Issue 39, 2021

A do-it-yourself approach to achieving a flexible pressure sensor using daily use materials

Abstract

Flexible pressure sensors with excellent pressure sensing performance have been developed rapidly in recent years, but they still suffer from the disadvantages of a complex manufacturing process and high cost. Here, a flexible paper-based (PB) capacitive pressure sensor is constructed by using daily use materials such as paper, polyester conductive tape and polyimide tape. Thanks to the simplicity of the fabrication method, the proposed PB pressure sensor can be even fabricated via a do-it-yourself approach. The rough surface microstructure of paper and polyester conductive tape endows the PB pressure sensor with good pressure sensing performance properties. Specifically, the optimized PB pressure sensor with two-sided microstructure interfaces exhibits a wide pressure detection range (0.1–80 kPa), an acceptable sensitivity of 0.23 kPa−1 (0.1–2 kPa), a low detection limit of about 3 Pa, fast response speed (∼41 ms at the finger tapping), and good durability (5000 cycles at 10 kPa). The pressure sensing mechanism of the PB pressure sensor is explained by analyzing the in situ cross-sectional optical photographs and video of the sensor at different pressures. Like many flexible pressure sensors based on complex technologies and high cost, the PB pressure sensor has also been successfully applied in many application scenarios (e.g., finger bending, wrist pulse, nasal respiration, recording walking steps, early stage of Parkinson's disease, and proximity switch). Given the simple fabrication method, low cost and acceptable pressure sensing performance, we believe that the proposed PB pressure sensor is of extensive and practical application values in the field of wearable electronics and some underdeveloped areas, and is expected to help ordinary people become “home” engineers.

Graphical abstract: A do-it-yourself approach to achieving a flexible pressure sensor using daily use materials

Supplementary files

Article information

Article type
Paper
Submitted
03 Qad 2021
Accepted
26 Qad 2021
First published
31 Qad 2021

J. Mater. Chem. C, 2021,9, 13659-13667

A do-it-yourself approach to achieving a flexible pressure sensor using daily use materials

Z. Duan, Y. Jiang, Q. Huang, Z. Yuan, Q. Zhao, S. Wang, Y. Zhang and H. Tai, J. Mater. Chem. C, 2021, 9, 13659 DOI: 10.1039/D1TC03102C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements