Issue 2, 2019

Strontium confinement in polyacrylic acid brushes: a soft nanoarchitectonics approach for the design of titania coatings with enhanced osseointegration

Abstract

Polyacrylic acid (PAA) brushes synthesized by reversible addition fragment chain transfer (RAFT) polymerization on titania (TiO2) surfaces were applied for the surface confinement and slow delivery of strontium (Sr2+) ions during the osseointegration process on TiO2 surfaces. Sr2+ is an essential element in the bone remodeling cycle and has large potential for application in therapies for bone-related diseases and bone replacement. Sr2+ complexation to the carboxylate groups of PAA was demonstrated by XPS while Sr2+ release in media was studied by ICP-MS. The Sr2+ concentration was varied by preparing PAA brushes at two grafting densities. At the higher grafting density, the brushes offer more carboxyl groups for Sr2+ binding. The architecture of the brushes and the amount of Sr2+ is controlled by the density of polymer chains. The morphology and brush thickness were characterized by AFM and ellipsometry. The significant effects of PAA brush coated TiO2 complexing Sr2+ on osteoblast cells is shown. The use of PAA brushes for Sr2+ confinement restricts Sr2+ activity to the cells in direct contact with the TiO2 surface. Initial adhesion of osteoblast cells is superior on coatings with brushes compared to bare TiO2. Moreover, a rather rapid cell tissue formation is observed for the cells cultured on the brushes with higher Sr2+ content. Enhanced biocompatibility and osseoactivity is confirmed by an increased alkaline phosphatase activity.

Graphical abstract: Strontium confinement in polyacrylic acid brushes: a soft nanoarchitectonics approach for the design of titania coatings with enhanced osseointegration

Article information

Article type
Paper
Submitted
15 Xim 2018
Accepted
08 Nah 2019
First published
08 Nah 2019

Mol. Syst. Des. Eng., 2019,4, 421-430

Strontium confinement in polyacrylic acid brushes: a soft nanoarchitectonics approach for the design of titania coatings with enhanced osseointegration

D. Gregurec, N. Politakos, L. Yate and S. E. Moya, Mol. Syst. Des. Eng., 2019, 4, 421 DOI: 10.1039/C8ME00089A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements