Issue 33, 2020

Data-driven pilot optimization for electrochemical CO mass production

Abstract

Electroreduction systems to convert CO2 into CO via Ag electrodes have been intensely studied as a means of producing carbon-neutral fuels or chemical products. However, despite many efforts to maximize the performance of CO-producing systems, the performance of electrochemical cells that produce CO has not yet reached the level of economic viability. Moreover, compared with electrode development attempts, studies on the optimization of large-scale CO-producing systems are lacking, thus impeding the commercialization of electrochemical CO2 reduction systems. In this study, we present optimization results of a pilot-scale CO production system. Operating conditions such as pressure, temperature, and cell voltage were considered as the optimization variables to improve the CO partial current density. To facilitate experiment-based optimization of the pilot-scale operation, we adopted an efficient design of the experiment, for which data points were decided by input–output relations. As a result, the maximum CO partial current reached 2.56 A using a 50 cm2 electrode within 25 experiments. In addition, regression analysis results were provided for future studies on the systematic optimization of electrochemical systems. The operating temperature and CO2 solubility were more highly correlated with the current density and selectivity than was the applied cell voltage, and the CO current density could be predicted with high accuracy.

Graphical abstract: Data-driven pilot optimization for electrochemical CO mass production

Supplementary files

Article information

Article type
Paper
Submitted
04 Qas 2020
Accepted
17 Qad 2020
First published
17 Qad 2020

J. Mater. Chem. A, 2020,8, 16943-16950

Data-driven pilot optimization for electrochemical CO mass production

K. Kim, W. H. Lee, J. Na, Y. Hwang, H. Oh and U. Lee, J. Mater. Chem. A, 2020, 8, 16943 DOI: 10.1039/D0TA05607C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements