no S element is identified in g-C3N4 and CoZn@NC/g-C3N4 samples. Similarly, the presence of Co and Zn elements can be clearly seen in CoZn@NC/g-C3N4 and CoZnS@NSC-15/g-C3N4, while no Co and Zn elements are detected in bare g-C3N4. The high-resolution C 1s spectra of CoZnS@NSC-15/g-C3N4 show four peaks at 284.5, 285.2, 288.4, and 293.9 eV (Fig. 3c), which are associated with C–C/C
C, C–N/C
N, N–C
N, and carbon satellite peaks, respectively. As depicted in Fig. 3d, the N 1s spectra of CoZnS@NSC-15/g-C3N4 display four peaks at 398.8, 400.1, 401.2, and 404.6 eV, which are assigned to N/C–N
C, N–(C)3, N/C–N–H, and π-excitation, respectively.50,61 As presented in Fig. 3e, the O 1s spectra are deconvoluted into one peak (532.3 eV),62,63 which is attributed to the lattice oxygen atoms within the CoZnS@NSC-15/g-C3N4 system. The S 2p spectrum is deconvoluted into three peaks at 161.7, 163.2, and 168.3 eV (Fig. 3f), which are attributed to S 2p3/2, S 2p1/2, and satellite peaks of S 2p, respectively.64,65 The high-resolution Co 2p spectra are divided into six peaks, as displayed in Fig. 3g. The peaks at 782.0 and 798.9 eV are associated with Co2+, whereas the peaks at 778.3 and 793.9 eV are ascribed to Co3+.66 Moreover, the peaks at 786.6 and 803.4 eV are the satellite peaks of Co2+ and Co3+, respectively.67,68 The cobalt ions exhibit two valence states, which is consistent with the XRD detection of Co3S4. The Zn 2p spectra (Fig. 3h) are divided into two firm peaks at 1021.5 and 1044.6 eV, which are assigned to Zn 2p3/2 and Zn 2p1/2, thus indicating the presence of Zn2+ ions within the CoZnS@NSC-15/g-C3N4 system.64,69
![image file: d4qi00644e-f3.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f3.gif) |
| Fig. 3 (a) XPS survey spectrum and (b) enlarged S 2p, Co 2p, and Zn 2p of g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-15/g-C3N4 samples. High-resolution XPS spectra of (c) C 1s, (d) N 1s, (e) O 1s, (f) S 2p, (g) Co 2p, and (h) Zn 2p for the CoZnS@NSC-15/g-C3N4 nanocomposite. | |
The optical absorption properties of the synthesized photocatalysts were examined using ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). In contrast to g-C3N4 and CoZn@NC/g-C3N4, the CoZnS@NSC-X/g-C3N4 sample exhibited a red shift and improved light absorption in the visible range with increasing CoZnS@NSC sulfidation treatment time (Fig. 4a). This result proves the successful introduction of CoZnS@NSC onto the g-C3N4 surface, which significantly promoted visible-light absorption. The energy band gap (Eg) of g-C3N4 was estimated based on the UV-vis absorption spectra using the Tauc model. As presented in Fig. S6a,† the energy band gap of g-C3N4 is found to be 3.02 eV via extrapolation of the linear component of the (αhv)2versus (hv) curve. Based on the valence band (VB) XPS spectra (Fig. S6b†), the valence band energy (EVB) of g-C3N4 is estimated to be 2.26 eV, while the conduction band energy (ECB) is typically calculated by subtracting Eg from EVB; thus the ECB of g-C3N4 is found to be −0.76 eV.
![image file: d4qi00644e-f4.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f4.gif) |
| Fig. 4 (a) UV-Vis DRS spectra of the as-prepared samples. (b) Onset level of the secondary electron cutoff of the UPS spectra of g-C3N4, CoZn@NC, and CoZnS@NSC-15 nanoparticles. | |
To deeply understand the charge behavior, ultraviolet photoelectron spectroscopy (UPS) with a monochromatic HeI light source (21.22 eV) was employed to evaluate the band configurations of g-C3N4, CoZn@NC and CoZnS@NSC-15 nanoparticles. According to the equation, Φ = 21.22 − Ecutoff,70 the work function (Φ) of g-C3N4 is found to be 4.30 eV versus normalized hydrogen electrode (NHE), which is in agreement with the test results of previous studies (Fig. 4b).71 According to previous studies, the Φ values of CoS2, Co3S4, and ZnS are higher than that of g-C3N4,72–74 which confirms the rapid migration of charge carriers from g-C3N4 to sulfides, which inherently steers the spatial separation of photogenerated e−/h+ pairs. As displayed in Fig. 4b, the Φ values of CoZn@NC and CoZnS@NSC-15 are 4.87 eV and 4.45 eV, respectively. Fig. S7† shows that the Φ values of CoZnS@NSC-30, CoZnS@NSC-45, and CoZnS@NSC-60 with longer sulfidation time are 4.42, 4.38, and 4.35 eV, respectively, which proves that the internal built-in electric-field intensity decreases at the interface between g-C3N4 and CoZnS@NSC with an increasing sulfidation time. This leads to a reduction in the efficiency of photoexcited charge carriers, which in turn gradually decreases the photocatalytic H2 production activity with increasing sulfidation duration.
Photoluminescence (PL) tests evaluated the effectiveness of photogenerated e−/h+ pairs. Fig. 5a shows the PL spectra of the g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-15/g-C3N4 samples. The as-synthesized samples display a prominent peak around 435 nm. It is noteworthy that the peak intensity of CoZnS@NSC-15/g-C3N4 significantly reduced compared to those of bare g-C3N4 and unsulfidated CoZn@NC/g-C3N4, suggesting that sulfidated CoZnS@NSC nanoparticles are beneficial for hindering e−/h+ pair recombination. Additionally, time-resolved photoluminescence (TRPL) spectra were collected to determine the lifetime of photogenerated charge carriers. Fig. 5b and Table S2† show that g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-15/g-C3N4 have excited state lifetimes of 2.95 ± 0.49 ns, 2.42 ± 0.41 ns, and 1.65 ± 0.33 ns. This decrease in lifetime indicates the rapid migration and separation efficiency of photogenerated charge carriers. This result suggests that the incorporation of CoZnS@NSC onto g-C3N4 is more beneficial for lowering the charge carrier lifetime to that of unsulfidated CoZn@NC, which promotes charge transfer and separation.
![image file: d4qi00644e-f5.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f5.gif) |
| Fig. 5 (a) PL emission spectra, (b) TRPL decay spectra, (c) TPR, and (d) EIS Nyquist curves of g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-15/g-C3N4. | |
Furthermore, the charge carrier characteristics of g-C3N4, CoZn@NC/g-C3N4, and CoZnS@NSC-15/g-C3N4 photocatalysts were examined by a photocurrent test conducted in a traditional three-electrode cell with multiple on–off visible-light irradiation stages. As depicted in Fig. 5c, the transient photocurrent response (TPR) of CoZnS@NSC-15/g-C3N4 > CoZn@NC/g-C3N4 > g-C3N4 indicates the substantial improvements in the separation and transport of photoexcited e−/h+ pairs in the presence of CoZnS@NSC as compared to those of CoZn@NC nanoparticles. In addition, the electrochemical impedance spectroscopy (EIS) Nyquist measurements were carried out to assess the interfacial charge-migration resistance of the as-obtained samples. The EIS Nyquist plot obviously shows that CoZnS@NSC-15/g-C3N4 has a smaller angle radius than CoZn@NC/g-C3N4 and g-C3N4 (Fig. 5d), indicating that the incorporation of CoZnS@NSC significantly lowers charge migration resistance and boosts electronic conductivity. Overall, the TPR and EIS results show that the introduction of CoZnS@NSC into g-C3N4 promotes photogenerated e−/h+ pairs, leading to enhanced photocatalytic H2 generation.
The photocatalytic H2 production activity with visible-light illumination was measured to obtain the optimal H2 production conditions and to compare the H2 production rates of different samples. As presented in Fig. 6a, among the tested sacrificial agents, the suitable redox potential of triethanolamine (TEOA) and the basic environment created can significantly increase the photocatalytic hydrogen production. Additionally, the remarkable hydrophilic properties of TEOA make it more susceptible to be adsorbed on the g-C3N4 surface. Taken together, these aspects establish TEOA as an effective sacrificial agent for g-C3N4. Furthermore, a series of comparative experiments were conducted to determine the optimal weight content of CoZnS@NSC-15 (Fig. S8†). The result indicates that 10% is the optimal weight content of the CoZnS@NSC-15 cocatalyst in CoZnS@NSC-15/g-C3N4 nanocomposites. When the loading amount of ConZnS@NSC-15 on g-C3N4 is further increased, the photocatalytic activity for H2 production shows a decreasing trend. Fig. 6b depicts the H2 production performance of the as-prepared photocatalysts. For bare g-C3N4, negligible H2 production occurred due to the rapid recombination of charge carriers and low visible-light adsorption. It was also found that the rate of photocatalytic H2 evolution initially increases and then decreases with increasing sulfidation time. The optimal sample CoZnS@NSC-15/g-C3N4 exhibits the highest H2 evolution rate (610.8 μmol h−1 g−1) among all the as-prepared photocatalysts, which is almost 290.9 and 3.7-fold higher than those of bare g-C3N4 and CoZn@NC/g-C3N4, respectively. Noticeably, the photocatalytic performance of CoZnS@NSC-15/g-C3N4 exceeds that of previously reported co-catalyst modified g-C3N4-based photocatalysts (Table S3†). The results demonstrate the significance of an optimal sulfidation time of CoZnS@NSC nanoparticles in enhancing the photocatalytic H2 evolution activity of CoZnS@NSC-X/g-C3N4.
![image file: d4qi00644e-f6.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f6.gif) |
| Fig. 6 (a) Photocatalytic H2 evolution rates over the CoZnS@NSC-15/g-C3N4 composite employing various sacrificial agents. (b) H2 generation rates over g-C3N4, CoZn@NC/g-C3N4 and CoZnS@NSC-X/g-C3N4 after sulfidation for 15, 30, 45, and 60 min. (c) Wavelength-dependent AQY values of H2 evolution for the CoZnS@NSC-15/g-C3N4 sample. (d) Photocatalytic H2 stability test of the CoZnS@NSC-15/g-C3N4 photocatalyst. | |
The apparent quantum yield (AQY) of CoZnS@NSC-15/g-C3N4 was determined at different monochromatic light illumination wavelengths (λ = 400, 420, 450, 500, 550, and 600 ± 5 nm). As demonstrated in Fig. 6c, the maximum AQY of 2.85% was observed at a wavelength of 400 nm. It is notable that the AQY decreases with the increasing value of wavelength, which is consistent with the UV-vis absorption spectra of the ConZnS@NSC-15/g-C3N4 photocatalyst. The recycling experiments were performed to evaluate the stability of the CoZnS@NSC-15/g-C3N4 photocatalyst. Fig. 6d shows that no obvious decrease in H2 evolution is noticed even after 4 repeated cycles in the same environment. The XRD and high-resolution XPS spectroscopy (Fig. S9 and S10†) evaluation of the CoZnS@NSC-15/g-C3N4 sample after the stability experiment shows no significant alteration compared to that before the stability experiment. This result suggests that the CoZnS@NSC-15/g-C3N4 photocatalyst preserves outstanding stability for large-scale photocatalytic H2 generation.
The polymeric g-C3N4 with a suitable band gap can be promoted to excited states to generate e−/h+ pairs by visible-light irradiation. Nevertheless, these photogenerated charge carriers within the stimulated g-C3N4 quickly recombine in the absence of a co-catalyst, resulting in a poor photocatalytic H2 evolution performance. Therefore, a possible mechanism is proposed for photocatalytic H2 evolution over CoZnS@NSC-/g-C3N4 nanocomposites based on the above results and discussion, as illustrated in Fig. 7. Under visible-light irradiation, the transition of electrons occurs from the valence band (VB) of g-C3N4 to its conduction band (CB), while leaving holes in the VB. Then, since the Φ values of CoS2, Co3S4, and ZnS NPs are higher than that of g-C3N4,71–74 the electrons in the CB of g-C3N4 rapidly migrate to the CoZnS@NSC intermediates to produce H2. Simultaneously, the holes in the VB of g-C3N4 are consumed by the TEOA to maintain the charge carrier equilibrium. Taken together, the integration of CoZnS@NSC with g-C3N4 results in an efficient charge carrier migration induced by the difference in their work functions, which intrinsically facilitates the spatial separation of photoinduced e−/h+ pairs and thus promotes the efficiency of photocatalytic H2 production.
![image file: d4qi00644e-f7.tif](/image/article/2024/QI/d4qi00644e/d4qi00644e-f7.gif) |
| Fig. 7 Schematic charge carrier transfer mechanism of photocatalytic H2 evolution under visible-light irradiation over CoZnS@NSC/g-C3N4 nanocomposites. | |
3. Conclusions
In summary, bimetallic CoZn-MOF derived sulfidated CoZnS@NSC nanoparticles were effectively synthesized and then integrated with g-C3N4 as a highly efficient co-catalyst for photocatalytic H2 production from water splitting under visible-light irradiation (λ ≥ 400 nm). The optimized CoZnS@NSC-15/g-C3N4 nanocomposite exhibits a significantly enhanced photocatalytic H2 evolution rate (610.8 μmol h−1 g−1), which is nearly 3.7 and 290.9-fold greater than those of CoZn@NC/g-C3N4 (165.3 μmol h−1 g−1) and g-C3N4 (2.1 μmol h−1 g−1), respectively. The PL, TRPL, TPR, and EIS Nyquist results demonstrated efficient separation and transport of photoexcited charge carriers. Overall, the augmented photocatalytic performance of the CoZnS@NSC-15/g-C3N4 heterostructure is attributed to the enhanced visible-light absorption, rapid electron migration, efficient separation of photoexcited charge carriers, and synergistic effects of the sulfidated CoZnS@NSC-15 co-catalyst and g-C3N4 photocatalyst. In our designed CoZnS@NSC-15/g-C3N4 system, g-C3N4 served as the key light absorption material for producing e−/h+ pairs, and then bimetallic CoZnS@NSC nanoparticles captured the photogenerated electrons which served as the reaction active centers for H+ reduction and H2 production. This study provides new insights into the synergistic effects of bimetallic MOF-derived multicomponent co-catalysts and semiconductor materials for augmenting the visible-light driven photocatalytic H2 production from water splitting and other potential applications.
Author contributions
X.J.L. and I.U. contributed equally to this work. A. W. X. conceived and coordinated all stages of this research. X. J. L. and I. U. prepared, characterized the catalysts, performed all experiments, and written manuscript. J. H. L., S. C. and C. Z. Y participated in some experiments. All the authors were actively involved in development of the manuscript.
Conflicts of interest
The authors declare no competing financial interests.
Acknowledgements
The authors gratefully acknowledge the special funding support from the National Natural Science Foundation of China (22271266), the USTC-Yanchang Petroleum New Energy Joint Research Project (2022ZKD-02), and the Fundamental Research Funds for the Central Universities (YD2340002001).
References
- C. Xia, H. Wang, J. K. Kim and J. Wang, Rational Design of Metal Oxide-Based Heterostructure for Efficient Photocatalytic and Photoelectrochemical Systems, Adv. Funct. Mater., 2021, 31, 2008247 CrossRef CAS.
- T. Liang, Y. Liu, P. Zhang, C. Liu, F. Ma, Q. Yan and Z. Dai, Interface and valence modulation on scalable phosphorene/phosphide lamellae for efficient water electrolysis, Chem. Eng. J., 2020, 395, 124976 CrossRef CAS.
- L. Cao, I. K. M. Yu, X. Xiong, D. C. W. Tsang, S. Zhang, J. H. Clark, C. Hu, Y. H. Ng, J. Shang and Y. S. Ok, Biorenewable hydrogen production through biomass gasification: A review and future prospects, Environ. Res., 2020, 186, 109547 CrossRef CAS PubMed.
- J. A. Turner, Sustainable Hydrogen Production, Science, 2004, 305, 972–974 CrossRef CAS PubMed.
- H. Wang, X. Hu, Y. Ma, D. Zhu, T. Li and J. Wang, Nitrate-group-grafting-induced assembly of rutile TiO2 nanobundles for enhanced photocatalytic hydrogen evolution, Chin. J. Catal., 2020, 41, 95–102 CrossRef CAS.
- Y.-J. Yuan, D. Chen, Z.-T. Yu and Z.-G. Zou, Cadmium sulfide-based nanomaterials for photocatalytic hydrogen production, J. Mater. Chem. A, 2018, 6, 11606–11630 RSC.
- Z. Wang, C. Li and K. Domen, Recent developments in heterogeneous photocatalysts for solar-driven overall water splitting, Chem. Soc. Rev., 2019, 48, 2109–2125 RSC.
- S. Ma, Y. Deng, J. Xie, K. He, W. Liu, X. Chen and X. Li, Noble-metal-free Ni3C cocatalysts decorated CdS nanosheets for high-efficiency visible-light-driven photocatalytic H2 evolution, Appl. Catal., B, 2018, 227, 218–228 CrossRef CAS.
- D. Ma, Z. Zhang, Y. Zou, J. Chen and J.-W. Shi, The progress of g-C3N4 in photocatalytic H2 evolution: From fabrication to modification, Coord. Chem. Rev., 2024, 500, 215489 CrossRef CAS.
- Z. Wang, M. Murugananthan and Y. Zhang, Graphitic carbon nitride based photocatalysis for redox conversion of arsenic(III) and chromium(VI) in acid aqueous solution, Appl. Catal., B, 2019, 248, 349–356 CrossRef CAS.
- Y.-N. Liu, C.-C. Shen, N. Jiang, Z.-W. Zhao, X. Zhou, S.-J. Zhao and A.-W. Xu, g-C3N4 Hydrogen-Bonding Viologen for Significantly Enhanced Visible-Light Photocatalytic H2 Evolution, ACS Catal., 2017, 7, 8228–8234 CrossRef CAS.
- X.-X. Fang, L.-B. Ma, K. Liang, S.-J. Zhao, Y.-F. Jiang, C. Ling, T. Zhao, T.-Y. Cheang and A.-W. Xu, The doping of phosphorus atoms into graphitic carbon nitride for highly enhanced photocatalytic hydrogen evolution, J. Mater. Chem. A, 2019, 7, 11506–11512 RSC.
- J. Gao, Y. Wang, S. Zhou, W. Lin and Y. Kong, A Facile One-Step Synthesis of Fe-Doped g-C3N4 Nanosheets and Their Improved Visible-Light Photocatalytic Performance, ChemCatChem, 2017, 9, 1708–1715 CrossRef CAS.
- Y.-S. Jun, E. Z. Lee, X. Wang, W. H. Hong, G. D. Stucky and A. Thomas, From Melamine-Cyanuric Acid Supramolecular Aggregates to Carbon Nitride Hollow Spheres, Adv. Funct. Mater., 2013, 23, 3661–3667 CrossRef CAS.
- Y. Xing, X. Wang, S. Hao, X. Zhang, X. Wang, W. Ma, G. Zhao and X. Xu, Recent advances in the improvement of g-C3N4 based photocatalytic materials, Chin. Chem. Lett., 2021, 32, 13–20 CrossRef CAS.
- I. Ullah, C. Ling, J.-H. Li, X.-J. Lu, Z. Yang, G. Wang and A.-W. Xu, Metallic TiN nanoparticles loaded on g-C3N4 for plasmon enhanced visible and NIR photocatalytic H2 evolution from water splitting, Inorg. Chem. Front., 2023, 10, 3326–3334 RSC.
- Y. Lv, D. Ma, K. Song, S. Mao, Z. Liu, D. He, X. Zhao, T. Yao and J.-W. Shi, Graphitic carbon nitride decorated with C–N compounds broken by s-triazine unit as homojunction for photocatalytic H2 evolution, J. Mater. Chem. A, 2023, 11, 800–808 RSC.
- Y. Lv, D. Ma, C. Yang, K. Song, L. Shi, Y. Cheng, C. Niu and J.-W. Shi,
In situ construction of lead-free halide perovskite CsCu2I3/g-C3N4 heterojunction for photocatalytic H2 generation, Sep. Purif. Technol., 2023, 316, 123813 CrossRef CAS.
- B.-B. Xu, X.-B. Fu, X.-M. You, E. Zhao, F.-F. Li, Z. Chen, Y.-X. Li, X. L. Wang and Y.-F. Yao, Synergistic Promotion of Single-Atom Co Surrounding a PtCo Alloy Based On a g-C3N4 Nanosheet for Overall Water Splitting, ACS Catal., 2022, 12, 6958–6967 CrossRef CAS.
- J. Luo, H. Han, X. Wang, X. Qiu, B. Liu, Y. Lai, X. Chen, R. Zhong, L. Wang and C. Wang, Single-atom Nb anchored on graphitic carbon nitride for boosting electron transfer towards improved photocatalytic performance, Appl. Catal., B, 2023, 328, 122495 CrossRef CAS.
- M. Kombo, H.-B. Chong, L.-B. Ma, S. Sahar, X.-X. Fang, T. Zhao, C. Ling, X.-J. Lu and A.-W. Xu, Graphitic Carbon Nitride Decorated with Nickel(II)-(3-Pyridyl) Benzimidazole Complexes and Pt Nanoparticles as a Cocatalyst for Photocatalytic Hydrogen Production from Water Splitting, ACS Appl. Nano Mater., 2020, 3, 10659–10667 CrossRef CAS.
- A. Mishra, A. Mehta, S. Basu, N. P. Shetti, K. R. Reddy and T. M. Aminabhavi, Graphitic carbon nitride (g-C3N4)–based metal-free photocatalysts for water splitting: A review, Carbon, 2019, 149, 693–721 CrossRef CAS.
- S. Sun, X. Zhang, X. Liu, L. Pan, X. Zhang and J. Zou, Design and Construction of Cocatalysts for Photocatalytic Water Splitting, Acta Phys.-Chim. Sin., 2020, 36, 1905007 Search PubMed.
- C. Li, Y. Du, D. Wang, S. Yin, W. Tu, Z. Chen, M. Kraft, G. Chen and R. Xu, Unique P–Co–N Surface Bonding States Constructed on g-C3N4 Nanosheets for Drastically Enhanced Photocatalytic Activity of H2 Evolution, Adv. Funct. Mater., 2017, 27, 1604328 CrossRef.
- Z. Liang, B. Sun, X. Xu, H. Cui and J. Tian, Metallic 1T-phase MoS2 quantum dots/g-C3N4 heterojunctions for enhanced photocatalytic hydrogen evolution, Nanoscale, 2019, 11, 12266–12274 RSC.
- R. Shen, J. Xie, Y. Ding, S.-y. Liu, A. Adamski, X. Chen and X. Li, Carbon Nanotube-Supported Cu3P as High-Efficiency and Low-Cost Cocatalysts for Exceptional Semiconductor-Free Photocatalytic H2 Evolution, ACS Sustainable Chem. Eng., 2019, 7, 3243–3250 CrossRef CAS.
- T. Chen, C. Song, M. Fan, Y. Hong, B. Hu, L. Yu and W. Shi,
In situ fabrication of CuS/g-C3N4 nanocomposites with enhanced photocatalytic H2-production activity via photoinduced interfacial charge transfer, Int. J. Hydrogen Energy, 2017, 42, 12210–12219 CrossRef CAS.
- Y. Peng, L. Zhou, L. Wang, J. Lei, Y. Liu, S. Daniele and J. Zhang, Preparation of NiCoP-decorated g-C3N4 as an efficient photocatalyst for H2O2 production, Res. Chem. Intermed., 2019, 45, 5907–5917 CrossRef CAS.
- Q. Ji, L. Pan, J. Xu, C. Wang and L. Wang, Zeolitic Imidazolate Framework-67-Derived CoP/Co@N,P-Doped Carbon Nanoparticle Composites with Graphitic Carbon Nitride for Enhanced Photocatalytic Production of H2 and H2O2, ACS Appl. Nano Mater., 2020, 3, 3558–3567 CrossRef CAS.
- A. Irshad and N. Munichandraiah, Electrodeposited Nickel–Cobalt–Sulfide Catalyst for the Hydrogen Evolution Reaction, ACS Appl. Mater. Interfaces, 2017, 9, 19746–19755 CrossRef CAS PubMed.
- X. Gao, J. Wang, D. Zhang, K. Adair, K. Feng, N. Sun, H. Zheng, H. Shao, J. Zhong, Y. Ma, X. Sun and X. Sun, Carbon coated bimetallic sulfide nanodots/carbon nanorod heterostructure enabling long-life lithium-ion batteries, J. Mater. Chem. A, 2017, 5, 25625–25631 RSC.
- H.-W. Man, C.-S. Tsang, M. M.-J. Li, J. Mo, B. Huang, L. Y. S. Lee, Y.-c. Leung, K.-Y. Wong and S. C. E. Tsang, Transition metal-doped nickel phosphide nanoparticles as electro- and photocatalysts for hydrogen generation reactions, Appl. Catal., B, 2019, 242, 186–193 CrossRef CAS.
- K. Wu, Z. Chen, W.-C. Cheong, S. Liu, W. Zhu, X. Cao, K. Sun, Y. Lin, L. Zheng, W. Yan, Y. Pan, D. Wang, Q. Peng, C. Chen and Y. Li, Toward Bifunctional Overall Water Splitting Electrocatalyst: General Preparation of Transition Metal Phosphide Nanoparticles Decorated N-Doped Porous Carbon Spheres, ACS Appl. Mater. Interfaces, 2018, 10, 44201–44208 CrossRef CAS PubMed.
- L. Kong, M. Zhong, W. Shuang, Y. Xu and X.-H. Bu, Electrochemically active sites inside crystalline porous materials for energy storage and conversion, Chem. Soc. Rev., 2020, 49, 2378–2407 RSC.
- L. Cheng, Q. Zhang, M. Xu, Q. Zhai and C. Zhang, Two-for-one strategy: Three-dimensional porous Fe-doped Co3O4 cathode and N-doped carbon anode derived from a single bimetallic metal-organic framework for enhanced hybrid supercapacitor, J. Colloid Interface Sci., 2021, 583, 299–309 CrossRef CAS PubMed.
- X. Ge, H. Di, P. Wang, X. Miao, P. Zhang, H. Wang, J. Ma and L. Yin, Metal–Organic Framework-Derived Nitrogen-Doped Cobalt Nanocluster Inlaid Porous Carbon as High-Efficiency Catalyst for Advanced Potassium–Sulfur Batteries, ACS Nano, 2020, 14, 16022–16035 CrossRef CAS PubMed.
- M. Ding, R. W. Flaig, H.-L. Jiang and O. M. Yaghi, Carbon capture and conversion using metal–organic frameworks and MOF-based materials, Chem. Soc. Rev., 2019, 48, 2783–2828 RSC.
- W. Zhou, D.-D. Huang, Y.-P. Wu, J. Zhao, T. Wu, J. Zhang, D.-S. Li, C. Sun, P. Feng and X. Bu, Stable Hierarchical Bimetal–Organic Nanostructures as High Performance Electrocatalysts for the Oxygen Evolution Reaction, Angew. Chem., Int. Ed., 2019, 58, 4227–4231 CrossRef CAS PubMed.
- B. Chen, D. Kim, Z. Zhang, M. Lee and K. Yong, MOF-derived NiCoZnP nanoclusters anchored on hierarchical N-doped carbon nanosheets array as bifunctional electrocatalysts for overall water splitting, Chem. Eng. J., 2021, 422, 130533 CrossRef CAS.
- Q. Wang and D. Astruc, State of the Art and Prospects in Metal–Organic Framework (MOF)-Based and MOF-Derived Nanocatalysis, Chem. Rev., 2020, 120, 1438–1511 CrossRef CAS PubMed.
- Z. Chen, H. Qing, K. Zhou, D. Sun and R. Wu, Metal-organic framework-derived nanocomposites for electrocatalytic hydrogen evolution reaction, Prog. Mater. Sci., 2020, 108, 100618 CrossRef CAS.
- J. Zhao, X. Zhang, M. Liu, Y.-Z. Jiang, M. Wang, Z.-Y. Li and Z. Zhou, Metal–organic-framework-derived porous 3D heterogeneous NiFex/NiFe2O4@NC nanoflowers as highly stable and efficient electrocatalysts for the oxygen-evolution reaction, J. Mater. Chem. A, 2019, 7, 21338–21348 RSC.
- Z. Chen, R. Wu, H. Wang, Y. Jiang, L. Jin, Y. Guo, Y. Song, F. Fang and D. Sun, Construction of hybrid hollow architectures by in situ rooting ultrafine ZnS nanorods within porous carbon polyhedra for enhanced lithium storage properties, Chem. Eng. J., 2017, 326, 680–690 CrossRef CAS.
- X. Sun, H. Huang, C. Wang, Y. Liu, T.-L. Hu and X.-H. Bu, Effective CoxSy HER Electrocatalysts Fabricated by In situ Sulfuration of a Metal-Organic Framework, ChemElectroChem, 2018, 5, 3639–3644 CrossRef CAS.
- L. Chai, Z. Hu, X. Wang, Y. Xu, L. Zhang, T.-T. Li, Y. Hu, J. Qian and S. Huang, Stringing Bimetallic Metal–Organic Framework-Derived Cobalt Phosphide Composite for High-Efficiency Overall Water Splitting, Adv. Sci., 2020, 7, 1903195 CrossRef CAS PubMed.
- J. Shi, F. Qiu, W. Yuan, M. Guo and Z.-H. Lu, Nitrogen-doped carbon-decorated yolk-shell CoP@FeCoP micro-polyhedra derived from MOF for efficient overall water splitting, Chem. Eng. J., 2021, 403, 126312 CrossRef CAS.
- H. Yu, R. Shi, Y. Zhao, G. I. N. Waterhouse, L.-Z. Wu, C.-H. Tung and T. Zhang, Smart Utilization of Carbon Dots in Semiconductor Photocatalysis, Adv. Mater., 2016, 28, 9454–9477 CrossRef CAS PubMed.
- J.-P. Zou, L.-C. Wang, J. Luo, Y.-C. Nie, Q.-J. Xing, X.-B. Luo, H.-M. Du, S.-L. Luo and S. L. Suib, Synthesis and efficient visible light photocatalytic H2 evolution of a metal-free g-C3N4/graphene quantum dots hybrid photocatalyst, Appl. Catal., B, 2016, 193, 103–109 CrossRef CAS.
- H. Che, G. Che, P. Zhou, C. Liu, H. Dong, C. Li, N. Song and C. Li, Nitrogen doped carbon ribbons modified g-C3N4 for markedly enhanced photocatalytic H2-production in visible to near-infrared region, Chem. Eng. J., 2020, 382, 122870 CrossRef CAS.
- Y. Pan, K. Sun, S. Liu, X. Cao, K. Wu, W.-C. Cheong, Z. Chen, Y. Wang, Y. Li, Y. Liu, D. Wang, Q. Peng, C. Chen and Y. Li, Core–Shell ZIF-8@ZIF-67-Derived CoP Nanoparticle-Embedded N-Doped Carbon Nanotube Hollow Polyhedron for Efficient Overall Water Splitting, J. Am. Chem. Soc., 2018, 140, 2610–2618 CrossRef CAS PubMed.
- J. Chang, Y. Wang, L. Chen, D. Wu, F. Xu, Z. Bai, K. Jiang and Z. Gao, Cobalt nanoparticles embedded nitrogen doped carbon, preparation from alkali deprotonation assisted ZIF-67 and its electrocatalytic performance in oxygen evolution reaction, Int. J. Hydrogen Energy, 2020, 45, 12787–12797 CrossRef CAS.
- H. Li, Y. Su, W. Sun and Y. Wang, Carbon Nanotubes Rooted in Porous Ternary Metal Sulfide@N/S-Doped Carbon Dodecahedron: Bimetal-Organic-Frameworks Derivation and Electrochemical Application for High-Capacity and Long-Life Lithium-Ion Batteries, Adv. Funct. Mater., 2016, 26, 8345–8353 CrossRef CAS.
- W. Sun, J. Zhu and Y. Zheng, Graphitic carbon nitride heterojunction photocatalysts for solar hydrogen production, Int. J. Hydrogen Energy, 2021, 46, 37242–37267 CrossRef CAS.
- J. Yan, Y. Huang, C. Chen, X. Liu and H. Liu, The 3D CoNi alloy particles embedded in N-doped porous carbon foams for high-performance microwave absorbers, Carbon, 2019, 152, 545–555 CrossRef CAS.
- Q. Jin, W. Li, K. Wang, P. Feng, H. Li, T. Gu, M. Zhou, W. Wang, S. Cheng and K. Jiang, Experimental design and theoretical calculation for sulfur-doped carbon nanofibers as a high performance sodium-ion battery anode, J. Mater. Chem. A, 2019, 7, 10239–10245 RSC.
- X. Sun, C. Wang, Y. Gong, L. Gu, Q. Chen and Y. Yu, A Flexible Sulfur-Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage, Small, 2018, 14, 1802218 CrossRef PubMed.
- Z. Hong, Y. Zhen, Y. Ruan, M. Kang, K. Zhou, J.-M. Zhang, Z. Huang and M. Wei, Rational Design and General Synthesis of S-Doped Hard Carbon with Tunable Doping Sites toward Excellent Na-Ion Storage Performance, Adv. Mater., 2018, 30, 1802035 CrossRef PubMed.
- Y. Li, S. Zhu, X. Kong, Y. Liang, Z. Li, S. Wu, C. Chang, S. Luo and Z. Cui, ZIF-67 derived Co@NC/g-C3N4 as a photocatalyst for enhanced water splitting H2 evolution, Environ. Res., 2021, 197, 111002 CrossRef CAS PubMed.
- J. Zhao, S. Hou, Y. Bai, Y. Lian, Q. Zhou, C. Ban, Z. Wang and H. Zhang, Multilayer dodecahedrons Zn-Co sulfide for supercapacitors, Electrochim. Acta, 2020, 354, 136714 CrossRef CAS.
- Z. Zhang, Y. Huang, X. Liu, C. Chen, Z. Xu and P. Liu, Zeolitic imidazolate frameworks derived ZnS/Co3S4 composite nanoparticles doping on polyhedral carbon framework for efficient lithium/sodium storage anode materials, Carbon, 2020, 157, 244–254 CrossRef CAS.
- H. Tang, R. Wang, C. Zhao, Z. Chen, X. Yang, D. Bukhvalov, Z. Lin and Q. Liu, Oxamide-modified g-C3N4 nanostructures: Tailoring surface topography for high-performance visible light photocatalysis, Chem. Eng. J., 2019, 374, 1064–1075 CrossRef CAS.
- L. Zhang, Z.-J. Zhao and J. Gong, Nanostructured Materials for Heterogeneous Electrocatalytic CO2 Reduction and their Related Reaction Mechanisms, Angew. Chem., Int. Ed., 2017, 56, 11326–11353 CrossRef CAS PubMed.
- L. Shen, H. Lv, S. Chen, P. Kopold, P. A. van Aken, X. Wu, J. Maier and Y. Yu, Peapod-like Li3VO4/N-Doped Carbon Nanowires with Pseudocapacitive Properties as Advanced Materials for High-Energy Lithium-Ion Capacitors, Adv. Mater., 2017, 29, 1700142 CrossRef PubMed.
- H. Tong, W. Bai, S. Yue, Z. Gao, L. Lu, L. Shen, S. Dong, J. Zhu, J. He and X. Zhang, Zinc cobalt sulfide nanosheets grown on nitrogen-doped graphene/carbon nanotube film as a high-performance electrode for supercapacitors, J. Mater. Chem. A, 2016, 4, 11256–11263 RSC.
- X. Yang, C. Cai, Y. Zou, C. Xiang, H. Chu, E. Yan, S. Qiu, L. Sun, F. Xu and X. Hu, Co3O4-doped two-dimensional carbon nanosheet as an electrode material for high-performance asymmetric supercapacitors, Electrochim. Acta, 2020, 335, 135611 CrossRef CAS.
- Y. Liu, G. Jiang, S. Sun, B. Xu, J. Zhou, Y. Zhang and J. Yao, Growth of NiCo2S4 nanotubes on carbon nanofibers for high performance flexible supercapacitors, J. Electroanal. Chem., 2017, 804, 212–219 CrossRef CAS.
- Y. Zou, C. Cai, C. Xiang, P. Huang, H. Chu, Z. She, F. Xu, L. Sun and H.-B. Kraatz, Simple synthesis of core-shell structure of Co–Co3O4 @ carbon-nanotube-incorporated nitrogen-doped carbon for high-performance supercapacitor, Electrochim. Acta, 2018, 261, 537–547 CrossRef CAS.
- H. Chen, M. Q. Wang, Y. Yu, H. Liu, S.-Y. Lu, S.-J. Bao and M. Xu, Assembling Hollow Cobalt Sulfide Nanocages Array on Graphene-like Manganese Dioxide Nanosheets for Superior Electrochemical Capacitors, ACS Appl. Mater. Interfaces, 2017, 9, 35040–35047 CrossRef CAS PubMed.
- L. Shen, J. Wang, G. Xu, H. Li, H. Dou and X. Zhang, NiCo2S4 Nanosheets Grown on Nitrogen-Doped Carbon Foams as an Advanced Electrode for Supercapacitors, Adv. Energy Mater., 2015, 5, 1400977 CrossRef.
- F. Shi, Z. Geng, K. Huang, Q. Liang, Y. Zhang, Y. Sun, J. Cao and S. Feng, Cobalt Nanoparticles/Black Phosphorus Nanosheets: An Efficient Catalyst for Electrochemical Oxygen Evolution, Adv. Sci., 2018, 5, 1800575 CrossRef PubMed.
- Q. Liu, C. Zeng, Z. Xie, L. Ai, Y. Liu, Q. Zhou, J. Jiang, H. Sun and S. Wang, Cobalt@nitrogen-doped bamboo-structured carbon nanotube to boost photocatalytic hydrogen evolution on carbon nitride, Appl. Catal., B, 2019, 254, 443–451 CrossRef CAS.
- Y. Xu and M. A. A. Schoonen, The absolute energy positions of conduction and valence bands of selected semiconducting minerals, Am. Mineral., 2000, 85, 543–556 CrossRef CAS.
- R. Karimi, F. Yousefi, M. Ghaedi, K. Dashtian and G. Yasin, Unveiling charge dynamics of Co3S4 nanowalls/CdS nanospheres n-n heterojunction for efficient photoelectrochemical Cr(VI) detoxification and N2 fixation, J. Environ. Chem. Eng., 2022, 10, 108549 CrossRef CAS.
- L. Pei, J. Zhong, T. Li, W. Bai, S. Wu, Y. Yuan, Y. Chen, Z. Yu, S. Yan and Z. Zou, CoS2@N-doped carbon core–shell nanorod array grown on Ni foam for enhanced electrocatalytic water oxidation, J. Mater. Chem. A, 2020, 8, 6795–6803 RSC.
Footnotes |
† Electronic supplementary information (ESI) available: Additional experimental and characterization results of TGA, Raman spectrum, EDX analysis, N2 adsorption–desorption isotherms, pore size distribution, Tauc plots, VB XPS, and UPS. Photocatalytic H2 evolution rate of CoZnS@NSC-15/g-C3N4 under various CoZnS@NSC-15 loading amounts. XRD and XPS spectra of CoZnS@NSC-15/g-C3N4 before and after the cycle test. Photocatalytic equipment image of our water splitting system. Comparison table of physicochemical properties and kinetic analysis of the emission decay of the as-prepared samples. Comparison table of our study's photocatalytic H2 evolution rate with previous reports. See DOI: https://doi.org/10.1039/d4qi00644e |
‡ These authors contributed equally to this work. |
|
This journal is © the Partner Organisations 2024 |